On Wed, Sep 27, 2023 at 01:48:56PM +0530, Nitin Rawat wrote:
> Add UFS host controller and PHY nodes for sc7280 soc.
>
> Signed-off-by: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 63 ++++++++++++++++++++++++++++
> 1 file changed, 63 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 66f1eb83cca7..0b50b8557311 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -3353,6 +3353,69 @@
> };
> };
>
> + ufs_mem_hc: ufs@1d84000 {
> + compatible = "qcom,sc7280-ufshc", "qcom,ufshc",
> + "jedec,ufs-2.0";
> + reg = <0x0 0x01d84000 0x0 0x3000>;
> + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> + phys = <&ufs_mem_phy>;
> + phy-names = "ufsphy";
> + lanes-per-direction = <2>;
> + #reset-cells = <1>;
> + resets = <&gcc GCC_UFS_PHY_BCR>;
> + reset-names = "rst";
> +
> + power-domains = <&gcc GCC_UFS_PHY_GDSC>;
> + required-opps = <&rpmhpd_opp_nom>;
> +
> + iommus = <&apps_smmu 0x80 0x0>;
> + dma-coherent;
> +
> + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
> + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> + <&gcc GCC_UFS_PHY_AHB_CLK>,
> + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
> + clock-names = "core_clk",
> + "bus_aggr_clk",
> + "iface_clk",
> + "core_clk_unipro",
> + "ref_clk",
> + "tx_lane0_sync_clk",
> + "rx_lane0_sync_clk",
> + "rx_lane1_sync_clk";
Please add the interconnect properties since mainline has the support.
- Mani
--
மணிவண்ணன் சதாசிவம்
