Re: [PATCH v3 1/2] dt-bindings: mfd: x-powers,axp152: make interrupt optional for more chips

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 24 Sep 2023, Jernej Škrabec wrote:

> Dne torek, 19. september 2023 ob 12:39:12 CEST je Andre Przywara napisal(a):
> > All X-Powers PMICs described by this binding have an IRQ pin, and so
> > far (almost) all boards connected this to some NMI pin or GPIO on the SoC
> > they are connected to.
> > However we start to see boards that omit this connection, and technically
> > the IRQ pin is not essential to the basic PMIC operation.
> > 
> > The existing Linux driver allows skipping the IRQ pin setup for two chips
> > already, so update the binding to also make the DT property optional for
> > the missing chip. And while we are at it, add the AXP313a to that list,
> > as they are actually boards out there not connecting the IRQ pin.
> > 
> > This allows to have DTs correctly describing those boards not wiring up
> > the interrupt.
> > 
> > Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
> > Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> 
> Should I pick this patch through sunxi tree?

No thank you.

-- 
Lee Jones [李琼斯]




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux