On Tue, 26 Sep 2023 21:09:35 +0200, Lukas Wunner wrote: > A new reset driver is about to be added to perform the reset sequence of > the Infineon SLB9670 Trusted Platform Module. > > Document its device tree bindings. > > Signed-off-by: Lukas Wunner <lukas@xxxxxxxxx> > --- > .../bindings/reset/infineon,slb9670-reset.yaml | 68 ++++++++++++++++++++++ > 1 file changed, 68 insertions(+) > create mode 100644 Documentation/devicetree/bindings/reset/infineon,slb9670-reset.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/reset/infineon,slb9670-reset.yaml:29:111: [warning] line too long (124 > 110 characters) (line-length) dtschema/dtc warnings/errors: Documentation/devicetree/bindings/reset/infineon,slb9670-reset.example.dtb: /example-0/spi/tpm@0: failed to match any schema with compatible: ['infineon,slb9670'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/ae40859b82494d75e9ad7bf616b3264138ad1f6a.1695754856.git.lukas@xxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
