Add properties as per new bindings in zynqmp remoteproc node
to represent TCM address and size. This patch configures
RPU in split mode and adds TCM information accordingly.
Signed-off-by: Tanmay Shah <tanmay.shah@xxxxxxx>
---
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 28 ++++++++++++++++++++------
1 file changed, 22 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index b61fc99cd911..01e12894c88e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -247,19 +247,35 @@ fpga_full: fpga-full {
ranges;
};
- remoteproc {
+ remoteproc@ffe00000 {
compatible = "xlnx,zynqmp-r5fss";
- xlnx,cluster-mode = <1>;
+ xlnx,cluster-mode = <0>;
- r5f-0 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
+ <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
+ <0x1 0x0 0x0 0xffe90000 0x0 0x10000>,
+ <0x1 0x20000 0x0 0xffeb0000 0x0 0x10000>;
+
+ r5f@0 {
compatible = "xlnx,zynqmp-r5f";
- power-domains = <&zynqmp_firmware PD_RPU_0>;
+ reg = <0x0 0x0 0x0 0x10000>, <0x0 0x20000 0x0 0x10000>;
+ reg-names = "atcm", "btcm";
+ power-domains = <&zynqmp_firmware PD_RPU_0>,
+ <&zynqmp_firmware PD_R5_0_ATCM>,
+ <&zynqmp_firmware PD_R5_0_BTCM>;
memory-region = <&rproc_0_fw_image>;
};
- r5f-1 {
+ r5f@1 {
compatible = "xlnx,zynqmp-r5f";
- power-domains = <&zynqmp_firmware PD_RPU_1>;
+ reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
+ reg-names = "atcm", "btcm";
+ power-domains = <&zynqmp_firmware PD_RPU_1>,
+ <&zynqmp_firmware PD_R5_1_ATCM>,
+ <&zynqmp_firmware PD_R5_1_BTCM>;
memory-region = <&rproc_1_fw_image>;
};
};
--
2.25.1
