On 3.10.2023 19:54, Komal Bajaj wrote: > Add qcm6490 devicetree file for QCM6490 SoC and QCM6490 IDP > platform. QCM6490 is derived from SC7280 meant for various > form factor including IoT. > > Supported features are, as of now: > * Debug UART > * eMMC > * USB > > Signed-off-by: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 333 +++++++++++++++++++++++ > arch/arm64/boot/dts/qcom/qcm6490.dtsi | 94 +++++++ > 3 files changed, 428 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/qcm6490-idp.dts > create mode 100644 arch/arm64/boot/dts/qcom/qcm6490.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 73c3be0f8872..3a2d9dbaacce 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -82,6 +82,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcm6490-fairphone-fp5.dtb > +dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb > dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb > diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > new file mode 100644 > index 000000000000..d81a7810fd5a > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > @@ -0,0 +1,333 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > +#include "pm7325.dtsi" > +#include "pm8350c.dtsi" > +#include "pmk8350.dtsi" > +#include "qcm6490.dtsi" As the kernel robot pointed out, this has clearly not even been compile-tested.. Konrad
