From: Chris Morgan <macromorgan@xxxxxxxxxxx>
Add the EHCI and OHCI controller to the Allwinner v3s to support using
USB in host mode.
Signed-off-by: Chris Morgan <macromorgan@xxxxxxxxxxx>
Reviewed-by: Andre Przywara <andre.przywara@xxxxxxx>
---
arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi | 23 ++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
index c87476ea31e2..e8a04476b776 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
@@ -319,6 +319,29 @@ usbphy: phy@1c19400 {
#phy-cells = <1>;
};
+ ehci: usb@1c1a000 {
+ compatible = "allwinner,sun8i-v3s-ehci", "generic-ehci";
+ reg = <0x01c1a000 0x100>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
+ resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci: usb@1c1a400 {
+ compatible = "allwinner,sun8i-v3s-ohci", "generic-ohci";
+ reg = <0x01c1a400 0x100>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
+ <&ccu CLK_USB_OHCI0>;
+ resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
ccu: clock@1c20000 {
compatible = "allwinner,sun8i-v3s-ccu";
reg = <0x01c20000 0x400>;
--
2.34.1
