[PATCH 1/2] arm64: dts: qcom: msm8916-longcheer-l8910: Enable RGB LED

[André Apitzsch <git@xxxxxxxxxxx>]

l8910 uses KTD2026 LED driver. Add it to the device tree.

Tested-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
Signed-off-by: André Apitzsch <git@xxxxxxxxxxx>
---
 .../boot/dts/qcom/msm8916-longcheer-l8910.dts      | 51 ++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
index 41cadb906b98..68258cf4205f 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
@@ -6,6 +6,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	model = "BQ Aquaris X5 (Longcheer L8910)";
@@ -74,6 +75,46 @@ usb_id: usb-id {
 	};
 };
 
+&blsp_i2c2 {
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "kinetic,ktd2026";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&status_led_default>;
+		pinctrl-names = "default";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
+};
+
 &blsp_i2c3 {
 	status = "okay";
 
@@ -107,6 +148,16 @@ &blsp_uart2 {
 	status = "okay";
 };
 
+&pm8916_gpios {
+	status_led_default: status-led-default-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <PM8916_GPIO_VPH>;
+		bias-disable;
+		output-high;
+	};
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;

-- 
2.42.0