A1 SoC family has four i2c masters: i2c0 (I2CM_A), i2c1 (I2CM_B), i2c2 (I2CM_C) and i2c3 (I2CM_D). Signed-off-by: George Stark <gnstark@xxxxxxxxxxxxxxxxx> Signed-off-by: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx> --- arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 144 ++++++++++++++++++++++ 1 file changed, 144 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi index 823714bcb7a0..f53000a5d0cc 100644 --- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi @@ -126,6 +126,106 @@ gpio: bank@400 { gpio-ranges = <&periphs_pinctrl 0 0 62>; }; + i2c0_f11_pins: i2c0-f11 { + mux { + groups = "i2c0_sck_f11", + "i2c0_sda_f12"; + function = "i2c0"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_f9_pins: i2c0-f9 { + mux { + groups = "i2c0_sck_f9", + "i2c0_sda_f10"; + function = "i2c0"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_x_pins: i2c1-x { + mux { + groups = "i2c1_sck_x", + "i2c1_sda_x"; + function = "i2c1"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_a_pins: i2c1-a { + mux { + groups = "i2c1_sck_a", + "i2c1_sda_a"; + function = "i2c1"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_x0_pins: i2c2-x0 { + mux { + groups = "i2c2_sck_x0", + "i2c2_sda_x1"; + function = "i2c2"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_x15_pins: i2c2-x15 { + mux { + groups = "i2c2_sck_x15", + "i2c2_sda_x16"; + function = "i2c2"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_a4_pins: i2c2-a4 { + mux { + groups = "i2c2_sck_a4", + "i2c2_sda_a5"; + function = "i2c2"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_a8_pins: i2c2-a8 { + mux { + groups = "i2c2_sck_a8", + "i2c2_sda_a9"; + function = "i2c2"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_x_pins: i2c3-x { + mux { + groups = "i2c3_sck_x", + "i2c3_sda_x"; + function = "i2c3"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_f_pins: i2c3-f { + mux { + groups = "i2c3_sck_f", + "i2c3_sda_f"; + function = "i2c3"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + uart_a_pins: uart-a { mux { groups = "uart_a_tx", @@ -377,6 +477,17 @@ clkc_periphs: clock-controller@800 { "hifi_pll", "xtal"; }; + i2c0: i2c@1400 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1400 0x0 0x20>; + interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_I2C_M_A>; + power-domains = <&pwrc PWRC_I2C_ID>; + }; + uart_AO: serial@1c00 { compatible = "amlogic,meson-a1-uart", "amlogic,meson-ao-uart"; @@ -437,6 +548,39 @@ saradc: adc@2c00 { status = "disabled"; }; + i2c1: i2c@5c00 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x5c00 0x0 0x20>; + interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_I2C_M_B>; + power-domains = <&pwrc PWRC_I2C_ID>; + }; + + i2c2: i2c@6800 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x6800 0x0 0x20>; + interrupts = <GIC_SPI 76 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_I2C_M_C>; + power-domains = <&pwrc PWRC_I2C_ID>; + }; + + i2c3: i2c@6c00 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x6c00 0x0 0x20>; + interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_I2C_M_D>; + power-domains = <&pwrc PWRC_I2C_ID>; + }; + usb2_phy1: phy@4000 { compatible = "amlogic,a1-usb2-phy"; clocks = <&clkc_periphs CLKID_USB_PHY_IN>; -- 2.36.0