The sc8280xp provides a standard Camera Control Interface and Camera SubSystem hardware interface similar to antecedent parts sdm845 and sm8250. Per the target segments for this part, sc8280xp has more of everything. More CCI, VFE, CSIPHY and therefore more interrupt lines and clocks to declare. CCI x 4 CSIPHY x 4 VFE x 4 VFE Lite x 4 CSID x 4 Bootable 6.5.y x13s: https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/lenovo-x13s-linux-6.5.y Linux next: https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/linux-next-23-10-06-sc8280xp-camss This patch depends-on: https://lore.kernel.org/lkml/20231004161853.86382-2-bryan.odonoghue@xxxxxxxxxx/T/ Bryan O'Donoghue (5): dt-bindings: i2c: qcom-cci: Document sc8280xp compatible i2c: qcom-cci: Add sc8280xp compatible arm64: dts: qcom: sc8280xp: camss: Add CCI definitions media: dt-bindings: media: camss: Add qcom,sc8280xp-camss binding arm64: dts: qcom: sc8280xp: camss: Add CAMSS block definition .../devicetree/bindings/i2c/qcom,i2c-cci.yaml | 2 + .../bindings/media/qcom,sc8280xp-camss.yaml | 598 +++++++++++++++++ arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 608 ++++++++++++++++++ drivers/i2c/busses/i2c-qcom-cci.c | 1 + 4 files changed, 1209 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml -- 2.40.1