On Mon, 2015-01-05 at 17:18 +0900, Joonyoung Shim wrote:
> Hi Sjoerd,
>
> On 12/05/2014 04:27 AM, Sjoerd Simons wrote:
> > Add DTS for the Hardkernel Odroid XU3. The name of the DTS file is kept the
> > same as the vendors naming, which means it's prefixed with exynos5422
> > instead of exynos5800 as the SoC name even though it includes the
> > exyno5800 dtsi.
> >
> > Signed-off-by: Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx>
> > ---
> > Changes since v1:
> > * Add chosen/linux,stdout-path to point the serial console device
> > * Change memory start offset to 0x40000000 to match the vendors DTS (pointed
> > out by Heesub Shin)
> > * Declare base address & size for the memory banks to be used by the MFC
> >
> > Kevin, Tyler, even though the changes are small i didn't want to just stick
> > your Tested-By on. Could you both be so kind to retest this on your XU3's ?
> >
> > Heesub, I would still love to know the reason for having the memory start
> > address at 0x40000000 for this board?
> >
> > arch/arm/boot/dts/Makefile | 1 +
> > arch/arm/boot/dts/exynos5422-odroidxu3.dts | 332 +++++++++++++++++++++++++++++
> > 2 files changed, 333 insertions(+)
> > create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu3.dts
> >
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index 38c89ca..0a898cc 100644
> > +
> > +&hdmi {
> > + status = "okay";
> > + hpd-gpio = <&gpx3 7 0>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&hdmi_hpd_irq>;
> > +
> > + vdd_osc-supply = <&ldo10_reg>;
> > + vdd_pll-supply = <&ldo8_reg>;
> > + vdd-supply = <&ldo8_reg>;
>
> ldo10 and ldo8 are right? I think ldo7 and ldo6 are related with hdmi
> from schematic.
Nice catch. I followed hardkernels dts here, which refers to ldo10 &
ldo8, however double-checking the schematics indeed indicate that ldo7
and ldo6 are used the HDMI supplies.
I'll do some testing and follow-up
--
Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx>
Collabora Ltd.
Attachment:
smime.p7s
Description: S/MIME cryptographic signature
