Hi Alexander, On Fri, 19 Dec 2014 09:51:37 +0100 Alexander Stein <alexanders83@xxxxxx> wrote: > This is based on and requires Boris' work on an EBI driver for AT91. Please > refer to https://lkml.org/lkml/2014/12/3/806. > The reason I added no pinctrl is that those pins from EBI1 in my case are not > muxable. They are fixed so there is nothing I can test here. > I used this patchset and the EBI to configure a PSRAM to be used by the > atmel_lcdfb driver which works so far. > This also means EBI0 is rather untested, but it should behave like EBI1 if > the numbers are correct. Thanks for your patches. Unless there are other changes in the EBI/SMC bindings (which I'm not sure since the EBI driver has not been accepted yet) you have my Acked-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx> Regards, Boris -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
