Robert Marko <robert.marko@xxxxxxxxxx> writes: > Rename the GPIO related SFP properties to include the preffered -gpios > suffix as defined in the SFP schema. > > This fixes the following warning: > arch/arm64/boot/dts/marvell/armada-3720-eDPU.dtb: sfp-eth1: 'los-gpio', 'mod-def0-gpio', 'tx-disable-gpio', 'tx-fault-gpio' do not match any of the regexes: 'pinctrl-[0-9]+' > from schema $id: http://devicetree.org/schemas/net/sff,sfp.yaml# > Applied on mvebu/dt64 Thanks, Gregory > Signed-off-by: Robert Marko <robert.marko@xxxxxxxxxx> > --- > arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi > index 3f79923376fb..3a9b6907185d 100644 > --- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi > +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi > @@ -61,10 +61,10 @@ led-alarm2 { > sfp_eth1: sfp-eth1 { > compatible = "sff,sfp"; > i2c-bus = <&i2c1>; > - los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>; > - mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>; > - tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>; > - tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>; > + los-gpios = <&gpiosb 7 GPIO_ACTIVE_HIGH>; > + mod-def0-gpios = <&gpiosb 8 GPIO_ACTIVE_LOW>; > + tx-disable-gpios = <&gpiosb 9 GPIO_ACTIVE_HIGH>; > + tx-fault-gpios = <&gpiosb 10 GPIO_ACTIVE_HIGH>; > maximum-power-milliwatt = <3000>; > }; > }; > -- > 2.41.0 > -- Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com
