[PATCH v4 1/2] dt-bindings: backlight: Add MPS MP3309C

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The Monolithic Power (MPS) MP3309C is a WLED step-up converter, featuring a
programmable switching frequency to optimize efficiency.
The brightness can be controlled either by I2C commands (called "analog"
mode) or by a PWM input signal (PWM mode).
This driver supports both modes.

For device driver details, please refer to:
- drivers/video/backlight/mp3309c_bl.c

The datasheet is available at:
- https://www.monolithicpower.com/en/mp3309c.html

Signed-off-by: Flavio Suligoi <f.suligoi@xxxxxxx>
---

v4:
 - remove not more used allOf keyword
 - add brightness-levels and default-brightness properties
 - remove max-brightness and default-brightness from required properties
 - update example, adding brightness-levels and default-brightness properties
v3:
 - add default value for mps,overvoltage-protection-microvolt property
 - fix the example, changing from "mps,mp3309c-backlight" to "mps,mp3309c" in
   compatible property
v2:
 - remove useless properties (dimming-mode, pinctrl-names, pinctrl-0,
   switch-on-delay-ms, switch-off-delay-ms, reset-gpios, reset-on-delay-ms,
   reset-on-length-ms)
 - add common.yaml#
 - remove already included properties (default-brightness, max-brightness)
 - substitute three boolean properties, used for the overvoltage-protection
   values, with a single enum property
 - remove some conditional definitions
 - remove the 2nd example
v1:
 - first version

 .../bindings/leds/backlight/mps,mp3309c.yaml  | 82 +++++++++++++++++++
 1 file changed, 82 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml

diff --git a/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
new file mode 100644
index 000000000000..e2f9ae2b3fb4
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/mps,mp3309c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MPS MP3309C backlight
+
+maintainers:
+  - Flavio Suligoi <f.suligoi@xxxxxxx>
+
+description: |
+  The Monolithic Power (MPS) MP3309C is a WLED step-up converter, featuring a
+  programmable switching frequency to optimize efficiency.
+  It supports two different dimming modes:
+
+  - analog mode, via I2C commands, as default mode (32 dimming levels)
+  - PWM controlled mode (optional)
+
+  The datasheet is available at:
+  https://www.monolithicpower.com/en/mp3309c.html
+
+properties:
+  compatible:
+    const: mps,mp3309c
+
+  reg:
+    maxItems: 1
+
+  pwms:
+    description: if present, the backlight is controlled in PWM mode.
+    maxItems: 1
+
+  enable-gpios:
+    description: GPIO used to enable the backlight in "analog-i2c" dimming mode.
+    maxItems: 1
+
+  brightness-levels:
+    description:
+      Array of distinct brightness levels, in PWM dimming mode.
+      Typically these are in the range from 0 to 255, but any range starting
+      at 0 will do.
+      The 0 value means a 0% duty cycle (darkest/off), while the last value in
+      the array represents a 100% duty cycle (brightest).
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  default-brightness:
+    description:
+      The default brightness (index into the levels array).
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  mps,overvoltage-protection-microvolt:
+    description: Overvoltage protection (13.5V, 24V or 35.5V).
+    enum: [ 13500000, 24000000, 35500000 ]
+    default: 35500000
+
+  mps,no-sync-mode:
+    description: disable synchronous rectification mode
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Backlight with PWM control */
+        backlight_pwm: backlight@17 {
+            compatible = "mps,mp3309c";
+            reg = <0x17>;
+            pwms = <&pwm1 0 3333333 0>; /* 300 Hz --> (1/f) * 1*10^9 */
+            brightness-levels = <0 1 2 3 4 5 6 7 8 9 10>;
+            default-brightness = <8>;
+            mps,overvoltage-protection-microvolt = <24000000>;
+        };
+    };
-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux