V3: - Expands description of ports to clarify mapping of port to CSIPHY Rob - Adds the dependency link into the commit log of patch #3 - bod V2: - Drops specific sc8280xp-cci compat - Konrad - Drops minItems where maxItems are equal - Krzysztof - Uses suggested description for CAMSS - Krzysztof - Leaves indentation of ports/properties - Rob - NoISP. Supports bayer encoded upstream currently only - Krzysztof - Endpoint. Adds an example endpoint - Krzysztof Link next: https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/linux-next-23-10-10-sc8280xp-camss-v2 V1: The sc8280xp provides a standard Camera Control Interface and Camera SubSystem hardware interface similar to antecedent parts sdm845 and sm8250. Per the target segments for this part, sc8280xp has more of everything. More CCI, VFE, CSIPHY and therefore more interrupt lines and clocks to declare. CCI x 4 CSIPHY x 4 VFE x 4 VFE Lite x 4 CSID x 4 Bootable 6.5.y x13s: https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/lenovo-x13s-linux-6.5.y Linux next: https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/linux-next-23-10-06-sc8280xp-camss This patch depends-on: https://lore.kernel.org/lkml/20231004161853.86382-2-bryan.odonoghue@xxxxxxxxxx/T/ Bryan O'Donoghue (4): arm64: dts: qcom: sc8280xp: Add in CAMCC for sc8280xp arm64: dts: qcom: sc8280xp: camss: Add CCI definitions media: dt-bindings: media: camss: Add qcom,sc8280xp-camss binding arm64: dts: qcom: sc8280xp: camss: Add CAMSS block definition .../bindings/media/qcom,sc8280xp-camss.yaml | 582 ++++++++++++++++ arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 624 ++++++++++++++++++ 2 files changed, 1206 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml -- 2.40.1
