[PATCH v23 12/16] PCI: add T_PVPERL macro

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



According to the PCI Express Card Electromechanical Specification,
Power stable to PERST# inactive interval is 100 ms as minimum.
So, add the macro to use PCIe controller drivers.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
Reviewed-by: Serge Semin <fancer.lancer@xxxxxxxxx>
---
 drivers/pci/pci.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 39a8932dc340..5ecbcf041179 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -13,6 +13,9 @@
 
 #define PCIE_LINK_RETRAIN_TIMEOUT_MS	1000
 
+/* Power stable to PERST# inactive from PCIe card Electromechanical Spec */
+#define PCIE_T_PVPERL_MS		100
+
 /*
  * PCIe r6.0, sec 5.3.3.2.1 <PME Synchronization>
  * Recommends 1ms to 10ms timeout to check L2 ready.
-- 
2.25.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux