On 01/02/2015 03:45 PM, Rob Herring wrote:
On Fri, Jan 2, 2015 at 11:20 AM, Murali Karicheri<m-karicheri2@xxxxxx> wrote:
Rob,
See my response below. Arnd and Will, please review this as well.
On 12/26/2014 02:33 PM, Rob Herring wrote:
On Wed, Dec 24, 2014 at 4:11 PM, Murali Karicheri<m-karicheri2@xxxxxx>
wrote:
Add of_pci_dma_configure() to allow updating the dma configuration
of the pci device using the configuration from DT of the parent of
the root bridge device.
Signed-off-by: Murali Karicheri<m-karicheri2@xxxxxx>
---
drivers/of/of_pci.c | 73
++++++++++++++++++++++++++++++++++++++++++++++++
include/linux/of_pci.h | 12 ++++++++
2 files changed, 85 insertions(+)
[...]
+ coherent = of_dma_is_coherent(parent_np);
+ dev_dbg(dev, "device is%sdma coherent\n",
+ coherent ? " " : " not ");
+
+ arch_setup_dma_ops(dev, dma_addr, size, NULL, coherent);
This is the same code as of_dma_configure. The only difference I see
is which node ptr is passed to of_dma_get_range. You need to make that
a function param of of_dma_configure.
of_dma_configure also has iommu handling now. You will probably need
something similar for PCI in that you setup an iommu based on the root
bus DT properties.
Initially I had the same idea to re-use the existing function
of_dma_configure() for this. I wanted to defer this until we have an
agreement on the changes required for the subject functionality. My quick
review of the code suggestio this would require additional API changes as
below. I did a quick test of the changes and it works for Keystone, but need
to be reviewed by everyone as I touch the IOMMU functionality here and I
don't have a platform with IOMMU. Need test by someone to make sure I don't
break anything.
The IOMMU changes look trivial. We may want to address the comment in
of_iommu_configure about parent nodes. We should be sure these changes
work with how we would do searching parent nodes.
I have no experience with IOMMU and may not offer much help here as I
originally wrote above. Will Deacon has added this API and probably able
to offer some help in this discussion.
Will Deacon,
Any comment?
Looking at the iommu documentation and of_iommu.c, I get a feeling that
this API is not really used at present as there are no callers of
of_iommu_set_ops() and I assume this is a WIP. I believe the way it is
expected to work is to have the iommu driver of the master IOMMU devices
call of_iommu_set_ops(). The device node of this master IOMMU device is
specified as a phandle in the OF node of the device (various bus devices
such as platform, PCI etc). This allow to retrieve the iommu ops though
the of_iommu_configure() API and use it in arch_setup_dma_ops(). So my
gut feeling is that for PCI devices, as there are no DT node, the root
bus node may specify iommus phandle to IOMMU master OF nodes.
W.r.t your comment "We may want to address the comment in
of_iommu_configure about parent nodes. We should be sure these changes
work with how we would do searching parent nodes",
I believe, the parent node search itself should work the same way in the
case of PCI as with platform bus case. PCI's case, we are providing the
OF node of the root bus host bridge. Why should this be any different in
terms of search?
I see a potential issue with dma-ranges as described in the notes below.
As noted below the usage of dma-range for iommu is to be determined. For
keystone, the of_iommu_configure() always return false as we don't use
the iommu. But don't know if this has any consequences for other
platforms. Or I got your questions wrong. Any help here from others on
the list?
========================================================================
One possible extension to the above is to use an "iommus" property along
with a "dma-ranges" property in a bus device node (such as PCI host
bridges). This can be useful to describe how children on the bus relate
to the IOMMU if they are not explicitly listed in the device tree (e.g.
PCI devices). However, the requirements of that use-case haven't been
fully determined yet. Implementing this is therefore not recommended
without further discussion and extension of this binding.
=========================================================================
The code is
struct iommu_ops *of_iommu_configure(struct device *dev)
{
struct of_phandle_args iommu_spec;
struct device_node *np;
struct iommu_ops *ops = NULL;
int idx = 0;
/*
* We don't currently walk up the tree looking for
* a parent IOMMU. See the `Notes:' section of
* Documentation/devicetree/bindings/iommu/iommu.txt
*/
while (!of_parse_phandle_with_args(dev->of_node, "iommus",
"#iommu-cells", idx,
&iommu_spec)) {
np = iommu_spec.np;
ops = of_iommu_get_ops(np);
if (!ops || !ops->of_xlate || ops->of_xlate(dev, &iommu_spec))
goto err_put_node;
of_node_put(np);
idx++;
}
return ops;
err_put_node:
of_node_put(np);
return NULL;
}
that calls of_dma_configure() as
of_dma_configure(dev, dev->of_node). All existing calls converted to this
wrapper.
There's only a few callers of of_dma_configure, so I don't think this
is necessary. The only thing platform bus specific is who is calling
the function.
Ok.
Rob
--
Murali Karicheri
Linux Kernel, Texas Instruments
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
