From: Schuyler Patton <spatton@xxxxxx>
Added pin mux definitions for collision and carrier sense errors coming
from the ethernet phy. Without these two signals the MAC ends up ignoring
the errors detected by the PHY which end up causing a lower throughput
problem when the phy is in half duplex mode such as connected through a hub.
Fixes: 2ba3549 (ARM: dts: am335x-bone*: add DT for BeagleBone Black)
Cc: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
Cc: Tom Rini <trini@xxxxxx>
Cc: Kevin Hilman <khilman@xxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx> # v3.13+
Signed-off-by: Schuyler Patton <spatton@xxxxxx>
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
arch/arm/boot/dts/am335x-bone-common.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 6cc25ed..4b29fad 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -97,6 +97,8 @@
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
+ 0x108 (PIN_INPUT | MUX_MODE0) /* mii1_col.mii1_col */
+ 0x10c (PIN_INPUT | MUX_MODE0) /* mii1_crs.mii1_crs */
0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */
0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */
0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */
@@ -116,6 +118,8 @@
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
+ 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
--
2.2.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
