Re: [PATCH RESEND 3/3] Documentation: Add documentation for rt5033 multifunction device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Thank you for review.

On 01/07/2015 01:54 AM, Rob Herring wrote:
> On Mon, Jan 5, 2015 at 11:45 PM, Beomho Seo <beomho.seo@xxxxxxxxxxx> wrote:
>> This patch device tree binding documentation for rt5033 multifunction device.
>>
>> Cc: Sebastian Reichel <sre@xxxxxxxxxx>
>> Cc: Lee Jones <lee.jones@xxxxxxxxxx>
>> Cc: Mark Brown <broonie@xxxxxxxxxx>
>> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
>> Cc: Pawel Moll <pawel.moll@xxxxxxx>
>> Cc: Mark Rutland <mark.rutland@xxxxxxx>
>> Cc: Ian campbell <ijc+devicetree@xxxxxxxxxxxxxx>
>> Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
>> Signed-off-by: Beomho Seo <beomho.seo@xxxxxxxxxxx>
>> Acked-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
>> ---
>>  Documentation/devicetree/bindings/mfd/rt5033.txt   |  108 ++++++++++++++++++++
>>  .../devicetree/bindings/vendor-prefixes.txt        |    1 +
>>  2 files changed, 109 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/mfd/rt5033.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/rt5033.txt b/Documentation/devicetree/bindings/mfd/rt5033.txt
>> new file mode 100644
>> index 0000000..52a6d33
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/rt5033.txt
>> @@ -0,0 +1,108 @@
>> +Richtek RT5033 Power management Integrated Circuit
>> +
>> +RT5033 is a Multifunction device which includes battery charger, fuel gauge,
>> +flash LED current source, LDO and synchronous Buck converter for portable
>> +applications. It is interfaced to host controller using i2c interface.
>> +
>> +Required properties:
>> +- compatible : Must be "richtek,rt5033"
>> +- reg : Specifies the i2c slave address of general part.
>> +- interrupts : This i2c devices has an IRQ line connected to the main SoC.
>> +- interrupt-parent : The parent interrupt controller.
>> +
>> +Optional node:
>> +Regulators: The regulators of RT5033 have to be instantiated under sub-node
>> +named "regulators" usinge the following format.
> 
> s/usinge/using/
> 

I will fix wrong typo.

>> +
>> +       regulators {
>> +               regulator-name {
>> +                       regulator-name = LDO/BUCK
>> +                       regulator subnodes called X, Y and Z
>> +               };
>> +       };
>> +       refer Documentation/devicetree/bindings/regulator/regulator.txt
>> +
>> +
>> +Battery charger: There battery charger of RT5033 have to be instantiated under
>> +sub-node named "charger" using the following format.
>> +
>> +Required properties:
>> +- compatible : Must be "richtek,rt5033-charger".
>> +- richtek,pre-uamp : Current of pre-charge mode. The pre-charge current levels
>> +  are 350 mA to 650 mA programmed by I2C per 100 mA.
>> +- richtek,pre-threshold-uvolt : Voltage of threshold pre-charge mode. Battery
>> +  voltage is below pre-charge threshold voltage, the charger is in pre-charge
>> +  mode with pre-charge current. Its levels are 2.3 V  to 3.8 V programmed
>> +  by I2C per 0.1 V.
>> +- richtek,fast-uamp : Current of fast-charge mode. The fast-charge current
>> +  levels are 700 mA to 2000 mA programmed by I2C per 100 mA.
>> +- richtek,const-uvolt :  Battery regulation voltage of constant voltage mode.
>> +  This voltage level 3.65 V to 4.4 V bye I2C per 0.025 V.
>> +- richtek,eoc-uamp : This property is end of charge current. Its level 150 mA
>> +  to 200 mA.
> 
> Please align -uamp and -uvolt names with regulator binding suffixes.
> 

OK. I will fix it.

>> +       charger {
>> +               compatible = "richtek,rt5033-charger";
>> +               richtek,pre-uamp = <350000>;
>> +               richtek,pre-threshold-uvolt = <3400000>;
>> +               richtek,fast-uamp = <2000000>;
>> +               richtek,const-uvolt = <4350000>;
>> +               richtek,eoc-uamp = <250000>;
>> +       };
>> +
>> +
>> +Fuelgauge: There fuelgauge of RT5033 to be instantiated node named "fuelgauge"
>> +using the following format.
>> +
>> +Required properties:
>> +- compatible = Must be "richtek,rt5033-battery".
>> +
>> +       i2c_fuel: i2c@1 {
> 
> Drop the @1.
> 

OK. I will fix it.

>> +               compatible = "i2c-gpio";
>> +               standard i2c-gpio constraints...
>> +               fuelgauge {
>> +                       compatible = "richtek,rt5033-battery".
>> +               };
>> +       };
> 
> I'm a bit confused by this. The fuelgauge is an i2c device hanging off
> the rt5033 or a 2nd i2c slave on the rt5033?
>

It is 2nd i2c slave on the rt5033.

>> +
>> +
>> +Example:
>> +
>> +               rt5033@34 {
>> +                       compatible = "richtek,rt5033";
>> +                       reg = <0x34>;
>> +                       interrupt-parent = <&gpx1>;
>> +                       interrupts = <5 0>;
>> +
>> +                       regulators {
>> +                               buck_reg: BUCK {
>> +                                       regulator-name = "BUCK";
>> +                                       regulator-min-microvolt = <1200000>;
>> +                                       regulator-max-microvolt = <1200000>;
>> +                                       regulator-always-on;
>> +                               };
>> +                       };
>> +
>> +                       charger {
>> +                               compatible = "richtek,rt5033-charger";
>> +                               richtek,pre-uamp = <350000>;
>> +                               richtek,pre-threshold-uvolt = <3400000>;
>> +                               richtek,fast-uamp = <2000000>;
>> +                               richtek,const-uvolt = <4350000>;
>> +                               richtek,eoc-uamp = <250000>;
>> +                       };
>> +
>> +               };
>> +
>> +               i2c_fuel: i2c@10 {
>> +                       compatible = "i2c-gpio";
>> +                       gpios = <&gpm3 1 0
>> +                               &gpm3 0 0>;
>> +
>> +                       fuel: rt5033-battery@35 {
>> +                               compatible = "richtek,rt5033-battery";
>> +                               interrupt-parent = <&gpx2>;
>> +                               interrupts = <3 0>;
>> +                               reg = <0x35>;
>> +                       };
>> +               };
>> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
>> index 723999d..611b543 100644
>> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
>> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
>> @@ -124,6 +124,7 @@ ralink      Mediatek/Ralink Technology Corp.
>>  ramtron        Ramtron International
>>  realtek Realtek Semiconductor Corp.
>>  renesas        Renesas Electronics Corporation
>> +richtek        Richtek Technology Corporation
>>  ricoh  Ricoh Co. Ltd.
>>  rockchip       Fuzhou Rockchip Electronics Co., Ltd
>>  samsung        Samsung Semiconductor
>> --
>> 1.7.9.5
>>
> 

Best regards,
Beomho Seo

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux