On 16:34-20230920, Roger Quadros wrote: > The NAND expansion card plugs in over the HSE (High Speed Expansion) > connector. Add support for it. > > Signed-off-by: Roger Quadros <rogerq@xxxxxxxxxx> > --- > arch/arm64/boot/dts/ti/Makefile | 1 + > arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso | 140 ++++++++++++++++++ > 2 files changed, 141 insertions(+) > create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso > > diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile > index 06d6f264f292..ece74085a6be 100644 > --- a/arch/arm64/boot/dts/ti/Makefile > +++ b/arch/arm64/boot/dts/ti/Makefile > @@ -29,6 +29,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb > > # Boards with AM64x SoC > dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb > +dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-nand.dtbo > dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb > dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb > dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl.dtb Also see https://lore.kernel.org/all/20230911165610.GA1362932-robh@xxxxxxxxxx/ you may not get the dtbo installed when doing make dtbs_install [...] -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
