Hi Mathieu,
Thanks for the reviews. Please find my comments below.
On 10/2/23 10:55 AM, Mathieu Poirier wrote:
> On Thu, Sep 28, 2023 at 08:58:58AM -0700, Tanmay Shah wrote:
> > Add properties as per new bindings in zynqmp remoteproc node
> > to represent TCM address and size. This patch configures
> > RPU in split mode and adds TCM information accordingly.
> >
>
> Why is this changed from lockstep to split mode? What about all the people out
> there that are expecting a lockstep mode?
I agree, this should have been in split mode in the first place as we would like to demonstrate use of both
RPUs with two separate demo firmwares which is the best use of the
hardware and the most preferred use of zynqmp platform by people. That motivates to change
this to split mode.
Now changing this may not be problem for lot of people with following reasons.
The firmwares that are only using first 64KB of TCM memory, they can easily run in split mode as well.
Also rpmsg vring information isn't available in device-tree yet, so I am hoping that firmware that
are using upstream device-tree are not that big yet.
If we change this to split mode before introducing rpmsg related nodes, I bet it will affect very less number of people.
For lockstep mode the example is available in dt-bindings document.
So, if people need lockstep mode for any reason, all they need to change is xlnx,cluster-mode property from 0 to 1 and TCM nodes
from bindings document.
If you think it's crucial to mention all above, I can send new patch with all above info in commit message.
>
> > Signed-off-by: Tanmay Shah <tanmay.shah@xxxxxxx>
> > ---
> > arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 28 ++++++++++++++++++++------
> > 1 file changed, 22 insertions(+), 6 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> > index b61fc99cd911..01e12894c88e 100644
> > --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> > +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> > @@ -247,19 +247,35 @@ fpga_full: fpga-full {
> > ranges;
> > };
> >
> > - remoteproc {
> > + remoteproc@ffe00000 {
> > compatible = "xlnx,zynqmp-r5fss";
> > - xlnx,cluster-mode = <1>;
> > + xlnx,cluster-mode = <0>;
> >
> > - r5f-0 {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
> > + <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
> > + <0x1 0x0 0x0 0xffe90000 0x0 0x10000>,
> > + <0x1 0x20000 0x0 0xffeb0000 0x0 0x10000>;
> > +
> > + r5f@0 {
> > compatible = "xlnx,zynqmp-r5f";
> > - power-domains = <&zynqmp_firmware PD_RPU_0>;
> > + reg = <0x0 0x0 0x0 0x10000>, <0x0 0x20000 0x0 0x10000>;
> > + reg-names = "atcm", "btcm";
> > + power-domains = <&zynqmp_firmware PD_RPU_0>,
> > + <&zynqmp_firmware PD_R5_0_ATCM>,
> > + <&zynqmp_firmware PD_R5_0_BTCM>;
> > memory-region = <&rproc_0_fw_image>;
> > };
> >
> > - r5f-1 {
> > + r5f@1 {
> > compatible = "xlnx,zynqmp-r5f";
> > - power-domains = <&zynqmp_firmware PD_RPU_1>;
> > + reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
> > + reg-names = "atcm", "btcm";
> > + power-domains = <&zynqmp_firmware PD_RPU_1>,
> > + <&zynqmp_firmware PD_R5_1_ATCM>,
> > + <&zynqmp_firmware PD_R5_1_BTCM>;
> > memory-region = <&rproc_1_fw_image>;
> > };
> > };
> > --
> > 2.25.1
> >
