Add the ADSP clock support to the R-Car generation 2 CPG driver. This clock
gets derived from PLL1. The layout of the ADSPCKCR register is similar to
those of the clocks supported by the 'clk-div6' driver but the divider encoding
is non-linear, so can't be supported by that driver...
Based on the original patch by Konstantin Kozhevnikov
<konstantin.kozhevnikov@xxxxxxxxxxxxxxxxxx>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
---
The patch is against the 'clk-next' branch of Mike Turquette's 'linux.git' repo
plus the RCAN clock support patch posted last week.
Changes in version 2:
- swapped "adsp" and "rcan" in the binding document.
Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt | 5 -
drivers/clk/shmobile/clk-rcar-gen2.c | 48 ++++++++++
2 files changed, 51 insertions(+), 2 deletions(-)
Index: linux/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
===================================================================
--- linux.orig/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
+++ linux/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
@@ -16,7 +16,8 @@ Required Properties:
- clocks: Reference to the parent clock
- #clock-cells: Must be 1
- clock-output-names: The names of the clocks. Supported clocks are "main",
- "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", and "rcan"
+ "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", "rcan", and
+ "adsp"
Example
@@ -30,5 +31,5 @@ Example
#clock-cells = <1>;
clock-output-names = "main", "pll0, "pll1", "pll3",
"lb", "qspi", "sdh", "sd0", "sd1", "z",
- "rcan";
+ "rcan", "adsp";
};
Index: linux/drivers/clk/shmobile/clk-rcar-gen2.c
===================================================================
--- linux.orig/drivers/clk/shmobile/clk-rcar-gen2.c
+++ linux/drivers/clk/shmobile/clk-rcar-gen2.c
@@ -33,6 +33,7 @@ struct rcar_gen2_cpg {
#define CPG_FRQCRC 0x000000e0
#define CPG_FRQCRC_ZFC_MASK (0x1f << 8)
#define CPG_FRQCRC_ZFC_SHIFT 8
+#define CPG_ADSPCKCR 0x0000025c
#define CPG_RCANCKCR 0x00000270
/* -----------------------------------------------------------------------------
@@ -162,6 +163,51 @@ static struct clk * __init cpg_z_clk_reg
return clk;
}
+/* ADSP divisors */
+static const struct clk_div_table cpg_adsp_div_table[] = {
+ { 1, 3 }, { 2, 4 }, { 3, 6 }, { 4, 8 },
+ { 5, 12 }, { 6, 16 }, { 7, 18 }, { 8, 24 },
+ { 10, 36 }, { 11, 48 }, { 0, 0 },
+};
+
+static struct clk * __init cpg_adsp_clk_register(struct rcar_gen2_cpg *cpg)
+{
+ const char *parent_name = "pll1";
+ struct clk_divider *div;
+ struct clk_gate *gate;
+ struct clk *clk;
+
+ div = kzalloc(sizeof(*div), GFP_KERNEL);
+ if (!div)
+ return ERR_PTR(-ENOMEM);
+
+ div->reg = cpg->reg + CPG_ADSPCKCR;
+ div->width = 4;
+ div->table = cpg_adsp_div_table;
+ div->lock = &cpg->lock;
+
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+ if (!gate) {
+ kfree(div);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ gate->reg = cpg->reg + CPG_RCANCKCR;
+ gate->bit_idx = 8;
+ gate->flags = CLK_GATE_SET_TO_DISABLE;
+ gate->lock = &cpg->lock;
+
+ clk = clk_register_composite(NULL, "adsp", &parent_name, 1, NULL, NULL,
+ &div->hw, &clk_divider_ops,
+ &gate->hw, &clk_gate_ops, 0);
+ if (IS_ERR(clk)) {
+ kfree(gate);
+ kfree(div);
+ }
+
+ return clk;
+}
+
static struct clk * __init cpg_rcan_clk_register(struct rcar_gen2_cpg *cpg,
struct device_node *np)
{
@@ -301,6 +347,8 @@ rcar_gen2_cpg_register_clock(struct devi
shift = 0;
} else if (!strcmp(name, "z")) {
return cpg_z_clk_register(cpg);
+ } else if (!strcmp(name, "adsp")) {
+ return cpg_adsp_clk_register(cpg);
} else if (!strcmp(name, "rcan")) {
return cpg_rcan_clk_register(cpg, np);
} else {
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
