[PATCH v4 2/6] PM / devfreq: Switch to dev_pm_opp_find_freq_{ceil/floor}_indexed() APIs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some devfreq consumers like UFS driver need to work with multiple clocks
through the OPP framework. For this reason, OPP framework exposes the
_indexed() APIs for finding the floor/ceil of the supplied frequency of
the indexed clock. So let's use them in the devfreq driver.

Currently, the clock index of 0 is used which works fine for multiple as
well as single clock.

Acked-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 drivers/devfreq/devfreq.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index 474d81831ad3..b3a68d5833bd 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -88,7 +88,7 @@ static unsigned long find_available_min_freq(struct devfreq *devfreq)
 	struct dev_pm_opp *opp;
 	unsigned long min_freq = 0;
 
-	opp = dev_pm_opp_find_freq_ceil(devfreq->dev.parent, &min_freq);
+	opp = dev_pm_opp_find_freq_ceil_indexed(devfreq->dev.parent, &min_freq, 0);
 	if (IS_ERR(opp))
 		min_freq = 0;
 	else
@@ -102,7 +102,7 @@ static unsigned long find_available_max_freq(struct devfreq *devfreq)
 	struct dev_pm_opp *opp;
 	unsigned long max_freq = ULONG_MAX;
 
-	opp = dev_pm_opp_find_freq_floor(devfreq->dev.parent, &max_freq);
+	opp = dev_pm_opp_find_freq_floor_indexed(devfreq->dev.parent, &max_freq, 0);
 	if (IS_ERR(opp))
 		max_freq = 0;
 	else
@@ -196,7 +196,7 @@ static int set_freq_table(struct devfreq *devfreq)
 		return -ENOMEM;
 
 	for (i = 0, freq = 0; i < devfreq->max_state; i++, freq++) {
-		opp = dev_pm_opp_find_freq_ceil(devfreq->dev.parent, &freq);
+		opp = dev_pm_opp_find_freq_ceil_indexed(devfreq->dev.parent, &freq, 0);
 		if (IS_ERR(opp)) {
 			devm_kfree(devfreq->dev.parent, devfreq->freq_table);
 			return PTR_ERR(opp);
@@ -2036,18 +2036,18 @@ struct dev_pm_opp *devfreq_recommended_opp(struct device *dev,
 
 	if (flags & DEVFREQ_FLAG_LEAST_UPPER_BOUND) {
 		/* The freq is an upper bound. opp should be lower */
-		opp = dev_pm_opp_find_freq_floor(dev, freq);
+		opp = dev_pm_opp_find_freq_floor_indexed(dev, freq, 0);
 
 		/* If not available, use the closest opp */
 		if (opp == ERR_PTR(-ERANGE))
-			opp = dev_pm_opp_find_freq_ceil(dev, freq);
+			opp = dev_pm_opp_find_freq_ceil_indexed(dev, freq, 0);
 	} else {
 		/* The freq is an lower bound. opp should be higher */
-		opp = dev_pm_opp_find_freq_ceil(dev, freq);
+		opp = dev_pm_opp_find_freq_ceil_indexed(dev, freq, 0);
 
 		/* If not available, use the closest opp */
 		if (opp == ERR_PTR(-ERANGE))
-			opp = dev_pm_opp_find_freq_floor(dev, freq);
+			opp = dev_pm_opp_find_freq_floor_indexed(dev, freq, 0);
 	}
 
 	return opp;
-- 
2.25.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux