Add audio devices nodes including SAI, MICFIL, XCVR and MQS.
Signed-off-by: Chancel Liu <chancel.liu@xxxxxxx>
---
arch/arm64/boot/dts/freescale/imx93.dtsi | 87 ++++++++++++++++++++++++
1 file changed, 87 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index f20dd18e0b65..6ed7b156c633 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -366,6 +366,25 @@ flexcan1: can@443a0000 {
status = "disabled";
};
+ sai1: sai@443b0000 {
+ compatible = "fsl,imx93-sai";
+ reg = <0x443b0000 0x10000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_DUMMY>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dmas = <&edma1 22 0 1>, <&edma1 21 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ mqs1: mqs {
+ compatible = "fsl,imx93-mqs";
+ gpr = <&anomix_ns_gpr>;
+ status = "disabled";
+ };
+
iomuxc: pinctrl@443c0000 {
compatible = "fsl,imx93-iomuxc";
reg = <0x443c0000 0x10000>;
@@ -446,6 +465,23 @@ tmu: tmu@44482000 {
#thermal-sensor-cells = <1>;
};
+ micfil: micfil@44520000 {
+ compatible = "fsl,imx93-micfil";
+ reg = <0x44520000 0x10000>;
+ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_PDM_IPG>,
+ <&clk IMX93_CLK_PDM_GATE>,
+ <&clk IMX93_CLK_AUDIO_PLL>,
+ <&clk IMX93_CLK_DUMMY>;
+ clock-names = "ipg_clk", "ipg_clk_app",
+ "pll8k", "clkext3";
+ dmas = <&edma1 29 0 5>;
+ dma-names = "rx";
+ status = "disabled";
+ };
adc1: adc@44530000 {
compatible = "nxp,imx93-adc";
@@ -736,6 +772,57 @@ flexspi1: spi@425e0000 {
status = "disabled";
};
+ sai2: sai@42650000 {
+ compatible = "fsl,imx93-sai";
+ reg = <0x42650000 0x10000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_SAI2_IPG>, <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_SAI2_GATE>, <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_DUMMY>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dmas = <&edma2 59 0 1>, <&edma2 58 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ sai3: sai@42660000 {
+ compatible = "fsl,imx93-sai";
+ reg = <0x42660000 0x10000>;
+ interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_SAI3_IPG>, <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_SAI3_GATE>, <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_DUMMY>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dmas = <&edma2 61 0 1>, <&edma2 60 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ mqs2: mqs {
+ compatible = "fsl,imx93-mqs";
+ gpr = <&wakeupmix_gpr>;
+ status = "disabled";
+ };
+
+ xcvr: xcvr@42680000 {
+ compatible = "fsl,imx93-xcvr";
+ reg = <0x42680000 0x800>,
+ <0x42680800 0x400>,
+ <0x42680c00 0x080>,
+ <0x42680e00 0x080>;
+ reg-names = "ram", "regs", "rxfifo", "txfifo";
+ interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+ <&clk IMX93_CLK_SPDIF_GATE>,
+ <&clk IMX93_CLK_DUMMY>,
+ <&clk IMX93_CLK_AUD_XCVR_GATE>;
+ clock-names = "ipg", "phy", "spba", "pll_ipg";
+ dmas = <&edma2 65 0 1>, <&edma2 66 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
lpuart7: serial@42690000 {
compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x42690000 0x1000>;
--
2.25.1
