On Tue, Oct 10, 2023 at 01:51:22AM +0100, Kieran Bingham wrote:
> Add the bindings for the supply references used on the IMX335.
>
> Signed-off-by: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>
> ---
> .../bindings/media/i2c/sony,imx335.yaml | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
> index a167dcdb3a32..1863b5608a5c 100644
> --- a/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
> @@ -32,6 +32,15 @@ properties:
> description: Clock frequency from 6 to 27 MHz, 37.125MHz, 74.25MHz
> maxItems: 1
>
> + avdd-supply:
> + description: Analog power supply (2.9V)
> +
> + ovdd-supply:
> + description: Interface power supply (1.8V)
> +
> + dvdd-supply:
> + description: Digital power supply (1.2V)
> +
> reset-gpios:
> description: Reference to the GPIO connected to the XCLR pin, if any.
> maxItems: 1
> @@ -60,6 +69,9 @@ required:
> - compatible
> - reg
> - clocks
> + - avdd-supply
> + - ovdd-supply
> + - dvdd-supply
New required properties are an ABI break. That's fine only if you can
explain no one is using this binding.
> - port
>
> additionalProperties: false
> @@ -79,6 +91,10 @@ examples:
> assigned-clock-parents = <&imx335_clk_parent>;
> assigned-clock-rates = <24000000>;
>
> + avdd-supply = <&camera_vdda_2v9>;
> + ovdd-supply = <&camera_vddo_1v8>;
> + dvdd-supply = <&camera_vddd_1v2>;
> +
> port {
> imx335: endpoint {
> remote-endpoint = <&cam>;
> --
> 2.34.1
>
