The whole series is Acked-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx> On 19/12/2014 at 09:51:37 +0100, Alexander Stein wrote : > This is based on and requires Boris' work on an EBI driver for AT91. Please > refer to https://lkml.org/lkml/2014/12/3/806. > The reason I added no pinctrl is that those pins from EBI1 in my case are not > muxable. They are fixed so there is nothing I can test here. > I used this patchset and the EBI to configure a PSRAM to be used by the > atmel_lcdfb driver which works so far. > This also means EBI0 is rather untested, but it should behave like EBI1 if > the numbers are correct. > > Best regards, > Alexander > > Alexander Stein (3): > ARM: at91/dt: add matrix node in at91sam9263 dtsi > ARM: at91/dt: add SMC0/1 nodes in at91sam9263 dtsi > ARM: at91/dt: add EBI (External Bus Interface) node in at91sam9263 > dtsi > > arch/arm/boot/dts/at91sam9263.dtsi | 44 ++++++++++++++++++++++++++++++++++++++ > 1 file changed, 44 insertions(+) > > -- > 2.2.1 > -- Alexandre Belloni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
