From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
Add documentation for pin controller found on RZ/G3S (R9A08G045) SoC.
Compared with RZ/G2{L,UL} RZ/G3S has 82 general-purpose IOs, no slew
rate and output impedance support and more values for drive strength
which needs to be expressed in microamp.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
---
Changes in v2:
- defined drive-strength-microamp as general and make if/then schema to
not allow specific properties depending on compatible
.../pinctrl/renesas,rzg2l-pinctrl.yaml | 20 +++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
index eb726770f571..86228ba69aab 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -25,6 +25,7 @@ properties:
- enum:
- renesas,r9a07g043-pinctrl # RZ/G2UL{Type-1,Type-2} and RZ/Five
- renesas,r9a07g044-pinctrl # RZ/G2{L,LC}
+ - renesas,r9a08g045-pinctrl # RZ/G3S
- items:
- enum:
@@ -78,6 +79,21 @@ additionalProperties:
- $ref: pincfg-node.yaml#
- $ref: pinmux-node.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,r9a08g045-pinctrl
+ then:
+ properties:
+ drive-strength: false
+ output-impedance-ohms: false
+ slew-rate: false
+ else:
+ properties:
+ drive-strength-microamp: false
+
description:
Pin controller client devices use pin configuration subnodes (children
and grandchildren) for desired pin configuration.
@@ -92,6 +108,10 @@ additionalProperties:
pins: true
drive-strength:
enum: [ 2, 4, 8, 12 ]
+ drive-strength-microamp:
+ enum: [ 1900, 2200, 4000, 4400, 4500, 4700, 5200, 5300, 5700,
+ 5800, 6000, 6050, 6100, 6550, 6800, 7000, 8000, 9000,
+ 10000 ]
output-impedance-ohms:
enum: [ 33, 50, 66, 100 ]
power-source:
--
2.39.2
