A simple driver for a mini gamepad that communicates over i2c, the gamepad
has bidirectional thumb stick input and six buttons.
The gamepad chip utilizes the open framework from Adafruit called 'Seesaw'
to transmit the ADC data for the joystick and digital pin state for the
buttons. I have only implemented the functionality required to receive the
thumb stick and button state.
Steps in reading the gamepad state over i2c:
1. Reset the registers
2. Set the pin mode of the pins specified by the `BUTTON_MASK` to input
`BUTTON_MASK`: A bit-map for the six digital pins internally
connected to the joystick buttons.
3. Enable internal pullup resistors for the `BUTTON_MASK`
4. Bulk set the pin state HIGH for `BUTTON_MASK`
5. Poll the device for button and joystick state done by:
`seesaw_read_data(struct i2c_client *client, struct seesaw_data *data)`
Product page:
https://www.adafruit.com/product/5743
Arduino driver:
https://github.com/adafruit/Adafruit_Seesaw
Tested on RPi Zero 2W
Signed-off-by: Anshul Dalal <anshulusr@xxxxxxxxx>
---
.../bindings/input/adafruit_seesaw.yaml | 45 +++++++++++++++++++
1 file changed, 45 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/adafruit_seesaw.yaml
diff --git a/Documentation/devicetree/bindings/input/adafruit_seesaw.yaml b/Documentation/devicetree/bindings/input/adafruit_seesaw.yaml
new file mode 100644
index 000000000000..1d00d9da637a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adafruit_seesaw.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/input/adafruit_seesaw.yaml#";
+$schema: "http://devicetree.org/meta-schemas/core.yaml#";
+
+title: Adafruit Mini I2C Gamepad with seesaw
+
+maintainers:
+ - Anshul Dalal <anshulusr@xxxxxxxxx>
+
+description: |
+ Bindings for Adafruit Mini I2C Gamepad
+
+ +-----------------------------+
+ | ___ |
+ | / \ (X) |
+ | | S | __ __ (Y) (A) |
+ | \___/ |ST| |SE| (B) |
+ | |
+ +-----------------------------+
+
+ S -> 10-bit percision bidirectional analog joystick
+ ST -> Start
+ SE -> Select
+ X, A, B, Y -> Digital action buttons
+
+ Product page: https://www.adafruit.com/product/5743
+ Arduino Driver: https://github.com/adafruit/Adafruit_Seesaw
+
+properties:
+ compatible:
+ const: adafruit,seesaw_gamepad
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ seesaw_gamepad@50 {
+ compatible = "adafruit,seesaw_gamepad";
+ reg = <0x50>;
+ };
--
2.42.0
