On 26.09.2023 06:48, Raghavendra Kakarla wrote:
> Add device node for sleep stats driver which provides various
> low power mode stats.
>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Signed-off-by: Raghavendra Kakarla <quic_rkakarla@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sa8775p.dtsi | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> index 9f4f58e831a4..cee7491de675 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> @@ -1912,6 +1912,11 @@
> #clock-cells = <0>;
> };
>
> + sram@c3f0000 {
> + compatible = "qcom,rpmh-stats";
> + reg = <0 0x0c3f0000 0 0x400>;
Other nodes (such as the one 5 lines below) use 0x0 instead of
0 to fill out bits 63:32. Please make it consistent.
Konrad
> + };
> +
> spmi_bus: spmi@c440000 {
> compatible = "qcom,spmi-pmic-arb";
> reg = <0x0 0x0c440000 0x0 0x1100>,
