Rob,
See my response below. Arnd and Will, please review this as well.
On 12/26/2014 02:33 PM, Rob Herring wrote:
On Wed, Dec 24, 2014 at 4:11 PM, Murali Karicheri<m-karicheri2@xxxxxx> wrote:
Add of_pci_dma_configure() to allow updating the dma configuration
of the pci device using the configuration from DT of the parent of
the root bridge device.
Signed-off-by: Murali Karicheri<m-karicheri2@xxxxxx>
---
drivers/of/of_pci.c | 73 ++++++++++++++++++++++++++++++++++++++++++++++++
include/linux/of_pci.h | 12 ++++++++
2 files changed, 85 insertions(+)
----------------------CUT--------------------------------------------
+ unsigned long offset;
+ bool coherent;
+ int ret;
+
+ parent_np = of_get_pci_root_bridge_parent(pci_dev);
+
+ if (parent_np) {
Save a level of indentation and do:
if (!parent_np)
return;
Agree. This will not be needed if I go with changes proposed by your
next comment below.
+ /*
-------CUT------------------------------------------------------
+
+ coherent = of_dma_is_coherent(parent_np);
+ dev_dbg(dev, "device is%sdma coherent\n",
+ coherent ? " " : " not ");
+
+ arch_setup_dma_ops(dev, dma_addr, size, NULL, coherent);
This is the same code as of_dma_configure. The only difference I see
is which node ptr is passed to of_dma_get_range. You need to make that
a function param of of_dma_configure.
of_dma_configure also has iommu handling now. You will probably need
something similar for PCI in that you setup an iommu based on the root
bus DT properties.
Initially I had the same idea to re-use the existing function
of_dma_configure() for this. I wanted to defer this until we have an
agreement on the changes required for the subject functionality. My
quick review of the code suggestio this would require additional API
changes as below. I did a quick test of the changes and it works for
Keystone, but need to be reviewed by everyone as I touch the IOMMU
functionality here and I don't have a platform with IOMMU. Need test by
someone to make sure I don't break anything.
Here are the changes required to implement this suggestion.
1. Move the of_dma_configure() to drivers/of/device.c (include the API
in of_device.h) and make it global (using proper EXPORT macro).
Otherwise, we will have to include of_platform.h in drivers/of/of_pci.c
assuming the prototype is defined in of_platform.h which doesn't look
appropriate to me. Would require following additional include files in
drivers/of/device.c as well.
+#include <linux/of_address.h>
+#include <linux/of_iommu.h>
+#include <linux/dma-mapping.h>
2. drivers/iommu/of_iommu.c. This is needed so that of_iommu_configure()
can take confuguration from the root bus DT as you have suggested.
-struct iommu_ops *of_iommu_configure(struct device *dev)
+struct iommu_ops *of_iommu_configure(struct device *dev, struct
device_node *node)
{
struct of_phandle_args iommu_spec;
struct device_node *np;
@@ -145,7 +145,7 @@ struct iommu_ops *of_iommu_configure(struct device *dev)
* See the `Notes:' section of
* Documentation/devicetree/bindings/iommu/iommu.txt
*/
- while (!of_parse_phandle_with_args(dev->of_node, "iommus",
+ while (!of_parse_phandle_with_args(node, "iommus",
"#iommu-cells", idx,
&iommu_spec)) {
3. drivers/of/of_pci.c. The existing function (added in this patch) will
make call to of_dma_configure() as
parent_np = of_get_pci_root_bridge_parent(pci_dev);
of_dma_configure(dev, parent_np);
4. drivers/of/platform.c. Add a wrapper function
of_platform_dma_configure() that calls of_dma_configure() as
of_dma_configure(dev, dev->of_node). All existing calls converted to
this wrapper.
If the above looks good, I can post v3 of the patch with these changes.
Rob
--
Murali Karicheri
Linux Kernel, Texas Instruments
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
