Add the CCI busses found on sc7280 and their pinctrl states. Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 136 +++++++++++++++++++++++++++++++++++ 1 file changed, 136 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 66f1eb83cca7..65550de2e4ff 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -3793,6 +3793,86 @@ videocc: clock-controller@aaf0000 { #power-domain-cells = <1>; }; + cci0: cci@ac4a000 { + compatible = "qcom,sc7280-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac4a000 0 0x1000>; + interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_0_CLK>, + <&camcc CAM_CC_CCI_0_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + pinctrl-0 = <&cci0_default &cci1_default>; + pinctrl-1 = <&cci0_sleep &cci1_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci0_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci0_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci1: cci@ac4b000 { + compatible = "qcom,sc7280-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac4b000 0 0x1000>; + interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_1_CLK>, + <&camcc CAM_CC_CCI_1_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + pinctrl-0 = <&cci2_default &cci3_default>; + pinctrl-1 = <&cci2_sleep &cci3_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci1_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci1_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + camcc: clock-controller@ad00000 { compatible = "qcom,sc7280-camcc"; reg = <0 0x0ad00000 0 0x10000>; @@ -4298,6 +4378,62 @@ tlmm: pinctrl@f100000 { gpio-ranges = <&tlmm 0 0 175>; wakeup-parent = <&pdc>; + cci0_default: cci0-default-state { + pins = "gpio69", "gpio70"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci0_sleep: cci0-sleep-state { + pins = "gpio69", "gpio70"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci1_default: cci1-default-state { + pins = "gpio71", "gpio72"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci1_sleep: cci1-sleep-state { + pins = "gpio71", "gpio72"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci2_default: cci2-default-state { + pins = "gpio73", "gpio74"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci2_sleep: cci2-sleep-state { + pins = "gpio73", "gpio74"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci3_default: cci3-default-state { + pins = "gpio75", "gpio76"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci3_sleep: cci3-sleep-state { + pins = "gpio75", "gpio76"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + dp_hot_plug_det: dp-hot-plug-det-state { pins = "gpio47"; function = "dp_hot"; -- 2.42.0