On 29/09/2023 15:18, Konrad Dybcio wrote:
On 29.09.2023 16:15, Bryan O'Donoghue wrote:
On 29/09/2023 14:35, Konrad Dybcio wrote:
On 9/29/23 10:01, Luca Weiss wrote:
Add the CCI busses found on sc7280 and their pinctrl states.
Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 136 +++++++++++++++++++++++++++++++++++
1 file changed, 136 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 66f1eb83cca7..65550de2e4ff 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3793,6 +3793,86 @@ videocc: clock-controller@aaf0000 {
#power-domain-cells = <1>;
};
+ cci0: cci@ac4a000 {
+ compatible = "qcom,sc7280-cci", "qcom,msm8996-cci";
+ reg = <0 0x0ac4a000 0 0x1000>;
+ interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_0_CLK>,
+ <&camcc CAM_CC_CCI_0_CLK_SRC>;
+ clock-names = "camnoc_axi",
+ "slow_ahb_src",
+ "cpas_ahb",
+ "cci",
+ "cci_src";
I guess this is more of a question to e.g. Bryan, but are all of these clocks actually necessary?
Konrad
Hmm its a good question, we generally take the approach of adopting all of the downstream clocks for these camera interfaces verbatim.
The clock plan for this part only calls out cci_X_clk and cci_x_clk_src for the CCI however we know that to be incomplete since we *absolutely* need to have the AXI for the block clocked to access those registers, same deal with the AHB bus.
AXI: registers
AHB: data
In the above list the only clock you might conceivably not need is CPAS_AHB_CLK.
Let me zap that clock from sdm845 since I have an rb3 right in front of me and see what happens.
Crash and reset
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4402,13 +4402,11 @@ cci: cci@ac4a000 {
clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
<&clock_camcc CAM_CC_SOC_AHB_CLK>,
<&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
- <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
<&clock_camcc CAM_CC_CCI_CLK>,
<&clock_camcc CAM_CC_CCI_CLK_SRC>;
clock-names = "camnoc_axi",
"soc_ahb",
"slow_ahb_src",
- "cpas_ahb",
"cci",
"cci_src";
I think the list is good tbh
WDYT about camcc consuming ahb, like dispcc does?
AXI, hmm.. not quite sure what to do with it
Konrad
Hmm on which platform, camcc clock depds on sdm845 looks very sparse to me.
8550 OTOH
dispcc: clock-controller@af00000 {
compatible = "qcom,sm8550-dispcc";
reg = <0 0x0af00000 0 0x20000>;
clocks = <&bi_tcxo_div2>,
<&bi_tcxo_ao_div2>,
<&gcc GCC_DISP_AHB_CLK>,
videocc: clock-controller@aaf0000 {
compatible = "qcom,sm8550-videocc";
reg = <0 0x0aaf0000 0 0x10000>;
clocks = <&bi_tcxo_div2>,
<&gcc GCC_VIDEO_AHB_CLK>;
sm8250
camcc: clock-controller@ad00000 {
compatible = "qcom,sm8250-camcc";
reg = <0 0x0ad00000 0 0x10000>;
clocks = <&gcc GCC_CAMERA_AHB_CLK>,
I think those DISP_AHB, VIDEO_AHB_CLK, CAMERA_AHB_CLKs should live in
the display, video and camss blocks i.e. they are not clocks that you
require to access the clock controller registers themselves...
I'm seeing for the most part these MEDIAIPBLOCK_AHB_CLKs don't come from
the GCC AHB clock but from another root clock generator.
bi_tcxo ->
cam_cc_pll0_out_main ->
cam_cc_pll0_out_even ->
cam_cc_pll0_out_odd ->
cam_cc_pll2_out_main ->
cam_cc_slow_ahb_clk_src ->
camcc_bps_ahb_clk
camcc_ipe_0_ahb_clk
...
camcc_core_ahb_clk
Lets see what happens to sm8250 if we remove CAMERA_AHB_CLK from the
camera clock controller @ camcc: clock-controller@ad00000 {} I don't
believe that is required.
...
Yep.. does SFA
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi
b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 1efa07f2caff4..1e7d9ee25eeae 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -4172,11 +4172,10 @@ port@5 {
camcc: clock-controller@ad00000 {
compatible = "qcom,sm8250-camcc";
reg = <0 0x0ad00000 0 0x10000>;
- clocks = <&gcc GCC_CAMERA_AHB_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>,
<&sleep_clk>;
- clock-names = "iface", "bi_tcxo", "bi_tcxo_ao",
"sleep_clk";
+ clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
power-domains = <&rpmhpd SM8250_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
status = "disabled";
Not actually a required clock for the clock controller.
I suspect the same is true for dispcc and videocc though it would also
mean the respective drivers would need to switch on <&gcc
DISPx_CAMERA_AHB_CLK> or <&gcc GCC_VIDEO_AHB_CLK> prior to accessing
registers inside the ip blocks which may not currently be the case.
Feels like a bit of a contrary answer but my reading is the
GCC_IPBLOCK_AHB_CLK clocks belong in the drivers not the clock
controllers.. or at least that's true for sm8250/camcc
ymmv
---
bod
