On 26/09/2023 01:28, Yuji Ishikawa wrote: > Adds the Device Tree binding documentation that allows to describe > the Video Input Interface found in Toshiba Visconti SoCs. > > + reg: > + items: > + - description: Registers for capture control > + - description: Registers for CSI2 receiver control > + - description: Registers for bus interface unit control > + - description: Registers for Memory Protection Unit > + > + interrupts: > + items: > + - description: Sync Interrupt > + - description: Status (Error) Interrupt > + - description: CSI2 Receiver Interrupt > + - description: L1ISP Interrupt > + > + port: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: CSI-2 input port, with a single endpoint connected to the CSI-2 transmitter. > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + additionalProperties: false This is a friendly reminder during the review process. It seems my previous comments were not fully addressed. Maybe my feedback got lost between the quotes, maybe you just forgot to apply it. Please go back to the previous discussion and either implement all requested changes or keep discussing them. Thank you. > + > + required: > + - clock-noncontinuous > + - link-frequencies > + - remote-endpoint > + - data-lanes Not much improved here. required goes after properties, always. I pointed you last time the file which you should use as an example. > + > + properties: > + data-lanes: > + description: VIIF supports 1, 2, 3 or 4 data lanes > + minItems: 1 > + items: > + - const: 1 > + - const: 2 > + - const: 3 > + - const: 4 > + > + clock-noncontinuous: true Drop > + link-frequencies: true Drop > + remote-endpoint: true Drop Best regards, Krzysztof
