On 27/09/2023 04:33, Chancel Liu wrote:
> Add audio devices nodes including SAI, MICFIL, XCVR and MQS.
>
> Signed-off-by: Chancel Liu <chancel.liu@xxxxxxx>
> ---
> arch/arm64/boot/dts/freescale/imx93.dtsi | 87 ++++++++++++++++++++++++
> 1 file changed, 87 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
> index f20dd18e0b65..6ed7b156c633 100644
> --- a/arch/arm64/boot/dts/freescale/imx93.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
> @@ -366,6 +366,25 @@ flexcan1: can@443a0000 {
> status = "disabled";
> };
>
> + sai1: sai@443b0000 {
> + compatible = "fsl,imx93-sai";
> + reg = <0x443b0000 0x10000>;
> + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>,
> + <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
> + <&clk IMX93_CLK_DUMMY>;
> + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
> + dmas = <&edma1 22 0 1>, <&edma1 21 0 0>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
> +
> + mqs1: mqs {
Why do you have non-MMIO nodes in soc@? You introduce new warnings.
Please test your code (dtbs_check W=1)
Best regards,
Krzysztof
