On Thu, 5 Oct 2023 at 14:26, Chanh Nguyen <chanh@xxxxxxxxxxxxxxxxxxxxxx> wrote:
>
> Update GPIO line-name to follow naming convention specified at
> github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md
>
> Signed-off-by: Chanh Nguyen <chanh@xxxxxxxxxxxxxxxxxxxxxx>
Reviewed-by: Joel Stanley <joel@xxxxxxxxx>
> ---
> .../dts/aspeed/aspeed-bmc-ampere-mtjade.dts | 42 +++++++++----------
> .../aspeed/aspeed-bmc-ampere-mtmitchell.dts | 6 +--
> 2 files changed, 24 insertions(+), 24 deletions(-)
>
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts
> index 0a51d2e32fab..e57efcc8522a 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts
> @@ -760,30 +760,30 @@
>
> &gpio {
> gpio-line-names =
> - /*A0-A7*/ "","","","S0_BMC_SPECIAL_BOOT","","","","",
> - /*B0-B7*/ "BMC_SELECT_EEPROM","","","",
> - "POWER_BUTTON","","","",
> + /*A0-A7*/ "","","","host0-special-boot","","","","",
> + /*B0-B7*/ "i2c-backup-sel","","","",
> + "power-button","","","",
> /*C0-C7*/ "","","","","","","","",
> /*D0-D7*/ "","","","","","","","",
> /*E0-E7*/ "","","","","","","","",
> - /*F0-F7*/ "","","BMC_SYS_PSON_L","S0_DDR_SAVE","PGOOD",
> - "S1_DDR_SAVE","","",
> - /*G0-G7*/ "host0-ready","SHD_REQ_L","","S0_OVERTEMP_L","","",
> + /*F0-F7*/ "","","power-chassis-control","s0-ddr-save","power-chassis-good",
> + "s1-ddr-save","","",
> + /*G0-G7*/ "host0-ready","host0-shd-req-n","","s0-overtemp-n","","",
> "","",
> - /*H0-H7*/ "","","","","PSU1_VIN_GOOD","PSU2_VIN_GOOD","","",
> - /*I0-I7*/ "PSU1_PRESENT","PSU2_PRESENT","S1_BMC_SPECIAL_BOOT",
> - "","","","","",
> - /*J0-J7*/ "S0_HIGHTEMP_L","S0_FAULT_L","S0_SCP_AUTH_FAIL_L","",
> + /*H0-H7*/ "","","","","ps0-vin-good","ps1-vin-good","","",
> + /*I0-I7*/ "presence-ps0","presence-ps1","s1-special-boot",
> + "","","","","",
> + /*J0-J7*/ "s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n","",
> "","","","",
> /*K0-K7*/ "","","","","","","","",
> - /*L0-L7*/ "","","","BMC_SYSRESET_L","SPI_AUTH_FAIL_L","","","",
> + /*L0-L7*/ "","","","host0-sysreset-n","s0-spi-auth-fail-n","","","",
> /*M0-M7*/ "","","","","","","","",
> /*N0-N7*/ "","","","","","","","",
> /*O0-O7*/ "","","","","","","","",
> /*P0-P7*/ "","","","","","","","",
> - /*Q0-Q7*/ "","","","","","UID_BUTTON","","",
> - /*R0-R7*/ "","","BMC_EXT_HIGHTEMP_L","OCP_AUX_PWREN",
> - "OCP_MAIN_PWREN","RESET_BUTTON","","",
> + /*Q0-Q7*/ "","","","","","identify-button","","",
> + /*R0-R7*/ "","","ext-hightemp-n","",
> + "ocp-main-pwren","reset-button","","",
> /*S0-S7*/ "","","","","rtc-battery-voltage-read-enable","","","",
> /*T0-T7*/ "","","","","","","","",
> /*U0-U7*/ "","","","","","","","",
> @@ -791,18 +791,18 @@
> /*W0-W7*/ "","","","","","","","",
> /*X0-X7*/ "","","","","","","","",
> /*Y0-Y7*/ "","","","","","","","",
> - /*Z0-Z7*/ "S0_BMC_PLIMIT","S1_FAULT_L","S1_FW_BOOT_OK","","",
> - "S1_SCP_AUTH_FAIL_L","S1_OVERTEMP_L","",
> + /*Z0-Z7*/ "s0-plimit","s1-fault-alert","s1-fw-boot-ok","","",
> + "s1-sys-auth-failure-n","s1-overtemp-n","",
> /*AA0-AA7*/ "","","","","","","","",
> - /*AB0-AB7*/ "S1_HIGHTEMP_L","S1_BMC_PLIMIT","S0_BMC_DDR_ADDR",
> - "S1_BMC_DDR_ADR","","","","",
> - /*AC0-AC7*/ "SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L",
> - "BMC_OCP_PG";
> + /*AB0-AB7*/ "s1-hightemp-n","s1-plimit","s0-ddr-addr",
> + "s1-ddr-addr","","","","",
> + /*AC0-AC7*/ "sys-pwr-gd","","","","","","presence-cpu1",
> + "ocp-pgood";
>
> i2c4-o-en-hog {
> gpio-hog;
> gpios = <ASPEED_GPIO(Y, 2) GPIO_ACTIVE_HIGH>;
> output-high;
> - line-name = "BMC_I2C4_O_EN";
> + line-name = "i2c4-o-en";
> };
> };
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
> index 0715cb9ab30c..2f571b43106d 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
> @@ -599,17 +599,17 @@
> /*Q0-Q7*/ "","","","","","","","",
> /*R0-R7*/ "","","","","","","","",
> /*S0-S7*/ "","","identify-button","led-identify",
> - "s1-ddr-save","spi-nor-access","sys-pgood","presence-cpu1",
> + "s1-ddr-save","spi-nor-access","host0-ready","presence-cpu1",
> /*T0-T7*/ "","","","","","","","",
> /*U0-U7*/ "","","","","","","","",
> /*V0-V7*/ "s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
> - "host0-reboot-ack-n","host0-ready","host0-shd-req-n",
> + "host0-reboot-ack-n","s0-fw-boot-ok","host0-shd-req-n",
> "host0-shd-ack-n","s0-overtemp-n",
> /*W0-W7*/ "","ocp-main-pwren","ocp-pgood","",
> "bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel",
> /*X0-X7*/ "i2c-backup-sel","s1-fault-alert","s1-fw-boot-ok",
> "s1-hightemp-n","s0-spi-auth-fail-n","s1-sys-auth-failure-n",
> - "s1-overtemp-n","s1-spi-auth-fail-n",
> + "s1-overtemp-n","cpld-s1-spi-auth-fail-n",
> /*Y0-Y7*/ "","","","","","","","host0-special-boot",
> /*Z0-Z7*/ "reset-button","ps0-pgood","ps1-pgood","","","","","";
>
> --
> 2.17.1
>
