Re: [PATCH v21 10/16] dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Host

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 11, 2023 at 12:54:59AM +0000, Yoshihiro Shimoda wrote:
> Hello Manivannan,
> 
> > From: Manivannan Sadhasivam, Sent: Tuesday, October 10, 2023 8:25 PM
> > To: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> > Cc: lpieralisi@xxxxxxxxxx; kw@xxxxxxxxx; robh@xxxxxxxxxx; bhelgaas@xxxxxxxxxx; krzysztof.kozlowski+dt@xxxxxxxxxx;
> > conor+dt@xxxxxxxxxx; jingoohan1@xxxxxxxxx; gustavo.pimentel@xxxxxxxxxxxx; marek.vasut+renesas@xxxxxxxxx;
> > linux-pci@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-renesas-soc@xxxxxxxxxxxxxxx; Geert Uytterhoeven
> > <geert+renesas@xxxxxxxxx>; Serge Semin <fancer.lancer@xxxxxxxxx>; Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> > Subject: Re: [PATCH v21 10/16] dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Host
> > 
> > On Fri, Sep 22, 2023 at 03:53:25PM +0900, Yoshihiro Shimoda wrote:
> > > Document bindings for Renesas R-Car Gen4 and R-Car S4-8 (R8A779F0)
> > > PCIe host module.
> > >
> > > Link:
> <snip URL>
> > > Link:
> <snip URL>
> > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> > > Signed-off-by: Krzysztof Wilczyński <kwilczynski@xxxxxxxxxx>
> > > Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> > > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> > > Reviewed-by: Serge Semin <fancer.lancer@xxxxxxxxx>
> > > Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> > > ---
> > >  .../bindings/pci/rcar-gen4-pci-host.yaml      | 127 ++++++++++++++++++
> > >  1 file changed, 127 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml
> > b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml
> > > new file mode 100644
> > > index 000000000000..ffb34339b637
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml

[...]

> > > +            #interrupt-cells = <1>;
> > > +            interrupt-map-mask = <0 0 0 7>;
> > > +            interrupt-map = <0 0 0 1 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
> > > +                            <0 0 0 2 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
> > > +                            <0 0 0 3 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
> > > +                            <0 0 0 4 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>;
> > 
> > I believe these are for legacy INTx interrupts. But you are using the same IRQ
> > number used for MSI above. Can you clarify?
> 
> On the SoC (R-Car S4-8), the same IRQ number is used for both MSI and legacy INTx
> interrupts...
> 

Ok. This seems wierd, but fine with me.

- Mani

-- 
மணிவண்ணன் சதாசிவம்




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux