Re: [PATCH v23 12/16] PCI: add T_PVPERL macro

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 26, 2023 at 09:24:27PM +0900, Yoshihiro Shimoda wrote:
> According to the PCI Express Card Electromechanical Specification,
> Power stable to PERST# inactive interval is 100 ms as minimum.
> So, add the macro to use PCIe controller drivers.
> 
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> Reviewed-by: Serge Semin <fancer.lancer@xxxxxxxxx>

Beautiful, thank you!

No need to repost; whoever applies this, please:

  - s/add/Add/ in subject
  - Add sec 2.9.2 to spec citation in commit log and comment (can use
    "PCIe CEM r5.0, sec 2.9.2" for brevity)

> ---
>  drivers/pci/pci.h | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index 39a8932dc340..5ecbcf041179 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -13,6 +13,9 @@
>  
>  #define PCIE_LINK_RETRAIN_TIMEOUT_MS	1000
>  
> +/* Power stable to PERST# inactive from PCIe card Electromechanical Spec */
> +#define PCIE_T_PVPERL_MS		100
> +
>  /*
>   * PCIe r6.0, sec 5.3.3.2.1 <PME Synchronization>
>   * Recommends 1ms to 10ms timeout to check L2 ready.
> -- 
> 2.25.1
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux