Enable the CCI busses where sensors are connected to. Not covered here is the regulator used for pull-up on the I2C busses. This would be pm8008_l6 (L6P). Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts index c8e7e6689b20..3fc0b3f7dc31 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts @@ -388,6 +388,26 @@ vreg_bob: bob { }; }; +&cci0 { + status = "okay"; +}; + +&cci0_i2c0 { + /* IMX800 @ 1a */ +}; + +&cci0_i2c1 { + /* IMX858 @ 29 */ +}; + +&cci1 { + status = "okay"; +}; + +&cci1_i2c1 { + /* S5KJN1SQ03 @ 10 */ +}; + &dispcc { /* Disable for now so simple-framebuffer continues working */ status = "disabled"; -- 2.42.0