This series adds support for the APSS clock to bump the CPU frequency above 800MHz. APSS PLL found in the IPQ5018 is of type Stromer. - The first patch in the series adds the required a53pll compatible. - The second patch reuses Stormer Plus PLL offsets, adds configuration values for Stromer. - The third patch adds dts nodes to enable the pll along with the cpu operating frequency table. This series depends on below series https://patchwork.kernel.org/project/linux-arm-msm/cover/20230913-gpll_cleanup-v2-0-c8ceb1a37680@xxxxxxxxxxx/ Changes in v2: - Addressed review comments - Adds dependency on above mentioned patch series for dropping CLK_SET_RATE_PARENT flag from GPLL clocks, GPLL0 clock provider for mailbox - Add CPU operating point at 800MHz based on the review comments. Gokul Sriram Palanisamy (3): dt-bindings: clock: qcom,a53pll: add IPQ5018 compatible clk: qcom: apss-ipq-pll: add support for IPQ5018 arm64: dts: qcom: ipq5018: enable the CPUFreq support .../bindings/clock/qcom,a53pll.yaml | 1 + arch/arm64/boot/dts/qcom/ipq5018.dtsi | 40 +++++++++++++++++++ drivers/clk/qcom/apss-ipq-pll.c | 21 ++++++++++ 3 files changed, 62 insertions(+) -- 2.34.1
