Re: [PATCH 2/8] phy: qcom: Introduce Super-Speed USB UNIPHY driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 10/3/2023 8:24 PM, Dmitry Baryshkov wrote:
On Tue, 3 Oct 2023 at 17:22, Praveenkumar I <quic_ipkumar@xxxxxxxxxxx> wrote:


On 9/30/2023 10:48 PM, Dmitry Baryshkov wrote:
On 29/09/2023 11:42, Praveenkumar I wrote:
Adds Qualcomm 22ull Super-Speed USB UNIPHY driver support which
is present in Qualcomm IPQ5332 SoC. This PHY is interfaced with
SNPS DWC3 USB and SNPS DWC PCIe. Either one of the interface
can use the it and selection is done via mux present in TCSR
register. This driver selects the PHY for DWC3 USB and handles
the reset, clocks and regulator.

Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
---
   drivers/phy/qualcomm/Kconfig               |  11 +
   drivers/phy/qualcomm/Makefile              |   1 +
   drivers/phy/qualcomm/phy-qcom-uniphy-usb.c | 322 +++++++++++++++++++++
   3 files changed, 334 insertions(+)
   create mode 100644 drivers/phy/qualcomm/phy-qcom-uniphy-usb.c

diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
index d891058b7c39..7257c8455c53 100644
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
@@ -154,6 +154,17 @@ config PHY_QCOM_M31_USB
         management. This driver is required even for peripheral only or
         host only mode configurations.
   +config PHY_QCOM_UNIPHY_USB
+    tristate "Qualcomm USB Super-Speed UNIPHY driver"
Can we please have more specific driver name? As I wrote earlier,
there are two other (different) kinds of Qualcomm UNI PHY devices:
- DSI / HDMI UNIPHY on apq8064 / msm8974 / msm8960 (?)
- USB QMP UNI PHY drivers

Adding a driver called UNIPHY, which is not related to those two kinds
sounds pretty confusing to me.
This UNIPHY is different from above mentioned ones. This a custom
version for 22nm on Qualcomm IPQ5332.
Can we name the driver as phy-qcom-uniphy-usb-ss-22ull.c /
phy-qcom-usb-ss-22ull.c ?
usb-ss-22ull sounds better. Or maybe usb-ipq-ss
Sure, will rename it to phy-qcom-usb-ss-22ull.c

+    depends on USB && (ARCH_QCOM || COMPILE_TEST)
+    select GENERIC_PHY
+    help
+      Enable this to support the Qualcomm USB Super-Speed UNIPHY
transceiver
+      with DWC3 USB core. It handles PHY initialization, clock
+      management required after resetting the hardware and power
+      management. This driver is required even for peripheral only or
+      host only mode configurations.
+
   config PHY_QCOM_USB_HS
       tristate "Qualcomm USB HS PHY module"
       depends on USB_ULPI_BUS
diff --git a/drivers/phy/qualcomm/Makefile
b/drivers/phy/qualcomm/Makefile
index ffd609ac6233..c3e0112a7a70 100644
--- a/drivers/phy/qualcomm/Makefile
+++ b/drivers/phy/qualcomm/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_PHY_QCOM_QMP_USB_LEGACY)    +=
phy-qcom-qmp-usb-legacy.o
   obj-$(CONFIG_PHY_QCOM_QUSB2)        += phy-qcom-qusb2.o
   obj-$(CONFIG_PHY_QCOM_SNPS_EUSB2)    += phy-qcom-snps-eusb2.o
   obj-$(CONFIG_PHY_QCOM_EUSB2_REPEATER)    += phy-qcom-eusb2-repeater.o
+obj-$(CONFIG_PHY_QCOM_UNIPHY_USB)    += phy-qcom-uniphy-usb.o
   obj-$(CONFIG_PHY_QCOM_USB_HS)         += phy-qcom-usb-hs.o
   obj-$(CONFIG_PHY_QCOM_USB_HSIC)     += phy-qcom-usb-hsic.o
   obj-$(CONFIG_PHY_QCOM_USB_HS_28NM)    += phy-qcom-usb-hs-28nm.o
diff --git a/drivers/phy/qualcomm/phy-qcom-uniphy-usb.c
b/drivers/phy/qualcomm/phy-qcom-uniphy-usb.c
new file mode 100644
index 000000000000..fdfc9c225995
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-uniphy-usb.c
So, is it a USB PHY or UNI PHY (where I would expect that it handles
USB and PCIe?)
It is a USB PHY and the PHY name is UNIPHY. Added the usb in the file
name to differentiate it.
--
Thanks,
Praveenkumar




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux