Re: [PATCH v3 2/2] media: i2c: Add driver for onsemi MT9M114 camera sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi LAurent

On Wed, Sep 20, 2023 at 02:26:26AM +0300, Laurent Pinchart wrote:
> The MT9M114 is a CMOS camera sensor that combines a 1296x976 pixel array
> with a 10-bit dynamic range together with an internal ISP. The driver
> exposes two subdevs, one for the pixel array and one for the ISP (named
> IFP for Image Flow Processor). Major supported features are
>
> - Full configuration of analog crop and binning in the pixel array
> - Full configuration of scaling in the ISP
> - Automatic exposure and white balance
> - Manual exposure and analog gain
> - Horizontal and vertical flip
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> Changes since v2:
>
> - Update to v4l2-mediabus API changes
> - Fix CAM_SENSOR_CFG_CPIPE_LAST_ROW in binned mode
> - Initialize formats before controls
> - Implement HBLANK and VBLANK controls
> - Setup pixel array control at stream on time
> - Increase maximum supported frame rate
> - Update to I2C's new .remove() signature
> - Switch to I2C .probe_new()

Since aaeb31c00e61 ("media: Switch i2c drivers back to use .probe()")
we're back to just .probe()

> - Free pixel array controls
> - Cleanup on pixel array init errors
> - Cleanup on IFP init errors
> - Use V4L2 subdev active state for IFP
> - Use V4L2 subdev active state for PA
> - Update copyright years
> - Drop unneeded variable initialization
> - Move flip controls to pixel array
> - Take lock around frame rate access
> - Drop driver name override for subdev name
> - Use local dev variable in probe
> - Use dev_err_probe()
> - Simplify error handling in mt9m114_initialize()
> - Reorder functions
> - Fix typo
> - Implement runtime PM
> - Use CCI helpers
> - Drop dependency on OF
> - Don't include slab.h
> - Drop macro for reserved Y average mode
> - Set bit 15 in CAM_PORT_OUTPUT_CONTROL for MIPI mode
> - Don't set MIPI continuous clock bit for parallel output
> - Drop driver name override for subdev name
> - Pass correct number of controls to handler
> - Drop log message at end of probe
> - Add link frequency support
> - Use GPL for MODULE_LICENSE()
>
> Changes since v1:
>
> - Add locking to protect formats and selection rectangles
> - Move PLL configuration out of register array to code
> - Add V4L2_SEL_TGT_NATIVE_SIZE support
> - Add V4L2_CID_PIXEL_RATE support
> - Set bus_type to V4L2_MBUS_UNKNOWN explicitly
> - Add OF match table support
> - Rename MAX_FRAME_RATE macro with MT9M114 prefix and use it through the
>   driver
> - Fix crash if controls initialization fails
> - Fix indentation
> - Add support for test pattern generator
> - Define colorspace-related registers
> - Fix typo in comment
> - Centralize format information
> - Select media bus formats based on bus type
> - Add MIPI timing registers
> - Print monitor version
> - Fix clock retrieval error code
> - Manually enter standby in parallel mode
> - Use the ISP media entity function for the IFP
> - Fix access to 32-bit registers
> - Use OF device match unconditionally
> - Switch to V4L2_CID_EXPOSURE
> - Update to the latest subdev API
> - Rename Aptina to onsemi
> ---
>  MAINTAINERS                 |    3 +-
>  drivers/media/i2c/Kconfig   |   10 +
>  drivers/media/i2c/Makefile  |    1 +
>  drivers/media/i2c/mt9m114.c | 2482 +++++++++++++++++++++++++++++++++++
>  4 files changed, 2495 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/media/i2c/mt9m114.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index e4ebb8d0708a..8369f5ab367b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -14544,7 +14544,8 @@ M:	Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
>  L:	linux-media@xxxxxxxxxxxxxxx
>  S:	Maintained
>  T:	git git://linuxtv.org/media_tree.git
> -F:	Documentation/devicetree/bindings/media/i2c.onnn,mt9m114.yaml

This should probably be fixed in the previous patch

> +F:	Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
> +F:	drivers/media/i2c/mt9m114.c
>
>  MT9P031 APTINA CAMERA SENSOR
>  M:	Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index 74ff833ff48c..897d02f0b552 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -215,6 +215,16 @@ config VIDEO_MT9M111
>  	  This driver supports MT9M111, MT9M112 and MT9M131 cameras from
>  	  Micron/Aptina
>
> +config VIDEO_MT9M114
> +	tristate "onsemi MT9M114 sensor support"

Is "onsemi" intentionally spelled all lower-case ?

> +	select V4L2_CCI_I2C
> +	help
> +	  This is a Video4Linux2 sensor-level driver for the onsemi MT9M114
> +	  camera.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called mt9m114.
> +
>  config VIDEO_MT9P031
>  	tristate "Aptina MT9P031 support"
>  	select VIDEO_APTINA_PLL
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index 80b00d39b48f..f5010f80a21f 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -65,6 +65,7 @@ obj-$(CONFIG_VIDEO_ML86V7667) += ml86v7667.o
>  obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o
>  obj-$(CONFIG_VIDEO_MT9M001) += mt9m001.o
>  obj-$(CONFIG_VIDEO_MT9M111) += mt9m111.o
> +obj-$(CONFIG_VIDEO_MT9M114) += mt9m114.o
>  obj-$(CONFIG_VIDEO_MT9P031) += mt9p031.o
>  obj-$(CONFIG_VIDEO_MT9T112) += mt9t112.o
>  obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o
> diff --git a/drivers/media/i2c/mt9m114.c b/drivers/media/i2c/mt9m114.c
> new file mode 100644
> index 000000000000..c002503d0601
> --- /dev/null
> +++ b/drivers/media/i2c/mt9m114.c
> @@ -0,0 +1,2482 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * mt9m114.c onsemi MT9M114 sensor driver
> + *
> + * Copyright (c) 2020-2023 Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> + * Copyright (c) 2012 Analog Devices Inc.
> + *
> + * Almost complete rewrite of work by Scott Jiang <Scott.Jiang.Linux@xxxxxxxxx>
> + * itself based on work from Andrew Chew <achew@xxxxxxxxxx>.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/errno.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/types.h>
> +#include <linux/videodev2.h>
> +
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-cci.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-mediabus.h>
> +#include <media/v4l2-subdev.h>
> +
> +/* Sysctl registers */
> +#define MT9M114_CHIP_ID					CCI_REG16(0x0000)
> +#define MT9M114_COMMAND_REGISTER			CCI_REG16(0x0080)
> +#define MT9M114_COMMAND_REGISTER_APPLY_PATCH			BIT(0)
> +#define MT9M114_COMMAND_REGISTER_SET_STATE			BIT(1)
> +#define MT9M114_COMMAND_REGISTER_REFRESH			BIT(2)
> +#define MT9M114_COMMAND_REGISTER_WAIT_FOR_EVENT			BIT(3)
> +#define MT9M114_COMMAND_REGISTER_OK				BIT(15)
> +#define MT9M114_RESET_AND_MISC_CONTROL			CCI_REG16(0x001a)
> +#define MT9M114_RESET_SOC					BIT(0)
> +#define MT9M114_PAD_SLEW				CCI_REG16(0x001e)
> +#define MT9M114_PAD_CONTROL				CCI_REG16(0x0032)
> +
> +/* XDMA registers */
> +#define MT9M114_ACCESS_CTL_STAT				CCI_REG16(0x0982)
> +#define MT9M114_PHYSICAL_ADDRESS_ACCESS			CCI_REG16(0x098a)
> +#define MT9M114_LOGICAL_ADDRESS_ACCESS			CCI_REG16(0x098e)
> +
> +/* Sensor Core registers */
> +#define MT9M114_COARSE_INTEGRATION_TIME			CCI_REG16(0x3012)
> +#define MT9M114_FINE_INTEGRATION_TIME			CCI_REG16(0x3014)
> +#define MT9M114_RESET_REGISTER				CCI_REG16(0x301a)
> +#define MT9M114_RESET_REGISTER_LOCK_REG				BIT(3)
> +#define MT9M114_RESET_REGISTER_MASK_BAD				BIT(9)
> +#define MT9M114_FLASH					CCI_REG16(0x3046)
> +#define MT9M114_GREEN1_GAIN				CCI_REG16(0x3056)
> +#define MT9M114_BLUE_GAIN				CCI_REG16(0x3058)
> +#define MT9M114_RED_GAIN				CCI_REG16(0x305a)
> +#define MT9M114_GREEN2_GAIN				CCI_REG16(0x305c)
> +#define MT9M114_GLOBAL_GAIN				CCI_REG16(0x305e)
> +#define MT9M114_GAIN_DIGITAL_GAIN(n)				((n) << 12)
> +#define MT9M114_GAIN_DIGITAL_GAIN_MASK				(0xf << 12)
> +#define MT9M114_GAIN_ANALOG_GAIN(n)				((n) << 0)
> +#define MT9M114_GAIN_ANALOG_GAIN_MASK				(0xff << 0)
> +#define MT9M114_CUSTOMER_REV				CCI_REG16(0x31fe)
> +
> +/* Monitor registers */
> +#define MT9M114_MON_MAJOR_VERSION			CCI_REG16(0x8000)
> +#define MT9M114_MON_MINOR_VERSION			CCI_REG16(0x8002)
> +#define MT9M114_MON_RELEASE_VERSION			CCI_REG16(0x8004)
> +
> +/* Auto-Exposure Track registers */
> +#define MT9M114_AE_TRACK_ALGO				CCI_REG16(0xa804)
> +#define MT9M114_AE_TRACK_EXEC_AUTOMATIC_EXPOSURE		BIT(0)
> +#define MT9M114_AE_TRACK_AE_TRACKING_DAMPENING_SPEED	CCI_REG8(0xa80a)
> +
> +/* Color Correction Matrix registers */
> +#define MT9M114_CCM_ALGO				CCI_REG16(0xb404)
> +#define MT9M114_CCM_EXEC_CALC_CCM_MATRIX			BIT(4)
> +#define MT9M114_CCM_DELTA_GAIN				CCI_REG8(0xb42a)
> +
> +/* Camera Control registers */
> +#define MT9M114_CAM_SENSOR_CFG_Y_ADDR_START		CCI_REG16(0xc800)
> +#define MT9M114_CAM_SENSOR_CFG_X_ADDR_START		CCI_REG16(0xc802)
> +#define MT9M114_CAM_SENSOR_CFG_Y_ADDR_END		CCI_REG16(0xc804)
> +#define MT9M114_CAM_SENSOR_CFG_X_ADDR_END		CCI_REG16(0xc806)
> +#define MT9M114_CAM_SENSOR_CFG_PIXCLK			CCI_REG32(0xc808)
> +#define MT9M114_CAM_SENSOR_CFG_ROW_SPEED		CCI_REG16(0xc80c)
> +#define MT9M114_CAM_SENSOR_CFG_FINE_INTEG_TIME_MIN	CCI_REG16(0xc80e)
> +#define MT9M114_CAM_SENSOR_CFG_FINE_INTEG_TIME_MAX	CCI_REG16(0xc810)
> +#define MT9M114_CAM_SENSOR_CFG_FRAME_LENGTH_LINES	CCI_REG16(0xc812)
> +#define MT9M114_CAM_SENSOR_CFG_LINE_LENGTH_PCK		CCI_REG16(0xc814)
> +#define MT9M114_CAM_SENSOR_CFG_FINE_CORRECTION		CCI_REG16(0xc816)
> +#define MT9M114_CAM_SENSOR_CFG_CPIPE_LAST_ROW		CCI_REG16(0xc818)
> +#define MT9M114_CAM_SENSOR_CFG_REG_0_DATA		CCI_REG16(0xc826)
> +#define MT9M114_CAM_SENSOR_CONTROL_READ_MODE		CCI_REG16(0xc834)
> +#define MT9M114_CAM_SENSOR_CONTROL_HORZ_MIRROR_EN		BIT(0)
> +#define MT9M114_CAM_SENSOR_CONTROL_VERT_FLIP_EN			BIT(1)
> +#define MT9M114_CAM_SENSOR_CONTROL_X_READ_OUT_NORMAL		(0 << 4)
> +#define MT9M114_CAM_SENSOR_CONTROL_X_READ_OUT_SKIPPING		(1 << 4)
> +#define MT9M114_CAM_SENSOR_CONTROL_X_READ_OUT_AVERAGE		(2 << 4)
> +#define MT9M114_CAM_SENSOR_CONTROL_X_READ_OUT_SUMMING		(3 << 4)
> +#define MT9M114_CAM_SENSOR_CONTROL_X_READ_OUT_MASK		(3 << 4)
> +#define MT9M114_CAM_SENSOR_CONTROL_Y_READ_OUT_NORMAL		(0 << 8)
> +#define MT9M114_CAM_SENSOR_CONTROL_Y_READ_OUT_SKIPPING		(1 << 8)
> +#define MT9M114_CAM_SENSOR_CONTROL_Y_READ_OUT_SUMMING		(3 << 8)
> +#define MT9M114_CAM_SENSOR_CONTROL_Y_READ_OUT_MASK		(3 << 8)
> +#define MT9M114_CAM_SENSOR_CONTROL_ANALOG_GAIN		CCI_REG16(0xc836)
> +#define MT9M114_CAM_SENSOR_CONTROL_COARSE_INTEGRATION_TIME	CCI_REG16(0xc83c)
> +#define MT9M114_CAM_SENSOR_CONTROL_FINE_INTEGRATION_TIME	CCI_REG16(0xc83e)
> +#define MT9M114_CAM_MODE_SELECT				CCI_REG8(0xc84c)
> +#define MT9M114_CAM_MODE_SELECT_NORMAL				(0 << 0)
> +#define MT9M114_CAM_MODE_SELECT_LENS_CALIBRATION		(1 << 0)
> +#define MT9M114_CAM_MODE_SELECT_TEST_PATTERN			(2 << 0)
> +#define MT9M114_CAM_MODE_TEST_PATTERN_SELECT		CCI_REG8(0xc84d)
> +#define MT9M114_CAM_MODE_TEST_PATTERN_SELECT_SOLID		(1 << 0)
> +#define MT9M114_CAM_MODE_TEST_PATTERN_SELECT_SOLID_BARS		(4 << 0)
> +#define MT9M114_CAM_MODE_TEST_PATTERN_SELECT_RANDOM		(5 << 0)
> +#define MT9M114_CAM_MODE_TEST_PATTERN_SELECT_FADING_BARS	(8 << 0)
> +#define MT9M114_CAM_MODE_TEST_PATTERN_SELECT_WALKING_1S_10B	(10 << 0)
> +#define MT9M114_CAM_MODE_TEST_PATTERN_SELECT_WALKING_1S_8B	(11 << 0)
> +#define MT9M114_CAM_MODE_TEST_PATTERN_RED		CCI_REG16(0xc84e)
> +#define MT9M114_CAM_MODE_TEST_PATTERN_GREEN		CCI_REG16(0xc850)
> +#define MT9M114_CAM_MODE_TEST_PATTERN_BLUE		CCI_REG16(0xc852)
> +#define MT9M114_CAM_CROP_WINDOW_XOFFSET			CCI_REG16(0xc854)
> +#define MT9M114_CAM_CROP_WINDOW_YOFFSET			CCI_REG16(0xc856)
> +#define MT9M114_CAM_CROP_WINDOW_WIDTH			CCI_REG16(0xc858)
> +#define MT9M114_CAM_CROP_WINDOW_HEIGHT			CCI_REG16(0xc85a)
> +#define MT9M114_CAM_CROP_CROPMODE			CCI_REG8(0xc85c)
> +#define MT9M114_CAM_CROP_MODE_AE_AUTO_CROP_EN			BIT(0)
> +#define MT9M114_CAM_CROP_MODE_AWB_AUTO_CROP_EN			BIT(1)
> +#define MT9M114_CAM_OUTPUT_WIDTH			CCI_REG16(0xc868)
> +#define MT9M114_CAM_OUTPUT_HEIGHT			CCI_REG16(0xc86a)
> +#define MT9M114_CAM_OUTPUT_FORMAT			CCI_REG16(0xc86c)
> +#define MT9M114_CAM_OUTPUT_FORMAT_SWAP_RED_BLUE			BIT(0)
> +#define MT9M114_CAM_OUTPUT_FORMAT_SWAP_BYTES			BIT(1)
> +#define MT9M114_CAM_OUTPUT_FORMAT_MONO_ENABLE			BIT(2)
> +#define MT9M114_CAM_OUTPUT_FORMAT_BT656_ENABLE			BIT(3)
> +#define MT9M114_CAM_OUTPUT_FORMAT_BT656_CROP_SCALE_DISABLE	BIT(4)
> +#define MT9M114_CAM_OUTPUT_FORMAT_FVLV_DISABLE			BIT(5)
> +#define MT9M114_CAM_OUTPUT_FORMAT_FORMAT_YUV			(0 << 8)
> +#define MT9M114_CAM_OUTPUT_FORMAT_FORMAT_RGB			(1 << 8)
> +#define MT9M114_CAM_OUTPUT_FORMAT_FORMAT_BAYER			(2 << 8)
> +#define MT9M114_CAM_OUTPUT_FORMAT_FORMAT_NONE			(3 << 8)
> +#define MT9M114_CAM_OUTPUT_FORMAT_FORMAT_MASK			(3 << 8)
> +#define MT9M114_CAM_OUTPUT_FORMAT_BAYER_FORMAT_RAWR10		(0 << 10)
> +#define MT9M114_CAM_OUTPUT_FORMAT_BAYER_FORMAT_PRELSC_8_2	(1 << 10)
> +#define MT9M114_CAM_OUTPUT_FORMAT_BAYER_FORMAT_POSTLSC_8_2	(2 << 10)
> +#define MT9M114_CAM_OUTPUT_FORMAT_BAYER_FORMAT_PROCESSED8	(3 << 10)
> +#define MT9M114_CAM_OUTPUT_FORMAT_BAYER_FORMAT_MASK		(3 << 10)
> +#define MT9M114_CAM_OUTPUT_FORMAT_RGB_FORMAT_565RGB		(0 << 12)
> +#define MT9M114_CAM_OUTPUT_FORMAT_RGB_FORMAT_555RGB		(1 << 12)
> +#define MT9M114_CAM_OUTPUT_FORMAT_RGB_FORMAT_444xRGB		(2 << 12)
> +#define MT9M114_CAM_OUTPUT_FORMAT_RGB_FORMAT_444RGBx		(3 << 12)
> +#define MT9M114_CAM_OUTPUT_FORMAT_RGB_FORMAT_MASK		(3 << 12)
> +#define MT9M114_CAM_OUTPUT_FORMAT_YUV			CCI_REG16(0xc86e)
> +#define MT9M114_CAM_OUTPUT_FORMAT_YUV_CLIP			BIT(5)
> +#define MT9M114_CAM_OUTPUT_FORMAT_YUV_AUV_OFFSET		BIT(4)
> +#define MT9M114_CAM_OUTPUT_FORMAT_YUV_SELECT_601		BIT(3)
> +#define MT9M114_CAM_OUTPUT_FORMAT_YUV_NORMALISE			BIT(2)
> +#define MT9M114_CAM_OUTPUT_FORMAT_YUV_SAMPLING_EVEN_UV		(0 << 0)
> +#define MT9M114_CAM_OUTPUT_FORMAT_YUV_SAMPLING_ODD_UV		(1 << 0)
> +#define MT9M114_CAM_OUTPUT_FORMAT_YUV_SAMPLING_EVENU_ODDV	(2 << 0)
> +#define MT9M114_CAM_OUTPUT_Y_OFFSET			CCI_REG8(0xc870)
> +#define MT9M114_CAM_AET_AEMODE				CCI_REG8(0xc878)
> +#define MT9M114_CAM_AET_EXEC_SET_INDOOR				BIT(0)
> +#define MT9M114_CAM_AET_DISCRETE_FRAMERATE			BIT(1)
> +#define MT9M114_CAM_AET_ADAPTATIVE_TARGET_LUMA			BIT(2)
> +#define MT9M114_CAM_AET_ADAPTATIVE_SKIP_FRAMES			BIT(3)
> +#define MT9M114_CAM_AET_SKIP_FRAMES			CCI_REG8(0xc879)
> +#define MT9M114_CAM_AET_TARGET_AVERAGE_LUMA		CCI_REG8(0xc87a)
> +#define MT9M114_CAM_AET_TARGET_AVERAGE_LUMA_DARK	CCI_REG8(0xc87b)
> +#define MT9M114_CAM_AET_BLACK_CLIPPING_TARGET		CCI_REG16(0xc87c)
> +#define MT9M114_CAM_AET_AE_MIN_VIRT_INT_TIME_PCLK	CCI_REG16(0xc87e)
> +#define MT9M114_CAM_AET_AE_MIN_VIRT_DGAIN		CCI_REG16(0xc880)
> +#define MT9M114_CAM_AET_AE_MAX_VIRT_DGAIN		CCI_REG16(0xc882)
> +#define MT9M114_CAM_AET_AE_MIN_VIRT_AGAIN		CCI_REG16(0xc884)
> +#define MT9M114_CAM_AET_AE_MAX_VIRT_AGAIN		CCI_REG16(0xc886)
> +#define MT9M114_CAM_AET_AE_VIRT_GAIN_TH_EG		CCI_REG16(0xc888)
> +#define MT9M114_CAM_AET_AE_EG_GATE_PERCENTAGE		CCI_REG8(0xc88a)
> +#define MT9M114_CAM_AET_FLICKER_FREQ_HZ			CCI_REG8(0xc88b)
> +#define MT9M114_CAM_AET_MAX_FRAME_RATE			CCI_REG16(0xc88c)
> +#define MT9M114_CAM_AET_MIN_FRAME_RATE			CCI_REG16(0xc88e)
> +#define MT9M114_CAM_AET_TARGET_GAIN			CCI_REG16(0xc890)
> +#define MT9M114_CAM_AWB_CCM_L(n)			CCI_REG16(0xc892 + (n) * 2)
> +#define MT9M114_CAM_AWB_CCM_M(n)			CCI_REG16(0xc8a4 + (n) * 2)
> +#define MT9M114_CAM_AWB_CCM_R(n)			CCI_REG16(0xc8b6 + (n) * 2)
> +#define MT9M114_CAM_AWB_CCM_L_RG_GAIN			CCI_REG16(0xc8c8)
> +#define MT9M114_CAM_AWB_CCM_L_BG_GAIN			CCI_REG16(0xc8ca)
> +#define MT9M114_CAM_AWB_CCM_M_RG_GAIN			CCI_REG16(0xc8cc)
> +#define MT9M114_CAM_AWB_CCM_M_BG_GAIN			CCI_REG16(0xc8ce)
> +#define MT9M114_CAM_AWB_CCM_R_RG_GAIN			CCI_REG16(0xc8d0)
> +#define MT9M114_CAM_AWB_CCM_R_BG_GAIN			CCI_REG16(0xc8d2)
> +#define MT9M114_CAM_AWB_CCM_L_CTEMP			CCI_REG16(0xc8d4)
> +#define MT9M114_CAM_AWB_CCM_M_CTEMP			CCI_REG16(0xc8d6)
> +#define MT9M114_CAM_AWB_CCM_R_CTEMP			CCI_REG16(0xc8d8)
> +#define MT9M114_CAM_AWB_AWB_XSCALE			CCI_REG8(0xc8f2)
> +#define MT9M114_CAM_AWB_AWB_YSCALE			CCI_REG8(0xc8f3)
> +#define MT9M114_CAM_AWB_AWB_WEIGHTS(n)			CCI_REG16(0xc8f4 + (n) * 2)
> +#define MT9M114_CAM_AWB_AWB_XSHIFT_PRE_ADJ		CCI_REG16(0xc904)
> +#define MT9M114_CAM_AWB_AWB_YSHIFT_PRE_ADJ		CCI_REG16(0xc906)
> +#define MT9M114_CAM_AWB_AWBMODE				CCI_REG8(0xc909)
> +#define MT9M114_CAM_AWB_MODE_AUTO				BIT(1)
> +#define MT9M114_CAM_AWB_MODE_EXCLUSIVE_AE			BIT(0)
> +#define MT9M114_CAM_AWB_K_R_L				CCI_REG8(0xc90c)
> +#define MT9M114_CAM_AWB_K_G_L				CCI_REG8(0xc90d)
> +#define MT9M114_CAM_AWB_K_B_L				CCI_REG8(0xc90e)
> +#define MT9M114_CAM_AWB_K_R_R				CCI_REG8(0xc90f)
> +#define MT9M114_CAM_AWB_K_G_R				CCI_REG8(0xc910)
> +#define MT9M114_CAM_AWB_K_B_R				CCI_REG8(0xc911)
> +#define MT9M114_CAM_STAT_AWB_CLIP_WINDOW_XSTART		CCI_REG16(0xc914)
> +#define MT9M114_CAM_STAT_AWB_CLIP_WINDOW_YSTART		CCI_REG16(0xc916)
> +#define MT9M114_CAM_STAT_AWB_CLIP_WINDOW_XEND		CCI_REG16(0xc918)
> +#define MT9M114_CAM_STAT_AWB_CLIP_WINDOW_YEND		CCI_REG16(0xc91a)
> +#define MT9M114_CAM_STAT_AE_INITIAL_WINDOW_XSTART	CCI_REG16(0xc91c)
> +#define MT9M114_CAM_STAT_AE_INITIAL_WINDOW_YSTART	CCI_REG16(0xc91e)
> +#define MT9M114_CAM_STAT_AE_INITIAL_WINDOW_XEND		CCI_REG16(0xc920)
> +#define MT9M114_CAM_STAT_AE_INITIAL_WINDOW_YEND		CCI_REG16(0xc922)
> +#define MT9M114_CAM_LL_LLMODE				CCI_REG16(0xc924)
> +#define MT9M114_CAM_LL_START_BRIGHTNESS			CCI_REG16(0xc926)
> +#define MT9M114_CAM_LL_STOP_BRIGHTNESS			CCI_REG16(0xc928)
> +#define MT9M114_CAM_LL_START_SATURATION			CCI_REG8(0xc92a)
> +#define MT9M114_CAM_LL_END_SATURATION			CCI_REG8(0xc92b)
> +#define MT9M114_CAM_LL_START_DESATURATION		CCI_REG8(0xc92c)
> +#define MT9M114_CAM_LL_END_DESATURATION			CCI_REG8(0xc92d)
> +#define MT9M114_CAM_LL_START_DEMOSAICING		CCI_REG8(0xc92e)
> +#define MT9M114_CAM_LL_START_AP_GAIN			CCI_REG8(0xc92f)
> +#define MT9M114_CAM_LL_START_AP_THRESH			CCI_REG8(0xc930)
> +#define MT9M114_CAM_LL_STOP_DEMOSAICING			CCI_REG8(0xc931)
> +#define MT9M114_CAM_LL_STOP_AP_GAIN			CCI_REG8(0xc932)
> +#define MT9M114_CAM_LL_STOP_AP_THRESH			CCI_REG8(0xc933)
> +#define MT9M114_CAM_LL_START_NR_RED			CCI_REG8(0xc934)
> +#define MT9M114_CAM_LL_START_NR_GREEN			CCI_REG8(0xc935)
> +#define MT9M114_CAM_LL_START_NR_BLUE			CCI_REG8(0xc936)
> +#define MT9M114_CAM_LL_START_NR_THRESH			CCI_REG8(0xc937)
> +#define MT9M114_CAM_LL_STOP_NR_RED			CCI_REG8(0xc938)
> +#define MT9M114_CAM_LL_STOP_NR_GREEN			CCI_REG8(0xc939)
> +#define MT9M114_CAM_LL_STOP_NR_BLUE			CCI_REG8(0xc93a)
> +#define MT9M114_CAM_LL_STOP_NR_THRESH			CCI_REG8(0xc93b)
> +#define MT9M114_CAM_LL_START_CONTRAST_BM		CCI_REG16(0xc93c)
> +#define MT9M114_CAM_LL_STOP_CONTRAST_BM			CCI_REG16(0xc93e)
> +#define MT9M114_CAM_LL_GAMMA				CCI_REG16(0xc940)
> +#define MT9M114_CAM_LL_START_CONTRAST_GRADIENT		CCI_REG8(0xc942)
> +#define MT9M114_CAM_LL_STOP_CONTRAST_GRADIENT		CCI_REG8(0xc943)
> +#define MT9M114_CAM_LL_START_CONTRAST_LUMA_PERCENTAGE	CCI_REG8(0xc944)
> +#define MT9M114_CAM_LL_STOP_CONTRAST_LUMA_PERCENTAGE	CCI_REG8(0xc945)
> +#define MT9M114_CAM_LL_START_GAIN_METRIC		CCI_REG16(0xc946)
> +#define MT9M114_CAM_LL_STOP_GAIN_METRIC			CCI_REG16(0xc948)
> +#define MT9M114_CAM_LL_START_FADE_TO_BLACK_LUMA		CCI_REG16(0xc94a)
> +#define MT9M114_CAM_LL_STOP_FADE_TO_BLACK_LUMA		CCI_REG16(0xc94c)
> +#define MT9M114_CAM_LL_CLUSTER_DC_TH_BM			CCI_REG16(0xc94e)
> +#define MT9M114_CAM_LL_CLUSTER_DC_GATE_PERCENTAGE	CCI_REG8(0xc950)
> +#define MT9M114_CAM_LL_SUMMING_SENSITIVITY_FACTOR	CCI_REG8(0xc951)
> +#define MT9M114_CAM_LL_START_TARGET_LUMA_BM		CCI_REG16(0xc952)
> +#define MT9M114_CAM_LL_STOP_TARGET_LUMA_BM		CCI_REG16(0xc954)
> +#define MT9M114_CAM_PGA_PGA_CONTROL			CCI_REG16(0xc95e)
> +#define MT9M114_CAM_SYSCTL_PLL_ENABLE			CCI_REG8(0xc97e)
> +#define MT9M114_CAM_SYSCTL_PLL_ENABLE_VALUE			BIT(0)
> +#define MT9M114_CAM_SYSCTL_PLL_DIVIDER_M_N		CCI_REG16(0xc980)
> +#define MT9M114_CAM_SYSCTL_PLL_DIVIDER_VALUE(m, n)		(((n) << 8) | (m))
> +#define MT9M114_CAM_SYSCTL_PLL_DIVIDER_P		CCI_REG16(0xc982)
> +#define MT9M114_CAM_SYSCTL_PLL_DIVIDER_P_VALUE(p)		((p) << 8)
> +#define MT9M114_CAM_PORT_OUTPUT_CONTROL			CCI_REG16(0xc984)
> +#define MT9M114_CAM_PORT_PORT_SELECT_PARALLEL			(0 << 0)
> +#define MT9M114_CAM_PORT_PORT_SELECT_MIPI			(1 << 0)
> +#define MT9M114_CAM_PORT_CLOCK_SLOWDOWN				BIT(3)
> +#define MT9M114_CAM_PORT_TRUNCATE_RAW_BAYER			BIT(4)
> +#define MT9M114_CAM_PORT_PIXCLK_GATE				BIT(5)
> +#define MT9M114_CAM_PORT_CONT_MIPI_CLK				BIT(6)
> +#define MT9M114_CAM_PORT_CHAN_NUM(vc)				((vc) << 8)
> +#define MT9M114_CAM_PORT_MIPI_TIMING_T_HS_ZERO		CCI_REG16(0xc988)
> +#define MT9M114_CAM_PORT_MIPI_TIMING_T_HS_ZERO_VALUE(n)		((n) << 8)
> +#define MT9M114_CAM_PORT_MIPI_TIMING_T_HS_EXIT_TRAIL	CCI_REG16(0xc98a)
> +#define MT9M114_CAM_PORT_MIPI_TIMING_T_HS_EXIT_VALUE(n)		((n) << 8)
> +#define MT9M114_CAM_PORT_MIPI_TIMING_T_HS_TRAIL_VALUE(n)	((n) << 0)
> +#define MT9M114_CAM_PORT_MIPI_TIMING_T_CLK_POST_PRE	CCI_REG16(0xc98c)
> +#define MT9M114_CAM_PORT_MIPI_TIMING_T_CLK_POST_VALUE(n)	((n) << 8)
> +#define MT9M114_CAM_PORT_MIPI_TIMING_T_CLK_PRE_VALUE(n)		((n) << 0)
> +#define MT9M114_CAM_PORT_MIPI_TIMING_T_CLK_TRAIL_ZERO	CCI_REG16(0xc98e)
> +#define MT9M114_CAM_PORT_MIPI_TIMING_T_CLK_TRAIL_VALUE(n)	((n) << 8)
> +#define MT9M114_CAM_PORT_MIPI_TIMING_T_CLK_ZERO_VALUE(n)	((n) << 0)
> +
> +/* System Manager registers */
> +#define MT9M114_SYSMGR_NEXT_STATE			CCI_REG8(0xdc00)
> +#define MT9M114_SYSMGR_CURRENT_STATE			CCI_REG8(0xdc01)
> +#define MT9M114_SYSMGR_CMD_STATUS			CCI_REG8(0xdc02)
> +
> +/* Patch Loader registers */
> +#define MT9M114_PATCHLDR_LOADER_ADDRESS			CCI_REG16(0xe000)
> +#define MT9M114_PATCHLDR_PATCH_ID			CCI_REG16(0xe002)
> +#define MT9M114_PATCHLDR_FIRMWARE_ID			CCI_REG32(0xe004)
> +#define MT9M114_PATCHLDR_APPLY_STATUS			CCI_REG8(0xe008)
> +#define MT9M114_PATCHLDR_NUM_PATCHES			CCI_REG8(0xe009)
> +#define MT9M114_PATCHLDR_PATCH_ID_0			CCI_REG16(0xe00a)
> +#define MT9M114_PATCHLDR_PATCH_ID_1			CCI_REG16(0xe00c)
> +#define MT9M114_PATCHLDR_PATCH_ID_2			CCI_REG16(0xe00e)
> +#define MT9M114_PATCHLDR_PATCH_ID_3			CCI_REG16(0xe010)
> +#define MT9M114_PATCHLDR_PATCH_ID_4			CCI_REG16(0xe012)
> +#define MT9M114_PATCHLDR_PATCH_ID_5			CCI_REG16(0xe014)
> +#define MT9M114_PATCHLDR_PATCH_ID_6			CCI_REG16(0xe016)
> +#define MT9M114_PATCHLDR_PATCH_ID_7			CCI_REG16(0xe018)
> +
> +/* SYS_STATE values (for SYSMGR_NEXT_STATE and SYSMGR_CURRENT_STATE) */
> +#define MT9M114_SYS_STATE_ENTER_CONFIG_CHANGE		0x28
> +#define MT9M114_SYS_STATE_STREAMING			0x31
> +#define MT9M114_SYS_STATE_START_STREAMING		0x34
> +#define MT9M114_SYS_STATE_ENTER_SUSPEND			0x40
> +#define MT9M114_SYS_STATE_SUSPENDED			0x41
> +#define MT9M114_SYS_STATE_ENTER_STANDBY			0x50
> +#define MT9M114_SYS_STATE_STANDBY			0x52
> +#define MT9M114_SYS_STATE_LEAVE_STANDBY			0x54
> +
> +/* Result status of last SET_STATE comamnd */
> +#define MT9M114_SET_STATE_RESULT_ENOERR			0x00
> +#define MT9M114_SET_STATE_RESULT_EINVAL			0x0c
> +#define MT9M114_SET_STATE_RESULT_ENOSPC			0x0d
> +
> +/*
> + * The minimum amount of horizontal and vertical blanking is undocumented. The
> + * minimum values that have been seen in register lists are 303 and 38, use
> + * them.
> + */
> +#define MT9M114_MIN_HBLANK				303
> +#define MT9M114_MIN_VBLANK				38
> +
> +#define MT9M114_DEF_FRAME_RATE				30
> +#define MT9M114_MAX_FRAME_RATE				120
> +
> +#define MT9M114_PIXEL_ARRAY_WIDTH			1296U
> +#define MT9M114_PIXEL_ARRAY_HEIGHT			976U
> +
> +/*
> + * These values are not well documented and are semi-arbitrary. The pixel array
> + * minimum output size is 8 pixels larger than the minimum scaler cropped input
> + * width to account for the demosaicing.
> + */
> +#define MT9M114_PIXEL_ARRAY_MIN_OUTPUT_WIDTH		(32U + 8U)
> +#define MT9M114_PIXEL_ARRAY_MIN_OUTPUT_HEIGHT		(32U + 8U)
> +#define MT9M114_SCALER_CROPPED_INPUT_WIDTH		32U
> +#define MT9M114_SCALER_CROPPED_INPUT_HEIGHT		32U
> +
> +/* Indices into the mt9m114.ifp.tpg array. */
> +#define MT9M114_TPG_PATTERN				0
> +#define MT9M114_TPG_RED					1
> +#define MT9M114_TPG_GREEN				2
> +#define MT9M114_TPG_BLUE				3
> +
> +/* -----------------------------------------------------------------------------
> + * Data Structures
> + */
> +
> +enum mt9m114_format_flag {
> +	MT9M114_FMT_FLAG_PARALLEL = BIT(0),
> +	MT9M114_FMT_FLAG_CSI2 = BIT(1),
> +};
> +
> +struct mt9m114_format_info {
> +	u32 code;
> +	u32 output_format;
> +	u32 flags;
> +};
> +
> +struct mt9m114 {
> +	struct i2c_client *client;
> +	struct regmap *regmap;
> +
> +	struct clk *clk;
> +	struct gpio_desc *reset;
> +	struct regulator_bulk_data supplies[3];
> +	struct v4l2_fwnode_endpoint bus_cfg;
> +
> +	struct {
> +		unsigned int m;
> +		unsigned int n;
> +		unsigned int p;
> +	} pll;
> +
> +	unsigned int pixrate;
> +	bool streaming;
> +
> +	/* Pixel Array */
> +	struct {
> +		struct v4l2_subdev sd;
> +		struct media_pad pad;
> +
> +		struct v4l2_ctrl_handler hdl;
> +		struct v4l2_ctrl *exposure;
> +		struct v4l2_ctrl *gain;
> +		struct v4l2_ctrl *hblank;
> +		struct v4l2_ctrl *vblank;
> +	} pa;
> +
> +	/* Image Flow Processor */
> +	struct {
> +		struct v4l2_subdev sd;
> +		struct media_pad pads[2];
> +
> +		struct v4l2_ctrl_handler hdl;
> +		unsigned int frame_rate;
> +
> +		struct v4l2_ctrl *tpg[4];
> +	} ifp;
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Formats
> + */
> +
> +static const struct mt9m114_format_info mt9m114_format_infos[] = {
> +	{
> +		/*
> +		 * The first two entries are used as defaults, for parallel and
> +		 * CSI-2 buses respectively. Keep them in that order.
> +		 */
> +		.code = MEDIA_BUS_FMT_UYVY8_2X8,
> +		.flags = MT9M114_FMT_FLAG_PARALLEL,
> +		.output_format = MT9M114_CAM_OUTPUT_FORMAT_FORMAT_YUV,
> +	}, {
> +		.code = MEDIA_BUS_FMT_UYVY8_1X16,
> +		.flags = MT9M114_FMT_FLAG_CSI2,
> +		.output_format = MT9M114_CAM_OUTPUT_FORMAT_FORMAT_YUV,
> +	}, {
> +		.code = MEDIA_BUS_FMT_YUYV8_2X8,
> +		.flags = MT9M114_FMT_FLAG_PARALLEL,
> +		.output_format = MT9M114_CAM_OUTPUT_FORMAT_FORMAT_YUV
> +			       | MT9M114_CAM_OUTPUT_FORMAT_SWAP_BYTES,
> +	}, {
> +		.code = MEDIA_BUS_FMT_YUYV8_1X16,
> +		.flags = MT9M114_FMT_FLAG_CSI2,
> +		.output_format = MT9M114_CAM_OUTPUT_FORMAT_FORMAT_YUV
> +			       | MT9M114_CAM_OUTPUT_FORMAT_SWAP_BYTES,
> +	}, {
> +		.code = MEDIA_BUS_FMT_RGB565_2X8_LE,
> +		.flags = MT9M114_FMT_FLAG_PARALLEL,
> +		.output_format = MT9M114_CAM_OUTPUT_FORMAT_RGB_FORMAT_565RGB
> +			       | MT9M114_CAM_OUTPUT_FORMAT_FORMAT_RGB
> +			       | MT9M114_CAM_OUTPUT_FORMAT_SWAP_BYTES,
> +	}, {
> +		.code = MEDIA_BUS_FMT_RGB565_2X8_BE,
> +		.flags = MT9M114_FMT_FLAG_PARALLEL,
> +		.output_format = MT9M114_CAM_OUTPUT_FORMAT_RGB_FORMAT_565RGB
> +			       | MT9M114_CAM_OUTPUT_FORMAT_FORMAT_RGB,
> +	}, {
> +		.code = MEDIA_BUS_FMT_RGB565_1X16,
> +		.flags = MT9M114_FMT_FLAG_CSI2,
> +		.output_format = MT9M114_CAM_OUTPUT_FORMAT_RGB_FORMAT_565RGB
> +			       | MT9M114_CAM_OUTPUT_FORMAT_FORMAT_RGB,
> +	}, {
> +		.code = MEDIA_BUS_FMT_SGRBG8_1X8,
> +		.output_format = MT9M114_CAM_OUTPUT_FORMAT_BAYER_FORMAT_PROCESSED8
> +			       | MT9M114_CAM_OUTPUT_FORMAT_FORMAT_BAYER,
> +		.flags = MT9M114_FMT_FLAG_PARALLEL | MT9M114_FMT_FLAG_CSI2,
> +	}, {
> +		/* Keep the format compatible with the IFP sink pad last. */
> +		.code = MEDIA_BUS_FMT_SGRBG10_1X10,
> +		.output_format = MT9M114_CAM_OUTPUT_FORMAT_BAYER_FORMAT_RAWR10
> +			| MT9M114_CAM_OUTPUT_FORMAT_FORMAT_BAYER,
> +		.flags = MT9M114_FMT_FLAG_PARALLEL | MT9M114_FMT_FLAG_CSI2,
> +	}
> +};
> +
> +static const struct mt9m114_format_info *
> +mt9m114_default_format_info(struct mt9m114 *sensor)
> +{
> +	if (sensor->bus_cfg.bus_type == V4L2_MBUS_CSI2_DPHY)
> +		return &mt9m114_format_infos[1];
> +	else
> +		return &mt9m114_format_infos[0];
> +}
> +
> +static const struct mt9m114_format_info *
> +mt9m114_format_info(struct mt9m114 *sensor, unsigned int pad, u32 code)
> +{
> +	const unsigned int num_formats = ARRAY_SIZE(mt9m114_format_infos);
> +	unsigned int flag;
> +	unsigned int i;
> +
> +	switch (pad) {
> +	case 0:
> +		return &mt9m114_format_infos[num_formats - 1];
> +
> +	case 1:
> +		if (sensor->bus_cfg.bus_type == V4L2_MBUS_CSI2_DPHY)
> +			flag = MT9M114_FMT_FLAG_CSI2;
> +		else
> +			flag = MT9M114_FMT_FLAG_PARALLEL;
> +
> +		for (i = 0; i < num_formats; ++i) {
> +			const struct mt9m114_format_info *info =
> +				&mt9m114_format_infos[i];
> +
> +			if (info->code == code && info->flags & flag)
> +				return info;
> +		}
> +
> +		return mt9m114_default_format_info(sensor);
> +
> +	default:
> +		return NULL;
> +	}
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Initialization
> + */
> +
> +static const struct cci_reg_sequence mt9m114_init[] = {
> +	{ MT9M114_RESET_REGISTER,			MT9M114_RESET_REGISTER_MASK_BAD |
> +							MT9M114_RESET_REGISTER_LOCK_REG |
> +							0x0010 },
> +

This this seems weirdly indented ?

> +	/* Sensor optimization */
> +	{ CCI_REG16(0x316a), 0x8270 },
> +	{ CCI_REG16(0x316c), 0x8270 },
> +	{ CCI_REG16(0x3ed0), 0x2305 },
> +	{ CCI_REG16(0x3ed2), 0x77cf },
> +	{ CCI_REG16(0x316e), 0x8202 },
> +	{ CCI_REG16(0x3180), 0x87ff },
> +	{ CCI_REG16(0x30d4), 0x6080 },
> +	{ CCI_REG16(0xa802), 0x0008 },
> +
> +	{ CCI_REG16(0x3e14), 0xff39 },
> +
> +	/* APGA */
> +	{ MT9M114_CAM_PGA_PGA_CONTROL,			0x0000 },
> +
> +	/* Automatic White balance */
> +	{ MT9M114_CAM_AWB_CCM_L(0),			0x0267 },
> +	{ MT9M114_CAM_AWB_CCM_L(1),			0xff1a },
> +	{ MT9M114_CAM_AWB_CCM_L(2),			0xffb3 },
> +	{ MT9M114_CAM_AWB_CCM_L(3),			0xff80 },
> +	{ MT9M114_CAM_AWB_CCM_L(4),			0x0166 },
> +	{ MT9M114_CAM_AWB_CCM_L(5),			0x0003 },
> +	{ MT9M114_CAM_AWB_CCM_L(6),			0xff9a },
> +	{ MT9M114_CAM_AWB_CCM_L(7),			0xfeb4 },
> +	{ MT9M114_CAM_AWB_CCM_L(8),			0x024d },
> +	{ MT9M114_CAM_AWB_CCM_M(0),			0x01bf },
> +	{ MT9M114_CAM_AWB_CCM_M(1),			0xff01 },
> +	{ MT9M114_CAM_AWB_CCM_M(2),			0xfff3 },
> +	{ MT9M114_CAM_AWB_CCM_M(3),			0xff75 },
> +	{ MT9M114_CAM_AWB_CCM_M(4),			0x0198 },
> +	{ MT9M114_CAM_AWB_CCM_M(5),			0xfffd },
> +	{ MT9M114_CAM_AWB_CCM_M(6),			0xff9a },
> +	{ MT9M114_CAM_AWB_CCM_M(7),			0xfee7 },
> +	{ MT9M114_CAM_AWB_CCM_M(8),			0x02a8 },
> +	{ MT9M114_CAM_AWB_CCM_R(0),			0x01d9 },
> +	{ MT9M114_CAM_AWB_CCM_R(1),			0xff26 },
> +	{ MT9M114_CAM_AWB_CCM_R(2),			0xfff3 },
> +	{ MT9M114_CAM_AWB_CCM_R(3),			0xffb3 },
> +	{ MT9M114_CAM_AWB_CCM_R(4),			0x0132 },
> +	{ MT9M114_CAM_AWB_CCM_R(5),			0xffe8 },
> +	{ MT9M114_CAM_AWB_CCM_R(6),			0xffda },
> +	{ MT9M114_CAM_AWB_CCM_R(7),			0xfecd },
> +	{ MT9M114_CAM_AWB_CCM_R(8),			0x02c2 },
> +	{ MT9M114_CAM_AWB_CCM_L_RG_GAIN,		0x0075 },
> +	{ MT9M114_CAM_AWB_CCM_L_BG_GAIN,		0x011c },
> +	{ MT9M114_CAM_AWB_CCM_M_RG_GAIN,		0x009a },
> +	{ MT9M114_CAM_AWB_CCM_M_BG_GAIN,		0x0105 },
> +	{ MT9M114_CAM_AWB_CCM_R_RG_GAIN,		0x00a4 },
> +	{ MT9M114_CAM_AWB_CCM_R_BG_GAIN,		0x00ac },
> +	{ MT9M114_CAM_AWB_CCM_L_CTEMP,			0x0a8c },
> +	{ MT9M114_CAM_AWB_CCM_M_CTEMP,			0x0f0a },
> +	{ MT9M114_CAM_AWB_CCM_R_CTEMP,			0x1964 },
> +	{ MT9M114_CAM_AWB_AWB_XSHIFT_PRE_ADJ,		51 },
> +	{ MT9M114_CAM_AWB_AWB_YSHIFT_PRE_ADJ,		60 },
> +	{ MT9M114_CAM_AWB_AWB_XSCALE,			3 },
> +	{ MT9M114_CAM_AWB_AWB_YSCALE,			2 },
> +	{ MT9M114_CAM_AWB_AWB_WEIGHTS(0),		0x0000 },
> +	{ MT9M114_CAM_AWB_AWB_WEIGHTS(1),		0x0000 },
> +	{ MT9M114_CAM_AWB_AWB_WEIGHTS(2),		0x0000 },
> +	{ MT9M114_CAM_AWB_AWB_WEIGHTS(3),		0xe724 },
> +	{ MT9M114_CAM_AWB_AWB_WEIGHTS(4),		0x1583 },
> +	{ MT9M114_CAM_AWB_AWB_WEIGHTS(5),		0x2045 },
> +	{ MT9M114_CAM_AWB_AWB_WEIGHTS(6),		0x03ff },
> +	{ MT9M114_CAM_AWB_AWB_WEIGHTS(7),		0x007c },
> +	{ MT9M114_CAM_AWB_K_R_L,			0x80 },
> +	{ MT9M114_CAM_AWB_K_G_L,			0x80 },
> +	{ MT9M114_CAM_AWB_K_B_L,			0x80 },
> +	{ MT9M114_CAM_AWB_K_R_R,			0x88 },
> +	{ MT9M114_CAM_AWB_K_G_R,			0x80 },
> +	{ MT9M114_CAM_AWB_K_B_R,			0x80 },
> +
> +	/* Low-Light Image Enhancements */
> +	{ MT9M114_CAM_LL_START_BRIGHTNESS,		0x0020 },
> +	{ MT9M114_CAM_LL_STOP_BRIGHTNESS,		0x009a },
> +	{ MT9M114_CAM_LL_START_GAIN_METRIC,		0x0070 },
> +	{ MT9M114_CAM_LL_STOP_GAIN_METRIC,		0x00f3 },
> +	{ MT9M114_CAM_LL_START_CONTRAST_LUMA_PERCENTAGE, 0x20 },
> +	{ MT9M114_CAM_LL_STOP_CONTRAST_LUMA_PERCENTAGE,	0x9a },
> +	{ MT9M114_CAM_LL_START_SATURATION,		0x80 },
> +	{ MT9M114_CAM_LL_END_SATURATION,		0x4b },
> +	{ MT9M114_CAM_LL_START_DESATURATION,		0x00 },
> +	{ MT9M114_CAM_LL_END_DESATURATION,		0xff },
> +	{ MT9M114_CAM_LL_START_DEMOSAICING,		0x3c },
> +	{ MT9M114_CAM_LL_START_AP_GAIN,			0x02 },
> +	{ MT9M114_CAM_LL_START_AP_THRESH,		0x06 },
> +	{ MT9M114_CAM_LL_STOP_DEMOSAICING,		0x64 },
> +	{ MT9M114_CAM_LL_STOP_AP_GAIN,			0x01 },
> +	{ MT9M114_CAM_LL_STOP_AP_THRESH,		0x0c },
> +	{ MT9M114_CAM_LL_START_NR_RED,			0x3c },
> +	{ MT9M114_CAM_LL_START_NR_GREEN,		0x3c },
> +	{ MT9M114_CAM_LL_START_NR_BLUE,			0x3c },
> +	{ MT9M114_CAM_LL_START_NR_THRESH,		0x0f },
> +	{ MT9M114_CAM_LL_STOP_NR_RED,			0x64 },
> +	{ MT9M114_CAM_LL_STOP_NR_GREEN,			0x64 },
> +	{ MT9M114_CAM_LL_STOP_NR_BLUE,			0x64 },
> +	{ MT9M114_CAM_LL_STOP_NR_THRESH,		0x32 },
> +	{ MT9M114_CAM_LL_START_CONTRAST_BM,		0x0020 },
> +	{ MT9M114_CAM_LL_STOP_CONTRAST_BM,		0x009a },
> +	{ MT9M114_CAM_LL_GAMMA,				0x00dc },
> +	{ MT9M114_CAM_LL_START_CONTRAST_GRADIENT,	0x38 },
> +	{ MT9M114_CAM_LL_STOP_CONTRAST_GRADIENT,	0x30 },
> +	{ MT9M114_CAM_LL_START_CONTRAST_LUMA_PERCENTAGE, 0x50 },
> +	{ MT9M114_CAM_LL_STOP_CONTRAST_LUMA_PERCENTAGE,	0x19 },
> +	{ MT9M114_CAM_LL_START_FADE_TO_BLACK_LUMA,	0x0230 },
> +	{ MT9M114_CAM_LL_STOP_FADE_TO_BLACK_LUMA,	0x0010 },
> +	{ MT9M114_CAM_LL_CLUSTER_DC_TH_BM,		0x01cd },
> +	{ MT9M114_CAM_LL_CLUSTER_DC_GATE_PERCENTAGE,	0x05 },
> +	{ MT9M114_CAM_LL_SUMMING_SENSITIVITY_FACTOR,	0x40 },
> +
> +	/* Auto-Exposure */
> +	{ MT9M114_CAM_AET_TARGET_AVERAGE_LUMA_DARK,	0x1b },
> +	{ MT9M114_CAM_AET_AEMODE,			0x00 },
> +	{ MT9M114_CAM_AET_TARGET_GAIN,			0x0080 },
> +	{ MT9M114_CAM_AET_AE_MAX_VIRT_AGAIN,		0x0100 },
> +	{ MT9M114_CAM_AET_BLACK_CLIPPING_TARGET,	0x005a },
> +
> +	{ MT9M114_CCM_DELTA_GAIN,			0x05 },
> +	{ MT9M114_AE_TRACK_AE_TRACKING_DAMPENING_SPEED,	0x20 },
> +
> +	/* Pixel array timings and integration time */
> +	{ MT9M114_CAM_SENSOR_CFG_ROW_SPEED,		1 },
> +	{ MT9M114_CAM_SENSOR_CFG_FINE_INTEG_TIME_MIN,	219 },
> +	{ MT9M114_CAM_SENSOR_CFG_FINE_INTEG_TIME_MAX,	1459 },
> +	{ MT9M114_CAM_SENSOR_CFG_FINE_CORRECTION,	96 },
> +	{ MT9M114_CAM_SENSOR_CFG_REG_0_DATA,		32 },
> +
> +	/* Miscellaneous settings */
> +	{ MT9M114_PAD_SLEW,				0x0777 },
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Hardware Configuration
> + */
> +
> +/* Wait for a command to complete. */
> +static int mt9m114_poll_command(struct mt9m114 *sensor, u32 command)
> +{
> +	unsigned int i;
> +	u64 value;
> +	int ret;
> +
> +	for (i = 0; i < 100; ++i) {
> +		ret = cci_read(sensor->regmap, MT9M114_COMMAND_REGISTER, &value,
> +			       NULL);
> +		if (ret < 0)
> +			return ret;
> +
> +		if (!(value & command))
> +			break;
> +
> +		usleep_range(5000, 6000);
> +	}
> +
> +	if (value & command) {
> +		dev_err(&sensor->client->dev, "Command %u completion timeout\n",
> +			command);
> +		return -ETIMEDOUT;
> +	}
> +
> +	if (!(value & MT9M114_COMMAND_REGISTER_OK)) {
> +		dev_err(&sensor->client->dev, "Command %u failed\n", command);
> +		return -EIO;
> +	}
> +
> +	return 0;
> +}
> +
> +/* Wait for a state to be entered. */
> +static int mt9m114_poll_state(struct mt9m114 *sensor, u32 state)
> +{
> +	unsigned int i;
> +	u64 value;
> +	int ret;
> +
> +	for (i = 0; i < 100; ++i) {
> +		ret = cci_read(sensor->regmap, MT9M114_SYSMGR_CURRENT_STATE,
> +			       &value, NULL);
> +		if (ret < 0)
> +			return ret;
> +
> +		if (value == state)
> +			return 0;
> +
> +		usleep_range(1000, 1500);

Just curious, where do this timeouts and the one in the above function
come from ?

> +	}
> +
> +	dev_err(&sensor->client->dev, "Timeout waiting for state 0x%02x\n",
> +		state);
> +	return -ETIMEDOUT;
> +}
> +
> +static int mt9m114_set_state(struct mt9m114 *sensor, u8 next_state)
> +{
> +	int ret = 0;
> +
> +	/* Set the next desired state and start the state transition. */
> +	cci_write(sensor->regmap, MT9M114_SYSMGR_NEXT_STATE, next_state, &ret);
> +	if (ret < 0)
> +		return ret;

If you pass "ret" to cci_write() do you need to check the return value here ?

> +
> +	cci_write(sensor->regmap, MT9M114_COMMAND_REGISTER,
> +		  MT9M114_COMMAND_REGISTER_OK |
> +		  MT9M114_COMMAND_REGISTER_SET_STATE, &ret);
> +	if (ret < 0)
> +		return ret;
> +
> +	/* Wait for the state transition to complete. */
> +	ret = mt9m114_poll_command(sensor, MT9M114_COMMAND_REGISTER_SET_STATE);
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static int mt9m114_initialize(struct mt9m114 *sensor)
> +{
> +	u32 value;
> +	int ret;
> +
> +	ret = cci_multi_reg_write(sensor->regmap, mt9m114_init,
> +				  ARRAY_SIZE(mt9m114_init), NULL);
> +	if (ret < 0) {
> +		dev_err(&sensor->client->dev,
> +			"Failed to initialize the sensor\n");
> +		return ret;
> +	}
> +
> +	/* Configure the PLL. */
> +	cci_write(sensor->regmap, MT9M114_CAM_SYSCTL_PLL_ENABLE,
> +		  MT9M114_CAM_SYSCTL_PLL_ENABLE_VALUE, &ret);
> +	cci_write(sensor->regmap, MT9M114_CAM_SYSCTL_PLL_DIVIDER_M_N,
> +		  MT9M114_CAM_SYSCTL_PLL_DIVIDER_VALUE(sensor->pll.m,
> +						       sensor->pll.n),
> +		  &ret);

"&ret);" Fits on the previous line

> +	cci_write(sensor->regmap, MT9M114_CAM_SYSCTL_PLL_DIVIDER_P,
> +		  MT9M114_CAM_SYSCTL_PLL_DIVIDER_P_VALUE(sensor->pll.p), &ret);
> +	cci_write(sensor->regmap, MT9M114_CAM_SENSOR_CFG_PIXCLK,
> +		  sensor->pixrate, &ret);
> +
> +	/* Configure the output mode. */
> +	if (sensor->bus_cfg.bus_type == V4L2_MBUS_CSI2_DPHY) {
> +		value = MT9M114_CAM_PORT_PORT_SELECT_MIPI
> +		      | MT9M114_CAM_PORT_CHAN_NUM(0)
> +		      | 0x8000;
> +		if (!(sensor->bus_cfg.bus.mipi_csi2.flags &
> +		      V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK))
> +			value |= MT9M114_CAM_PORT_CONT_MIPI_CLK;
> +	} else {
> +		value = MT9M114_CAM_PORT_PORT_SELECT_PARALLEL
> +		      | 0x8000;
> +	}
> +	cci_write(sensor->regmap, MT9M114_CAM_PORT_OUTPUT_CONTROL, value, &ret);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = mt9m114_set_state(sensor, MT9M114_SYS_STATE_ENTER_CONFIG_CHANGE);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = mt9m114_set_state(sensor, MT9M114_SYS_STATE_ENTER_SUSPEND);
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static int mt9m114_configure(struct mt9m114 *sensor,
> +			     struct v4l2_subdev_state *pa_state,
> +			     struct v4l2_subdev_state *ifp_state)
> +{
> +	const struct v4l2_mbus_framefmt *pa_format;
> +	const struct v4l2_rect *pa_crop;
> +	const struct mt9m114_format_info *ifp_info;
> +	const struct v4l2_mbus_framefmt *ifp_format;
> +	const struct v4l2_rect *ifp_crop;
> +	const struct v4l2_rect *ifp_compose;
> +	unsigned int hratio, vratio;
> +	u64 output_format;
> +	u64 read_mode;
> +	int ret = 0;
> +
> +	pa_format = v4l2_subdev_get_pad_format(&sensor->pa.sd, pa_state, 0);
> +	pa_crop = v4l2_subdev_get_pad_crop(&sensor->pa.sd, pa_state, 0);
> +
> +	ifp_format = v4l2_subdev_get_pad_format(&sensor->ifp.sd, ifp_state, 1);
> +	ifp_info = mt9m114_format_info(sensor, 1, ifp_format->code);
> +	ifp_crop = v4l2_subdev_get_pad_crop(&sensor->ifp.sd, ifp_state, 0);
> +	ifp_compose = v4l2_subdev_get_pad_compose(&sensor->ifp.sd, ifp_state, 0);
> +
> +	ret = cci_read(sensor->regmap, MT9M114_CAM_SENSOR_CONTROL_READ_MODE,
> +		       &read_mode, NULL);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = cci_read(sensor->regmap, MT9M114_CAM_OUTPUT_FORMAT,
> +		       &output_format, NULL);
> +	if (ret < 0)
> +		return ret;
> +
> +	hratio = pa_crop->width / pa_format->width;
> +	vratio = pa_crop->height / pa_format->height;
> +
> +	/*
> +	 * Pixel array crop and binning. The CAM_SENSOR_CFG_CPIPE_LAST_ROW
> +	 * register isn't clearly documented, but is always set to the number
> +	 * of active rows minus 4 divided by the vertical binning factor in all
> +	 * example sensor modes.
> +	 */
> +	cci_write(sensor->regmap, MT9M114_CAM_SENSOR_CFG_X_ADDR_START,
> +		  pa_crop->left, &ret);
> +	cci_write(sensor->regmap, MT9M114_CAM_SENSOR_CFG_Y_ADDR_START,
> +		  pa_crop->top, &ret);
> +	cci_write(sensor->regmap, MT9M114_CAM_SENSOR_CFG_X_ADDR_END,
> +		  pa_crop->width + pa_crop->left - 1, &ret);
> +	cci_write(sensor->regmap, MT9M114_CAM_SENSOR_CFG_Y_ADDR_END,
> +		  pa_crop->height + pa_crop->top - 1, &ret);
> +	cci_write(sensor->regmap, MT9M114_CAM_SENSOR_CFG_CPIPE_LAST_ROW,
> +		  (pa_crop->height - 4) / vratio - 1, &ret);
> +
> +	read_mode &= ~(MT9M114_CAM_SENSOR_CONTROL_X_READ_OUT_MASK |
> +		       MT9M114_CAM_SENSOR_CONTROL_Y_READ_OUT_MASK);
> +
> +	if (hratio > 1)
> +		read_mode |= MT9M114_CAM_SENSOR_CONTROL_X_READ_OUT_SUMMING;
> +	if (vratio > 1)
> +		read_mode |= MT9M114_CAM_SENSOR_CONTROL_Y_READ_OUT_SUMMING;
> +
> +	cci_write(sensor->regmap, MT9M114_CAM_SENSOR_CONTROL_READ_MODE,
> +		  read_mode, &ret);
> +
> +	/*
> +	 * Color pipeline (IFP) cropping and scaling. Subtract 4 from the left
> +	 * and top coordinates to compensate for the lines and columns removed
> +	 * by demosaicing that are taken into account in the crop rectangle but
> +	 * not in the hardware.
> +	 */
> +	cci_write(sensor->regmap, MT9M114_CAM_CROP_WINDOW_XOFFSET,
> +		  ifp_crop->left - 4, &ret);
> +	cci_write(sensor->regmap, MT9M114_CAM_CROP_WINDOW_YOFFSET,
> +		  ifp_crop->top - 4, &ret);
> +	cci_write(sensor->regmap, MT9M114_CAM_CROP_WINDOW_WIDTH,
> +		  ifp_crop->width, &ret);
> +	cci_write(sensor->regmap, MT9M114_CAM_CROP_WINDOW_HEIGHT,
> +		  ifp_crop->height, &ret);
> +
> +	cci_write(sensor->regmap, MT9M114_CAM_OUTPUT_WIDTH,
> +		  ifp_compose->width, &ret);
> +	cci_write(sensor->regmap, MT9M114_CAM_OUTPUT_HEIGHT,
> +		  ifp_compose->height, &ret);
> +
> +	/* AWB and AE windows, use the full frame. */
> +	cci_write(sensor->regmap, MT9M114_CAM_STAT_AWB_CLIP_WINDOW_XSTART,
> +		  0, &ret);
> +	cci_write(sensor->regmap, MT9M114_CAM_STAT_AWB_CLIP_WINDOW_YSTART,
> +		  0, &ret);
> +	cci_write(sensor->regmap, MT9M114_CAM_STAT_AWB_CLIP_WINDOW_XEND,
> +		  ifp_compose->width - 1, &ret);
> +	cci_write(sensor->regmap, MT9M114_CAM_STAT_AWB_CLIP_WINDOW_YEND,
> +		  ifp_compose->height - 1, &ret);
> +
> +	cci_write(sensor->regmap, MT9M114_CAM_STAT_AE_INITIAL_WINDOW_XSTART,
> +		  0, &ret);
> +	cci_write(sensor->regmap, MT9M114_CAM_STAT_AE_INITIAL_WINDOW_YSTART,
> +		  0, &ret);
> +	cci_write(sensor->regmap, MT9M114_CAM_STAT_AE_INITIAL_WINDOW_XEND,
> +		  ifp_compose->width / 5 - 1, &ret);
> +	cci_write(sensor->regmap, MT9M114_CAM_STAT_AE_INITIAL_WINDOW_YEND,
> +		  ifp_compose->height / 5 - 1, &ret);
> +
> +	cci_write(sensor->regmap, MT9M114_CAM_CROP_CROPMODE,
> +		  MT9M114_CAM_CROP_MODE_AWB_AUTO_CROP_EN |
> +		  MT9M114_CAM_CROP_MODE_AE_AUTO_CROP_EN, &ret);
> +
> +	/* Set the media bus code. */
> +	output_format &= ~(MT9M114_CAM_OUTPUT_FORMAT_RGB_FORMAT_MASK |
> +			   MT9M114_CAM_OUTPUT_FORMAT_BAYER_FORMAT_MASK |
> +			   MT9M114_CAM_OUTPUT_FORMAT_FORMAT_MASK |
> +			   MT9M114_CAM_OUTPUT_FORMAT_SWAP_BYTES |
> +			   MT9M114_CAM_OUTPUT_FORMAT_SWAP_RED_BLUE);
> +	output_format |= ifp_info->output_format;
> +
> +	cci_write(sensor->regmap, MT9M114_CAM_OUTPUT_FORMAT,
> +		  output_format, &ret);
> +
> +	return ret;
> +}
> +
> +static int mt9m114_set_frame_rate(struct mt9m114 *sensor)
> +{
> +	u16 frame_rate = sensor->ifp.frame_rate << 8;
> +	int ret = 0;
> +
> +	cci_write(sensor->regmap, MT9M114_CAM_AET_MIN_FRAME_RATE,
> +		  frame_rate, &ret);
> +	cci_write(sensor->regmap, MT9M114_CAM_AET_MAX_FRAME_RATE,
> +		  frame_rate, &ret);
> +
> +	return ret;
> +}
> +
> +static int mt9m114_start_streaming(struct mt9m114 *sensor,
> +				   struct v4l2_subdev_state *pa_state,
> +				   struct v4l2_subdev_state *ifp_state)
> +{
> +	int ret;
> +
> +	ret = pm_runtime_resume_and_get(&sensor->client->dev);
> +	if (ret)
> +		return ret;
> +
> +	ret = mt9m114_configure(sensor, pa_state, ifp_state);
> +	if (ret)
> +		goto error;
> +
> +	ret = mt9m114_set_frame_rate(sensor);
> +	if (ret)
> +		goto error;
> +
> +	ret = __v4l2_ctrl_handler_setup(&sensor->pa.hdl);
> +	if (ret)
> +		goto error;
> +
> +	ret = __v4l2_ctrl_handler_setup(&sensor->ifp.hdl);
> +	if (ret)
> +		goto error;
> +
> +	/*
> +	 * The Change-Config state is transient and moves to the streaming
> +	 * state automatically.
> +	 */
> +	ret = mt9m114_set_state(sensor, MT9M114_SYS_STATE_ENTER_CONFIG_CHANGE);
> +	if (ret)
> +		goto error;
> +
> +	sensor->streaming = true;
> +
> +	return 0;
> +
> +error:
> +	pm_runtime_mark_last_busy(&sensor->client->dev);
> +	pm_runtime_put_autosuspend(&sensor->client->dev);
> +
> +	return ret;
> +}
> +
> +static int mt9m114_stop_streaming(struct mt9m114 *sensor)
> +{
> +	int ret;
> +
> +	sensor->streaming = false;
> +
> +	ret = mt9m114_set_state(sensor, MT9M114_SYS_STATE_ENTER_SUSPEND);
> +
> +	pm_runtime_mark_last_busy(&sensor->client->dev);
> +	pm_runtime_put_autosuspend(&sensor->client->dev);
> +
> +	return ret;
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Common Subdev Operations
> + */
> +
> +static const struct media_entity_operations mt9m114_entity_ops = {
> +	.link_validate = v4l2_subdev_link_validate,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Pixel Array Control Operations
> + */
> +
> +static inline struct mt9m114 *pa_ctrl_to_mt9m114(struct v4l2_ctrl *ctrl)
> +{
> +	return container_of(ctrl->handler, struct mt9m114, pa.hdl);
> +}
> +
> +static int mt9m114_pa_g_ctrl(struct v4l2_ctrl *ctrl)
> +{
> +	struct mt9m114 *sensor = pa_ctrl_to_mt9m114(ctrl);
> +	u64 value;
> +	int ret;
> +
> +	if (!pm_runtime_get_if_in_use(&sensor->client->dev))
> +		return 0;
> +
> +	switch (ctrl->id) {
> +	case V4L2_CID_EXPOSURE:
> +		ret = cci_read(sensor->regmap,
> +			       MT9M114_CAM_SENSOR_CONTROL_COARSE_INTEGRATION_TIME,
> +			       &value, NULL);
> +		if (ret)
> +			break;
> +
> +		ctrl->val = value;
> +		break;
> +
> +	case V4L2_CID_ANALOGUE_GAIN:
> +		ret = cci_read(sensor->regmap,
> +			       MT9M114_CAM_SENSOR_CONTROL_ANALOG_GAIN,
> +			       &value, NULL);
> +		if (ret)
> +			break;
> +
> +		ctrl->val = value;
> +		break;
> +
> +	default:
> +		ret = -EINVAL;
> +		break;
> +	}
> +
> +	pm_runtime_mark_last_busy(&sensor->client->dev);
> +	pm_runtime_put_autosuspend(&sensor->client->dev);
> +
> +	return ret;
> +}
> +
> +static int mt9m114_pa_s_ctrl(struct v4l2_ctrl *ctrl)
> +{
> +	struct mt9m114 *sensor = pa_ctrl_to_mt9m114(ctrl);
> +	const struct v4l2_mbus_framefmt *format;
> +	struct v4l2_subdev_state *state;
> +	int ret = 0;
> +	u64 value;
> +
> +	/* V4L2 controls values are applied only when power is up. */
> +	if (!pm_runtime_get_if_in_use(&sensor->client->dev))
> +		return 0;
> +
> +	state = v4l2_subdev_get_locked_active_state(&sensor->pa.sd);
> +	format = v4l2_subdev_get_pad_format(&sensor->pa.sd, state, 0);
> +
> +	switch (ctrl->id) {
> +	case V4L2_CID_HBLANK:
> +		cci_write(sensor->regmap, MT9M114_CAM_SENSOR_CFG_LINE_LENGTH_PCK,
> +			  ctrl->val + format->width, &ret);
> +		break;
> +
> +	case V4L2_CID_VBLANK:
> +		cci_write(sensor->regmap, MT9M114_CAM_SENSOR_CFG_FRAME_LENGTH_LINES,
> +			  ctrl->val + format->height, &ret);
> +		break;
> +
> +	case V4L2_CID_EXPOSURE:
> +		cci_write(sensor->regmap,
> +			  MT9M114_CAM_SENSOR_CONTROL_COARSE_INTEGRATION_TIME,
> +			  ctrl->val, &ret);
> +		break;
> +
> +	case V4L2_CID_ANALOGUE_GAIN:
> +		/*
> +		 * The CAM_SENSOR_CONTROL_ANALOG_GAIN contains linear analog
> +		 * gain values that are mapped to the GLOBAL_GAIN register
> +		 * values by the sensor firmware.
> +		 */
> +		cci_write(sensor->regmap, MT9M114_CAM_SENSOR_CONTROL_ANALOG_GAIN,
> +			  ctrl->val, &ret);
> +		break;
> +
> +	case V4L2_CID_HFLIP:
> +		ret = cci_read(sensor->regmap, MT9M114_CAM_SENSOR_CONTROL_READ_MODE,
> +			       &value, NULL);
> +		if (ret)
> +			break;
> +
> +		if (ctrl->val)
> +			value |= MT9M114_CAM_SENSOR_CONTROL_HORZ_MIRROR_EN;
> +		else
> +			value &= ~MT9M114_CAM_SENSOR_CONTROL_HORZ_MIRROR_EN;
> +		cci_write(sensor->regmap, MT9M114_CAM_SENSOR_CONTROL_READ_MODE,
> +			  value, &ret);

would cci_update_bits() work ?

> +		break;
> +
> +	case V4L2_CID_VFLIP:
> +		ret = cci_read(sensor->regmap, MT9M114_CAM_SENSOR_CONTROL_READ_MODE,
> +			       &value, NULL);
> +		if (ret)
> +			break;
> +
> +		if (ctrl->val)
> +			value |= MT9M114_CAM_SENSOR_CONTROL_VERT_FLIP_EN;
> +		else
> +			value &= ~MT9M114_CAM_SENSOR_CONTROL_VERT_FLIP_EN;
> +		cci_write(sensor->regmap, MT9M114_CAM_SENSOR_CONTROL_READ_MODE,
> +			  value, &ret);
> +		break;
> +
> +	default:
> +		ret = -EINVAL;
> +		break;
> +	}
> +
> +	pm_runtime_mark_last_busy(&sensor->client->dev);
> +	pm_runtime_put_autosuspend(&sensor->client->dev);
> +
> +	return ret;
> +}
> +
> +static const struct v4l2_ctrl_ops mt9m114_pa_ctrl_ops = {
> +	.g_volatile_ctrl = mt9m114_pa_g_ctrl,
> +	.s_ctrl = mt9m114_pa_s_ctrl,
> +};
> +
> +static void mt9m114_pa_ctrl_update_exposure(struct mt9m114 *sensor, bool manual)
> +{
> +	/*
> +	 * Update the volatile flag on the manual exposure and gain controls.
> +	 * If the controls have switched to manual, read their current value
> +	 * from the hardware to ensure that control read and write operations
> +	 * will behave correctly
> +	 */
> +	if (manual) {
> +		mt9m114_pa_g_ctrl(sensor->pa.exposure);
> +		sensor->pa.exposure->cur.val = sensor->pa.exposure->val;
> +		sensor->pa.exposure->flags &= ~V4L2_CTRL_FLAG_VOLATILE;
> +
> +		mt9m114_pa_g_ctrl(sensor->pa.gain);
> +		sensor->pa.gain->cur.val = sensor->pa.gain->val;
> +		sensor->pa.gain->flags &= ~V4L2_CTRL_FLAG_VOLATILE;
> +	} else {
> +		sensor->pa.exposure->flags |= V4L2_CTRL_FLAG_VOLATILE;
> +		sensor->pa.gain->flags |= V4L2_CTRL_FLAG_VOLATILE;
> +	}
> +}
> +
> +static void mt9m114_pa_ctrl_update_blanking(struct mt9m114 *sensor,
> +					    struct v4l2_mbus_framefmt *format)
> +{
> +	/* Update the blanking controls ranges based on the output size. */
> +	__v4l2_ctrl_modify_range(sensor->pa.hblank, MT9M114_MIN_HBLANK,
> +				 8191 - format->width, 1, 323);
> +	__v4l2_ctrl_modify_range(sensor->pa.vblank, MT9M114_MIN_VBLANK,
> +				 65535 - format->height, 1, 39);

magic numbers used in both the control initialization and here..

> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Pixel Array Subdev Operations
> + */
> +
> +static inline struct mt9m114 *pa_to_mt9m114(struct v4l2_subdev *sd)
> +{
> +	return container_of(sd, struct mt9m114, pa.sd);
> +}
> +
> +static int mt9m114_pa_init_cfg(struct v4l2_subdev *sd,
> +			       struct v4l2_subdev_state *state)
> +{
> +	struct v4l2_mbus_framefmt *format;
> +	struct v4l2_rect *crop;
> +
> +	crop = v4l2_subdev_get_pad_crop(sd, state, 0);
> +
> +	crop->left = 0;
> +	crop->top = 0;
> +	crop->width = MT9M114_PIXEL_ARRAY_WIDTH;
> +	crop->height = MT9M114_PIXEL_ARRAY_HEIGHT;
> +
> +	format = v4l2_subdev_get_pad_format(sd, state, 0);
> +	memset(format, 0, sizeof(*format));
> +
> +	format->width = MT9M114_PIXEL_ARRAY_WIDTH;
> +	format->height = MT9M114_PIXEL_ARRAY_HEIGHT;
> +	format->code = MEDIA_BUS_FMT_SGRBG10_1X10;
> +	format->field = V4L2_FIELD_NONE;
> +	format->colorspace = V4L2_COLORSPACE_SRGB;

colorspace RAW ?

> +	format->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> +	format->quantization = V4L2_QUANTIZATION_DEFAULT;
> +	format->xfer_func = V4L2_XFER_FUNC_DEFAULT;

if I'm not mistaken in the latest imx219 updates, for RAW formats

	fmt->colorspace = V4L2_COLORSPACE_RAW;
	fmt->ycbcr_enc = V4L2_YCBCR_ENC_601;
	fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE;
	fmt->xfer_func = V4L2_XFER_FUNC_NONE;

which one is correct ?

> +
> +	return 0;
> +}
> +
> +static int mt9m114_pa_enum_mbus_code(struct v4l2_subdev *sd,
> +				     struct v4l2_subdev_state *state,
> +				     struct v4l2_subdev_mbus_code_enum *code)
> +{
> +	if (code->index > 0)
> +		return -EINVAL;
> +
> +	code->code = MEDIA_BUS_FMT_SGRBG10_1X10;
> +
> +	return 0;
> +}
> +
> +static int mt9m114_pa_enum_framesizes(struct v4l2_subdev *sd,
> +				      struct v4l2_subdev_state *state,
> +				      struct v4l2_subdev_frame_size_enum *fse)
> +{
> +	if (fse->index > 1)
> +		return -EINVAL;
> +
> +	if (fse->code != MEDIA_BUS_FMT_SGRBG10_1X10)

It seems flips are registered on the pa subdev. Does flipping change
the bayer ordering ?

> +		return -EINVAL;
> +
> +	/* Report binning capability through frame size enumeration. */
> +	fse->min_width = MT9M114_PIXEL_ARRAY_WIDTH / (fse->index + 1);
> +	fse->max_width = MT9M114_PIXEL_ARRAY_WIDTH / (fse->index + 1);
> +	fse->min_height = MT9M114_PIXEL_ARRAY_HEIGHT / (fse->index + 1);
> +	fse->max_height = MT9M114_PIXEL_ARRAY_HEIGHT / (fse->index + 1);
> +
> +	return 0;
> +}
> +
> +static int mt9m114_pa_set_fmt(struct v4l2_subdev *sd,
> +			      struct v4l2_subdev_state *state,
> +			      struct v4l2_subdev_format *fmt)
> +{
> +	struct mt9m114 *sensor = pa_to_mt9m114(sd);
> +	struct v4l2_mbus_framefmt *format;
> +	struct v4l2_rect *crop;
> +	unsigned int hscale;
> +	unsigned int vscale;
> +
> +	crop = v4l2_subdev_get_pad_crop(sd, state, fmt->pad);
> +	format = v4l2_subdev_get_pad_format(sd, state, fmt->pad);
> +
> +	/* The sensor can bin horizontally and vertically. */
> +	hscale = DIV_ROUND_CLOSEST(crop->width, fmt->format.width ? : 1);
> +	vscale = DIV_ROUND_CLOSEST(crop->height, fmt->format.height ? : 1);

I have a bit of troubles parsing this. Can fmt->format.width/height be
0 ?

> +	format->width = crop->width / clamp(hscale, 1U, 2U);
> +	format->height = crop->height / clamp(vscale, 1U, 2U);
> +
> +	fmt->format = *format;
> +
> +	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
> +		mt9m114_pa_ctrl_update_blanking(sensor, format);
> +
> +	return 0;
> +}
> +
> +static int mt9m114_pa_get_selection(struct v4l2_subdev *sd,
> +				    struct v4l2_subdev_state *state,
> +				    struct v4l2_subdev_selection *sel)
> +{
> +	const struct v4l2_rect *crop;
> +
> +	switch (sel->target) {
> +	case V4L2_SEL_TGT_CROP:
> +		crop = v4l2_subdev_get_pad_crop(sd, state, sel->pad);
> +		sel->r = *crop;

Or:
                set->r = *v4l2_subdev_get_pad_crop(sd, state, sel->pad);

> +		return 0;
> +
> +	case V4L2_SEL_TGT_CROP_DEFAULT:
> +	case V4L2_SEL_TGT_CROP_BOUNDS:
> +	case V4L2_SEL_TGT_NATIVE_SIZE:
> +		sel->r.left = 0;
> +		sel->r.top = 0;
> +		sel->r.width = MT9M114_PIXEL_ARRAY_WIDTH;
> +		sel->r.height = MT9M114_PIXEL_ARRAY_HEIGHT;
> +		return 0;
> +
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int mt9m114_pa_set_selection(struct v4l2_subdev *sd,
> +				    struct v4l2_subdev_state *state,
> +				    struct v4l2_subdev_selection *sel)
> +{
> +	struct mt9m114 *sensor = pa_to_mt9m114(sd);
> +	struct v4l2_mbus_framefmt *format;
> +	struct v4l2_rect *crop;
> +
> +	if (sel->target != V4L2_SEL_TGT_CROP)
> +		return -EINVAL;
> +
> +	crop = v4l2_subdev_get_pad_crop(sd, state, sel->pad);
> +	format = v4l2_subdev_get_pad_format(sd, state, sel->pad);
> +
> +	/*
> +	 * Clamp the crop rectangle. The vertical coordinates must be even, and
> +	 * the horizontal coordinates must be a multiple of 4.
> +	 *
> +	 * FIXME: The horizontal coordinates must be a multiple of 8 when
> +	 * binning, but binning is configured after setting the selection, so
> +	 * we can't know tell here if it will be used.
> +	 */
> +	crop->left = ALIGN(sel->r.left, 4);
> +	crop->top = ALIGN(sel->r.top, 2);
> +	crop->width = clamp_t(unsigned int, ALIGN(sel->r.width, 4),
> +			      MT9M114_PIXEL_ARRAY_MIN_OUTPUT_WIDTH,
> +			      MT9M114_PIXEL_ARRAY_WIDTH - crop->left);
> +	crop->height = clamp_t(unsigned int, ALIGN(sel->r.height, 2),
> +			       MT9M114_PIXEL_ARRAY_MIN_OUTPUT_HEIGHT,
> +			       MT9M114_PIXEL_ARRAY_HEIGHT - crop->top);
> +
> +	sel->r = *crop;
> +
> +	/* Reset the format. */
> +	format->width = crop->width;
> +	format->height = crop->height;
> +
> +	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE)
> +		mt9m114_pa_ctrl_update_blanking(sensor, format);
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_subdev_pad_ops mt9m114_pa_pad_ops = {
> +	.init_cfg = mt9m114_pa_init_cfg,
> +	.enum_mbus_code = mt9m114_pa_enum_mbus_code,
> +	.enum_frame_size = mt9m114_pa_enum_framesizes,
> +	.get_fmt = v4l2_subdev_get_fmt,
> +	.set_fmt = mt9m114_pa_set_fmt,
> +	.get_selection = mt9m114_pa_get_selection,
> +	.set_selection = mt9m114_pa_set_selection,
> +};
> +
> +static const struct v4l2_subdev_ops mt9m114_pa_ops = {
> +	.pad = &mt9m114_pa_pad_ops,
> +};
> +
> +static int mt9m114_pa_init(struct mt9m114 *sensor)
> +{
> +	struct v4l2_ctrl_handler *hdl = &sensor->pa.hdl;
> +	struct v4l2_subdev *sd = &sensor->pa.sd;
> +	struct media_pad *pads = &sensor->pa.pad;
> +	unsigned int max_exposure;
> +	int ret;
> +
> +	/* Initialize the subdev. */
> +	v4l2_subdev_init(sd, &mt9m114_pa_ops);
> +	v4l2_i2c_subdev_set_name(sd, sensor->client, NULL, " pixel array");
> +
> +	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +	sd->owner = THIS_MODULE;
> +	sd->dev = &sensor->client->dev;
> +	v4l2_set_subdevdata(sd, sensor->client);
> +
> +	/* Initialize the media entity. */
> +	sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
> +	sd->entity.ops = &mt9m114_entity_ops;
> +	pads[0].flags = MEDIA_PAD_FL_SOURCE;
> +	ret = media_entity_pads_init(&sd->entity, 1, pads);
> +	if (ret < 0)
> +		return ret;
> +
> +	/* Initialize the control handler. */
> +	v4l2_ctrl_handler_init(hdl, 7);
> +
> +	/* Set the default to achieve 1280x960 at 30fps. */
> +	sensor->pa.hblank =
> +		v4l2_ctrl_new_std(hdl, &mt9m114_pa_ctrl_ops, V4L2_CID_HBLANK,
> +				  MT9M114_MIN_HBLANK,
> +				  8191 - MT9M114_PIXEL_ARRAY_WIDTH, 1, 323);
> +	sensor->pa.vblank =
> +		v4l2_ctrl_new_std(hdl, &mt9m114_pa_ctrl_ops, V4L2_CID_VBLANK,
> +				  MT9M114_MIN_VBLANK,
> +				  65535 - MT9M114_PIXEL_ARRAY_HEIGHT, 1, 39);
> +
> +	/*
> +	 * The maximum coarse integration time is the frame length in lines
> +	 * minus two. The default is taken directly from the datasheet, but
> +	 * makes little sense as auto-exposure is enabled by default.
> +	 */
> +	max_exposure = MT9M114_PIXEL_ARRAY_HEIGHT + MT9M114_MIN_VBLANK - 2;
> +	sensor->pa.exposure =
> +		v4l2_ctrl_new_std(hdl, &mt9m114_pa_ctrl_ops, V4L2_CID_EXPOSURE,
> +				  1, max_exposure, 1, 16);
> +	if (sensor->pa.exposure)
> +		sensor->pa.exposure->flags |= V4L2_CTRL_FLAG_VOLATILE;
> +
> +	sensor->pa.gain =
> +		v4l2_ctrl_new_std(hdl, &mt9m114_pa_ctrl_ops,
> +				  V4L2_CID_ANALOGUE_GAIN,
> +				  1, 511, 1, 32);
> +	if (sensor->pa.gain)
> +		sensor->pa.gain->flags |= V4L2_CTRL_FLAG_VOLATILE;
> +
> +	v4l2_ctrl_new_std(hdl, &mt9m114_pa_ctrl_ops,
> +			  V4L2_CID_PIXEL_RATE,
> +			  sensor->pixrate, sensor->pixrate, 1,
> +			  sensor->pixrate);
> +
> +	v4l2_ctrl_new_std(hdl, &mt9m114_pa_ctrl_ops,
> +			  V4L2_CID_HFLIP,
> +			  0, 1, 1, 0);
> +	v4l2_ctrl_new_std(hdl, &mt9m114_pa_ctrl_ops,
> +			  V4L2_CID_VFLIP,
> +			  0, 1, 1, 0);
> +
> +	if (hdl->error) {
> +		ret = hdl->error;
> +		goto error;
> +	}
> +
> +	sd->state_lock = hdl->lock;
> +
> +	ret = v4l2_subdev_init_finalize(sd);
> +	if (ret)
> +		goto error;
> +
> +	sd->ctrl_handler = hdl;
> +
> +	return 0;
> +
> +error:
> +	v4l2_ctrl_handler_free(&sensor->pa.hdl);
> +	media_entity_cleanup(&sensor->pa.sd.entity);
> +	return ret;
> +}
> +
> +static void mt9m114_pa_cleanup(struct mt9m114 *sensor)
> +{
> +	v4l2_ctrl_handler_free(&sensor->pa.hdl);
> +	media_entity_cleanup(&sensor->pa.sd.entity);
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Image Flow Processor Control Operations
> + */
> +
> +static const char * const mt9m114_test_pattern_menu[] = {
> +	"Disabled",
> +	"Solid Color",
> +	"100% Color Bars",
> +	"Pseudo-Random",
> +	"Fade-to-Gray Color Bars",
> +	"Walking Ones 10-bit",
> +	"Walking Ones 8-bit",
> +};
> +
> +/* Keep in sync with mt9m114_test_pattern_menu */
> +static const unsigned int mt9m114_test_pattern_value[] = {
> +	MT9M114_CAM_MODE_TEST_PATTERN_SELECT_SOLID,
> +	MT9M114_CAM_MODE_TEST_PATTERN_SELECT_SOLID_BARS,
> +	MT9M114_CAM_MODE_TEST_PATTERN_SELECT_RANDOM,
> +	MT9M114_CAM_MODE_TEST_PATTERN_SELECT_FADING_BARS,
> +	MT9M114_CAM_MODE_TEST_PATTERN_SELECT_WALKING_1S_10B,
> +	MT9M114_CAM_MODE_TEST_PATTERN_SELECT_WALKING_1S_8B,
> +};
> +
> +static inline struct mt9m114 *ifp_ctrl_to_mt9m114(struct v4l2_ctrl *ctrl)
> +{
> +	return container_of(ctrl->handler, struct mt9m114, ifp.hdl);
> +}
> +
> +static int mt9m114_ifp_s_ctrl(struct v4l2_ctrl *ctrl)
> +{
> +	struct mt9m114 *sensor = ifp_ctrl_to_mt9m114(ctrl);
> +	u32 value;
> +	int ret = 0;
> +
> +	if (ctrl->id == V4L2_CID_EXPOSURE_AUTO)
> +		mt9m114_pa_ctrl_update_exposure(sensor,
> +						ctrl->val != V4L2_EXPOSURE_AUTO);
> +
> +	/* V4L2 controls values are applied only when power is up. */
> +	if (!pm_runtime_get_if_in_use(&sensor->client->dev))
> +		return 0;
> +
> +	switch (ctrl->id) {
> +	case V4L2_CID_AUTO_WHITE_BALANCE:
> +		/* Control both the AWB mode and the CCM algorithm. */
> +		if (ctrl->val)
> +			value = MT9M114_CAM_AWB_MODE_AUTO
> +			      | MT9M114_CAM_AWB_MODE_EXCLUSIVE_AE;
> +		else
> +			value = 0;
> +
> +		cci_write(sensor->regmap, MT9M114_CAM_AWB_AWBMODE, value, &ret);
> +
> +		if (ctrl->val)
> +			value = MT9M114_CCM_EXEC_CALC_CCM_MATRIX | 0x22;
> +		else
> +			value = 0;
> +
> +		cci_write(sensor->regmap, MT9M114_CCM_ALGO, value, &ret);
> +		break;
> +
> +	case V4L2_CID_EXPOSURE_AUTO:
> +		if (ctrl->val == V4L2_EXPOSURE_AUTO)
> +			value = MT9M114_AE_TRACK_EXEC_AUTOMATIC_EXPOSURE
> +			      | 0x00fe;
> +		else
> +			value = 0;
> +
> +		cci_write(sensor->regmap, MT9M114_AE_TRACK_ALGO, value, &ret);
> +		if (ret)
> +			break;
> +
> +		break;
> +
> +	case V4L2_CID_TEST_PATTERN:
> +	case V4L2_CID_TEST_PATTERN_RED:
> +	case V4L2_CID_TEST_PATTERN_GREENR:
> +	case V4L2_CID_TEST_PATTERN_BLUE: {
> +		unsigned int pattern = sensor->ifp.tpg[MT9M114_TPG_PATTERN]->val;
> +
> +		if (pattern) {
> +			cci_write(sensor->regmap, MT9M114_CAM_MODE_SELECT,
> +				  MT9M114_CAM_MODE_SELECT_TEST_PATTERN, &ret);
> +			cci_write(sensor->regmap,
> +				  MT9M114_CAM_MODE_TEST_PATTERN_SELECT,
> +				  mt9m114_test_pattern_value[pattern - 1], &ret);
> +			cci_write(sensor->regmap,
> +				  MT9M114_CAM_MODE_TEST_PATTERN_RED,
> +				  sensor->ifp.tpg[MT9M114_TPG_RED]->val, &ret);
> +			cci_write(sensor->regmap,
> +				  MT9M114_CAM_MODE_TEST_PATTERN_GREEN,
> +				  sensor->ifp.tpg[MT9M114_TPG_GREEN]->val, &ret);
> +			cci_write(sensor->regmap,
> +				  MT9M114_CAM_MODE_TEST_PATTERN_BLUE,
> +				  sensor->ifp.tpg[MT9M114_TPG_BLUE]->val, &ret);
> +		} else {
> +			cci_write(sensor->regmap, MT9M114_CAM_MODE_SELECT,
> +				  MT9M114_CAM_MODE_SELECT_NORMAL, &ret);
> +		}
> +
> +		/*
> +		 * A Config-Change needs to be issued for the change to take
> +		 * effect. If we're not streaming ignore this, the change will
> +		 * be applied when the stream is started.
> +		 */
> +		if (ret || !sensor->streaming)
> +			break;
> +
> +		ret = mt9m114_set_state(sensor,
> +					MT9M114_SYS_STATE_ENTER_CONFIG_CHANGE);
> +		break;
> +	}
> +
> +	default:
> +		ret = -EINVAL;
> +		break;
> +	}
> +
> +	pm_runtime_mark_last_busy(&sensor->client->dev);
> +	pm_runtime_put_autosuspend(&sensor->client->dev);
> +
> +	return ret;
> +}
> +
> +static const struct v4l2_ctrl_ops mt9m114_ifp_ctrl_ops = {
> +	.s_ctrl = mt9m114_ifp_s_ctrl,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Image Flow Processor Subdev Operations
> + */
> +
> +static inline struct mt9m114 *ifp_to_mt9m114(struct v4l2_subdev *sd)
> +{
> +	return container_of(sd, struct mt9m114, ifp.sd);
> +}
> +
> +static int mt9m114_ifp_s_stream(struct v4l2_subdev *sd, int enable)
> +{
> +	struct mt9m114 *sensor = ifp_to_mt9m114(sd);
> +	struct v4l2_subdev_state *pa_state;
> +	struct v4l2_subdev_state *ifp_state;
> +	int ret;
> +
> +	if (!enable)
> +		return mt9m114_stop_streaming(sensor);

Shouldn't "stop_streaming" happen after the state has been locked to
prevent possible races ?

> +
> +	ifp_state = v4l2_subdev_lock_and_get_active_state(&sensor->ifp.sd);
> +	pa_state = v4l2_subdev_lock_and_get_active_state(&sensor->pa.sd);
> +
> +	ret = mt9m114_start_streaming(sensor, pa_state, ifp_state);
> +
> +	v4l2_subdev_unlock_state(pa_state);
> +	v4l2_subdev_unlock_state(ifp_state);
> +
> +	return ret;
> +}
> +
> +static int mt9m114_ifp_g_frame_interval(struct v4l2_subdev *sd,
> +					struct v4l2_subdev_frame_interval *interval)
> +{
> +	struct v4l2_fract *ival = &interval->interval;
> +	struct mt9m114 *sensor = ifp_to_mt9m114(sd);
> +
> +	mutex_lock(sensor->ifp.hdl.lock);
> +
> +	ival->numerator = 1;
> +	ival->denominator = sensor->ifp.frame_rate;
> +
> +	mutex_unlock(sensor->ifp.hdl.lock);
> +
> +	return 0;
> +}
> +
> +static int mt9m114_ifp_s_frame_interval(struct v4l2_subdev *sd,
> +					struct v4l2_subdev_frame_interval *interval)
> +{
> +	struct v4l2_fract *ival = &interval->interval;
> +	struct mt9m114 *sensor = ifp_to_mt9m114(sd);
> +	int ret = 0;
> +
> +	mutex_lock(sensor->ifp.hdl.lock);
> +
> +	if (ival->numerator != 0 && ival->denominator != 0)
> +		sensor->ifp.frame_rate = min_t(unsigned int,
> +					       ival->denominator / ival->numerator,
> +					       MT9M114_MAX_FRAME_RATE);
> +	else
> +		sensor->ifp.frame_rate = MT9M114_MAX_FRAME_RATE;
> +
> +	ival->numerator = 1;
> +	ival->denominator = sensor->ifp.frame_rate;
> +
> +	if (sensor->streaming)
> +		ret = mt9m114_set_frame_rate(sensor);
> +
> +	mutex_unlock(sensor->ifp.hdl.lock);
> +
> +	return ret;
> +}
> +
> +static int mt9m114_ifp_init_cfg(struct v4l2_subdev *sd,
> +				struct v4l2_subdev_state *state)
> +{
> +	struct mt9m114 *sensor = ifp_to_mt9m114(sd);
> +	struct v4l2_mbus_framefmt *format;
> +	struct v4l2_rect *crop;
> +	struct v4l2_rect *compose;
> +
> +	format = v4l2_subdev_get_pad_format(sd, state, 0);
> +	memset(format, 0, sizeof(*format));
> +
> +	format->width = MT9M114_PIXEL_ARRAY_WIDTH;
> +	format->height = MT9M114_PIXEL_ARRAY_HEIGHT;
> +	format->code = MEDIA_BUS_FMT_SGRBG10_1X10;
> +	format->field = V4L2_FIELD_NONE;
> +	format->colorspace = V4L2_COLORSPACE_SRGB;
> +	format->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> +	format->quantization = V4L2_QUANTIZATION_DEFAULT;
> +	format->xfer_func = V4L2_XFER_FUNC_DEFAULT;

Same question as above

> +
> +	crop = v4l2_subdev_get_pad_crop(sd, state, 0);
> +
> +	crop->left = 4;
> +	crop->top = 4;
> +	crop->width = format->width - 8;
> +	crop->height = format->height - 8;
> +
> +	compose = v4l2_subdev_get_pad_compose(sd, state, 0);
> +
> +	compose->left = 0;
> +	compose->top = 0;
> +	compose->width = crop->width;
> +	compose->height = crop->height;
> +
> +	format = v4l2_subdev_get_pad_format(sd, state, 1);
> +	memset(format, 0, sizeof(*format));
> +
> +	format->width = compose->width;
> +	format->height = compose->height;
> +	format->code = mt9m114_default_format_info(sensor)->code;
> +	format->field = V4L2_FIELD_NONE;
> +	format->colorspace = V4L2_COLORSPACE_SRGB;
> +	format->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> +	format->quantization = V4L2_QUANTIZATION_DEFAULT;
> +	format->xfer_func = V4L2_XFER_FUNC_DEFAULT;
> +
> +	return 0;
> +}
> +
> +static int mt9m114_ifp_enum_mbus_code(struct v4l2_subdev *sd,
> +				      struct v4l2_subdev_state *state,
> +				      struct v4l2_subdev_mbus_code_enum *code)
> +{
> +	const unsigned int num_formats = ARRAY_SIZE(mt9m114_format_infos);
> +	struct mt9m114 *sensor = ifp_to_mt9m114(sd);
> +	unsigned int index = 0;
> +	unsigned int flag;
> +	unsigned int i;
> +
> +	switch (code->pad) {
> +	case 0:
> +		if (code->index != 0)
> +			return -EINVAL;
> +
> +		code->code = mt9m114_format_infos[num_formats - 1].code;
> +		return 0;
> +
> +	case 1:
> +		if (sensor->bus_cfg.bus_type == V4L2_MBUS_CSI2_DPHY)
> +			flag = MT9M114_FMT_FLAG_CSI2;
> +		else
> +			flag = MT9M114_FMT_FLAG_PARALLEL;
> +
> +		for (i = 0; i < num_formats; ++i) {
> +			const struct mt9m114_format_info *info =
> +				&mt9m114_format_infos[i];
> +
> +			if (info->flags & flag) {
> +				if (index == code->index) {
> +					code->code = info->code;
> +					return 0;
> +				}
> +
> +				index++;
> +			}
> +		}
> +
> +		return -EINVAL;
> +
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int mt9m114_ifp_enum_framesizes(struct v4l2_subdev *sd,
> +				       struct v4l2_subdev_state *state,
> +				       struct v4l2_subdev_frame_size_enum *fse)
> +{
> +	struct mt9m114 *sensor = ifp_to_mt9m114(sd);
> +	const struct mt9m114_format_info *info;
> +
> +	if (fse->index > 0)
> +		return -EINVAL;
> +
> +	info = mt9m114_format_info(sensor, fse->pad, fse->code);
> +	if (!info || info->code != fse->code)
> +		return -EINVAL;
> +
> +	if (fse->pad == 0) {
> +		fse->min_width = MT9M114_PIXEL_ARRAY_MIN_OUTPUT_WIDTH;
> +		fse->max_width = MT9M114_PIXEL_ARRAY_WIDTH;
> +		fse->min_height = MT9M114_PIXEL_ARRAY_MIN_OUTPUT_HEIGHT;
> +		fse->max_height = MT9M114_PIXEL_ARRAY_HEIGHT;
> +	} else {
> +		const struct v4l2_rect *crop;
> +
> +		crop = v4l2_subdev_get_pad_crop(sd, state, 0);
> +
> +		fse->max_width = crop->width;
> +		fse->max_height = crop->height;
> +
> +		fse->min_width = fse->max_width / 4;
> +		fse->min_height = fse->max_height / 4;
> +	}
> +
> +	return 0;
> +}
> +
> +static int mt9m114_ifp_enum_frameintervals(struct v4l2_subdev *sd,
> +					   struct v4l2_subdev_state *state,
> +					   struct v4l2_subdev_frame_interval_enum *fie)
> +{
> +	struct mt9m114 *sensor = ifp_to_mt9m114(sd);
> +	const struct mt9m114_format_info *info;
> +
> +	if (fie->index > 0)
> +		return -EINVAL;
> +
> +	info = mt9m114_format_info(sensor, fie->pad, fie->code);
> +	if (!info || info->code != fie->code)
> +		return -EINVAL;
> +
> +	fie->interval.numerator = 1;
> +	fie->interval.denominator = MT9M114_MAX_FRAME_RATE;
> +
> +	return 0;
> +}
> +
> +static int mt9m114_ifp_set_fmt(struct v4l2_subdev *sd,
> +			       struct v4l2_subdev_state *state,
> +			       struct v4l2_subdev_format *fmt)
> +{
> +	struct mt9m114 *sensor = ifp_to_mt9m114(sd);
> +	struct v4l2_mbus_framefmt *format;
> +
> +	format = v4l2_subdev_get_pad_format(sd, state, fmt->pad);
> +
> +	if (fmt->pad == 0) {
> +		/* Only the size can be changed on the sink pad. */
> +		format->width = clamp(ALIGN(fmt->format.width, 8),
> +				      MT9M114_PIXEL_ARRAY_MIN_OUTPUT_WIDTH,
> +				      MT9M114_PIXEL_ARRAY_WIDTH);
> +		format->height = clamp(ALIGN(fmt->format.height, 8),
> +				       MT9M114_PIXEL_ARRAY_MIN_OUTPUT_HEIGHT,
> +				       MT9M114_PIXEL_ARRAY_HEIGHT);
> +	} else {
> +		const struct mt9m114_format_info *info;
> +
> +		/* Only the media bus code can be changed on the source pad. */
> +		info = mt9m114_format_info(sensor, 1, fmt->format.code);
> +
> +		format->code = info->code;
> +
> +		/* If the output format is RAW10, bypass the scaler. */
> +		if (format->code == MEDIA_BUS_FMT_SGRBG10_1X10)
> +			*format = *v4l2_subdev_get_pad_format(sd, state, 0);
> +	}
> +
> +	fmt->format = *format;
> +
> +	return 0;
> +}
> +
> +static int mt9m114_ifp_get_selection(struct v4l2_subdev *sd,
> +				     struct v4l2_subdev_state *state,
> +				     struct v4l2_subdev_selection *sel)
> +{
> +	const struct v4l2_mbus_framefmt *format;
> +	const struct v4l2_rect *crop;
> +	int ret = 0;
> +
> +	/* Crop and compose are only supported on the sink pad. */
> +	if (sel->pad != 0)
> +		return -EINVAL;
> +
> +	switch (sel->target) {
> +	case V4L2_SEL_TGT_CROP:
> +		sel->r = *v4l2_subdev_get_pad_crop(sd, state, 0);
> +		break;
> +
> +	case V4L2_SEL_TGT_CROP_DEFAULT:
> +	case V4L2_SEL_TGT_CROP_BOUNDS:
> +		/*
> +		 * The crop default and bounds are equal to the sink
> +		 * format size minus 4 pixels on each side for demosaicing.
> +		 */
> +		format = v4l2_subdev_get_pad_format(sd, state, 0);
> +
> +		sel->r.left = 4;
> +		sel->r.top = 4;
> +		sel->r.width = format->width - 8;
> +		sel->r.height = format->height - 8;
> +		break;
> +
> +	case V4L2_SEL_TGT_COMPOSE:
> +		sel->r = *v4l2_subdev_get_pad_compose(sd, state, 0);
> +		break;
> +
> +	case V4L2_SEL_TGT_COMPOSE_DEFAULT:
> +	case V4L2_SEL_TGT_COMPOSE_BOUNDS:
> +		/*
> +		 * The compose default and bounds sizes are equal to the sink
> +		 * crop rectangle size.
> +		 */
> +		crop = v4l2_subdev_get_pad_crop(sd, state, 0);
> +		sel->r.left = 0;
> +		sel->r.top = 0;
> +		sel->r.width = crop->width;
> +		sel->r.height = crop->height;
> +		break;
> +
> +	default:
> +		ret = -EINVAL;
> +		break;
> +	}
> +
> +	return ret;
> +}
> +
> +static int mt9m114_ifp_set_selection(struct v4l2_subdev *sd,
> +				     struct v4l2_subdev_state *state,
> +				     struct v4l2_subdev_selection *sel)
> +{
> +	struct v4l2_mbus_framefmt *format;
> +	struct v4l2_rect *crop;
> +	struct v4l2_rect *compose;
> +
> +	if (sel->target != V4L2_SEL_TGT_CROP &&
> +	    sel->target != V4L2_SEL_TGT_COMPOSE)
> +		return -EINVAL;
> +
> +	/* Crop and compose are only supported on the sink pad. */
> +	if (sel->pad != 0)
> +		return -EINVAL;
> +
> +	format = v4l2_subdev_get_pad_format(sd, state, 0);
> +	crop = v4l2_subdev_get_pad_crop(sd, state, 0);
> +	compose = v4l2_subdev_get_pad_compose(sd, state, 0);
> +
> +	if (sel->target == V4L2_SEL_TGT_CROP) {
> +		/*
> +		 * Clamp the crop rectangle. Demosaicing removes 4 pixels on
> +		 * each side of the image.
> +		 */
> +		crop->left = clamp_t(unsigned int, ALIGN(sel->r.left, 2), 4,
> +				     format->width - 4 -
> +				     MT9M114_SCALER_CROPPED_INPUT_WIDTH);
> +		crop->top = clamp_t(unsigned int, ALIGN(sel->r.top, 2), 4,
> +				    format->height - 4 -
> +				    MT9M114_SCALER_CROPPED_INPUT_HEIGHT);
> +		crop->width = clamp_t(unsigned int, ALIGN(sel->r.width, 2),
> +				      MT9M114_SCALER_CROPPED_INPUT_WIDTH,
> +				      format->width - 4 - crop->left);
> +		crop->height = clamp_t(unsigned int, ALIGN(sel->r.height, 2),
> +				       MT9M114_SCALER_CROPPED_INPUT_HEIGHT,
> +				       format->height - 4 - crop->top);
> +
> +		sel->r = *crop;
> +
> +		/* Propagate to the compose rectangle. */
> +		compose->width = crop->width;
> +		compose->height = crop->height;
> +	} else {
> +		/*
> +		 * Clamp the compose rectangle. The scaler can only downscale.
> +		 */
> +		compose->left = 0;
> +		compose->top = 0;
> +		compose->width = clamp_t(unsigned int, ALIGN(sel->r.width, 2),
> +					 MT9M114_SCALER_CROPPED_INPUT_WIDTH,
> +					 crop->width);
> +		compose->height = clamp_t(unsigned int, ALIGN(sel->r.height, 2),
> +					  MT9M114_SCALER_CROPPED_INPUT_HEIGHT,
> +					  crop->height);
> +
> +		sel->r = *compose;
> +	}
> +
> +	/* Propagate the compose rectangle to the source format. */
> +	format = v4l2_subdev_get_pad_format(sd, state, 1);
> +	format->width = compose->width;
> +	format->height = compose->height;
> +
> +	return 0;
> +}
> +
> +static void mt9m114_ifp_unregistered(struct v4l2_subdev *sd)
> +{
> +	struct mt9m114 *sensor = ifp_to_mt9m114(sd);
> +
> +	v4l2_device_unregister_subdev(&sensor->pa.sd);
> +}
> +
> +static int mt9m114_ifp_registered(struct v4l2_subdev *sd)
> +{
> +	struct mt9m114 *sensor = ifp_to_mt9m114(sd);
> +	int ret;
> +
> +	ret = v4l2_device_register_subdev(sd->v4l2_dev, &sensor->pa.sd);
> +	if (ret < 0) {
> +		dev_err(&sensor->client->dev,
> +			"Failed to register pixel array subdev\n");
> +		return ret;
> +	}
> +
> +	ret = media_create_pad_link(&sensor->pa.sd.entity, 0,
> +				    &sensor->ifp.sd.entity, 0,
> +				    MEDIA_LNK_FL_ENABLED |
> +				    MEDIA_LNK_FL_IMMUTABLE);
> +	if (ret < 0) {
> +		dev_err(&sensor->client->dev,
> +			"Failed to link pixel array to ifp\n");
> +		v4l2_device_unregister_subdev(&sensor->pa.sd);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_subdev_video_ops mt9m114_ifp_video_ops = {
> +	.s_stream = mt9m114_ifp_s_stream,
> +	.g_frame_interval = mt9m114_ifp_g_frame_interval,
> +	.s_frame_interval = mt9m114_ifp_s_frame_interval,
> +};
> +
> +static const struct v4l2_subdev_pad_ops mt9m114_ifp_pad_ops = {
> +	.init_cfg = mt9m114_ifp_init_cfg,
> +	.enum_mbus_code = mt9m114_ifp_enum_mbus_code,
> +	.enum_frame_size = mt9m114_ifp_enum_framesizes,
> +	.enum_frame_interval = mt9m114_ifp_enum_frameintervals,
> +	.get_fmt = v4l2_subdev_get_fmt,
> +	.set_fmt = mt9m114_ifp_set_fmt,
> +	.get_selection = mt9m114_ifp_get_selection,
> +	.set_selection = mt9m114_ifp_set_selection,
> +};
> +
> +static const struct v4l2_subdev_ops mt9m114_ifp_ops = {
> +	.video = &mt9m114_ifp_video_ops,
> +	.pad = &mt9m114_ifp_pad_ops,
> +};
> +
> +static const struct v4l2_subdev_internal_ops mt9m114_ifp_internal_ops = {
> +	.registered = mt9m114_ifp_registered,
> +	.unregistered = mt9m114_ifp_unregistered,
> +};
> +
> +static int mt9m114_ifp_init(struct mt9m114 *sensor)
> +{
> +	struct v4l2_subdev *sd = &sensor->ifp.sd;
> +	struct media_pad *pads = sensor->ifp.pads;
> +	struct v4l2_ctrl_handler *hdl = &sensor->ifp.hdl;
> +	struct v4l2_ctrl *link_freq;
> +	int ret;
> +
> +	/* Initialize the subdev. */
> +	v4l2_i2c_subdev_init(sd, sensor->client, &mt9m114_ifp_ops);
> +	v4l2_i2c_subdev_set_name(sd, sensor->client, NULL, " ifp");
> +
> +	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +	sd->internal_ops = &mt9m114_ifp_internal_ops;
> +
> +	/* Initialize the media entity. */
> +	sd->entity.function = MEDIA_ENT_F_PROC_VIDEO_ISP;
> +	sd->entity.ops = &mt9m114_entity_ops;
> +	pads[0].flags = MEDIA_PAD_FL_SINK;
> +	pads[1].flags = MEDIA_PAD_FL_SOURCE;
> +	ret = media_entity_pads_init(&sd->entity, 2, pads);
> +	if (ret < 0)
> +		return ret;
> +
> +	sensor->ifp.frame_rate = MT9M114_DEF_FRAME_RATE;
> +
> +	/* Initialize the control handler. */
> +	v4l2_ctrl_handler_init(hdl, 8);
> +	v4l2_ctrl_new_std(hdl, &mt9m114_ifp_ctrl_ops,
> +			  V4L2_CID_AUTO_WHITE_BALANCE,
> +			  0, 1, 1, 1);
> +	v4l2_ctrl_new_std_menu(hdl, &mt9m114_ifp_ctrl_ops,
> +			       V4L2_CID_EXPOSURE_AUTO,
> +			       V4L2_EXPOSURE_MANUAL, 0,
> +			       V4L2_EXPOSURE_AUTO);
> +
> +	link_freq = v4l2_ctrl_new_int_menu(hdl, &mt9m114_ifp_ctrl_ops,
> +					   V4L2_CID_LINK_FREQ,
> +					   sensor->bus_cfg.nr_of_link_frequencies - 1,
> +					   0, sensor->bus_cfg.link_frequencies);
> +	if (link_freq)
> +		link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> +	v4l2_ctrl_new_std(hdl, &mt9m114_ifp_ctrl_ops,
> +			  V4L2_CID_PIXEL_RATE,
> +			  sensor->pixrate, sensor->pixrate, 1,
> +			  sensor->pixrate);
> +
> +	sensor->ifp.tpg[MT9M114_TPG_PATTERN] =
> +		v4l2_ctrl_new_std_menu_items(hdl, &mt9m114_ifp_ctrl_ops,
> +					     V4L2_CID_TEST_PATTERN,
> +					     ARRAY_SIZE(mt9m114_test_pattern_menu) - 1,
> +					     0, 0, mt9m114_test_pattern_menu);
> +	sensor->ifp.tpg[MT9M114_TPG_RED] =
> +		v4l2_ctrl_new_std(hdl, &mt9m114_ifp_ctrl_ops,
> +				  V4L2_CID_TEST_PATTERN_RED,
> +				  0, 1023, 1, 1023);
> +	sensor->ifp.tpg[MT9M114_TPG_GREEN] =
> +		v4l2_ctrl_new_std(hdl, &mt9m114_ifp_ctrl_ops,
> +				  V4L2_CID_TEST_PATTERN_GREENR,
> +				  0, 1023, 1, 1023);
> +	sensor->ifp.tpg[MT9M114_TPG_BLUE] =
> +		v4l2_ctrl_new_std(hdl, &mt9m114_ifp_ctrl_ops,
> +				  V4L2_CID_TEST_PATTERN_BLUE,
> +				  0, 1023, 1, 1023);
> +
> +	v4l2_ctrl_cluster(ARRAY_SIZE(sensor->ifp.tpg), sensor->ifp.tpg);
> +
> +	if (hdl->error) {
> +		ret = hdl->error;
> +		goto error;
> +	}
> +
> +	sd->ctrl_handler = hdl;
> +	sd->state_lock = hdl->lock;
> +
> +	ret = v4l2_subdev_init_finalize(sd);
> +	if (ret)
> +		goto error;
> +
> +	return 0;
> +
> +error:
> +	v4l2_ctrl_handler_free(&sensor->ifp.hdl);
> +	media_entity_cleanup(&sensor->ifp.sd.entity);
> +	return ret;
> +}
> +
> +static void mt9m114_ifp_cleanup(struct mt9m114 *sensor)
> +{
> +	v4l2_ctrl_handler_free(&sensor->ifp.hdl);
> +	media_entity_cleanup(&sensor->ifp.sd.entity);
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Power Management
> + */
> +
> +static int mt9m114_power_on(struct mt9m114 *sensor)
> +{
> +	int ret;
> +
> +	/* Enable power and clocks. */
> +	ret = regulator_bulk_enable(ARRAY_SIZE(sensor->supplies),
> +				    sensor->supplies);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = clk_prepare_enable(sensor->clk);
> +	if (ret < 0)
> +		goto error_regulator;
> +
> +	/* Perform a hard reset if available, or a soft reset otherwise. */
> +	if (sensor->reset) {
> +		long freq = clk_get_rate(sensor->clk);
> +		unsigned int duration;
> +
> +		/*
> +		 * The minimum duration is 50 clock cycles, thus typically
> +		 * around 2µs. Double it to be safe.
> +		 */
> +		duration = DIV_ROUND_UP(2 * 50 * 1000000, freq);
> +
> +		gpiod_set_value(sensor->reset, 1);
> +		udelay(duration);
> +		gpiod_set_value(sensor->reset, 0);
> +	} else {
> +		/*
> +		 * The power may have just been turned on, we need to wait for
> +		 * the sensor to be ready to accept I2C commands.
> +		 */
> +		usleep_range(44500, 50000);
> +
> +		cci_write(sensor->regmap, MT9M114_RESET_AND_MISC_CONTROL,
> +			  MT9M114_RESET_SOC, &ret);
> +		cci_write(sensor->regmap, MT9M114_RESET_AND_MISC_CONTROL, 0,
> +			  &ret);
> +
> +		if (ret < 0) {
> +			dev_err(&sensor->client->dev, "Soft reset failed\n");
> +			goto error_clock;
> +		}
> +	}
> +
> +	/*
> +	 * Wait for the sensor to be ready to accept I2C commands by polling the
> +	 * command register to wait for initialization to complete.
> +	 */
> +	usleep_range(44500, 50000);
> +
> +	ret = mt9m114_poll_command(sensor, MT9M114_COMMAND_REGISTER_SET_STATE);
> +	if (ret < 0)
> +		goto error_clock;
> +
> +	if (sensor->bus_cfg.bus_type == V4L2_MBUS_PARALLEL) {
> +		/*
> +		 * In parallel mode (OE set to low), the sensor will enter the
> +		 * streaming state after initialization. Enter the standby
> +		 * manually to stop streaming.
> +		 */
> +		ret = mt9m114_set_state(sensor,
> +					MT9M114_SYS_STATE_ENTER_STANDBY);
> +		if (ret < 0)
> +			goto error_clock;
> +	}
> +
> +	/*
> +	 * Before issuing any Set-State command, we must ensure that the sensor
> +	 * reaches the standby mode (either initiated manually above in
> +	 * parallel mode, or automatically after reset in MIPI mode).
> +	 */
> +	ret = mt9m114_poll_state(sensor, MT9M114_SYS_STATE_STANDBY);
> +	if (ret < 0)
> +		goto error_clock;
> +
> +	return 0;
> +
> +error_clock:
> +	clk_disable_unprepare(sensor->clk);
> +error_regulator:
> +	regulator_bulk_disable(ARRAY_SIZE(sensor->supplies), sensor->supplies);
> +	return ret;
> +}
> +
> +static void mt9m114_power_off(struct mt9m114 *sensor)
> +{
> +	clk_disable_unprepare(sensor->clk);
> +	regulator_bulk_disable(ARRAY_SIZE(sensor->supplies), sensor->supplies);
> +}
> +
> +static int mt9m114_runtime_resume(struct device *dev)
> +{
> +	struct v4l2_subdev *sd = dev_get_drvdata(dev);
> +	struct mt9m114 *sensor = ifp_to_mt9m114(sd);
> +	int ret;
> +
> +	ret = mt9m114_power_on(sensor);
> +	if (ret)
> +		return ret;
> +
> +	ret = mt9m114_initialize(sensor);
> +	if (ret) {
> +		mt9m114_power_off(sensor);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int mt9m114_runtime_suspend(struct device *dev)
> +{
> +	struct v4l2_subdev *sd = dev_get_drvdata(dev);
> +	struct mt9m114 *sensor = ifp_to_mt9m114(sd);
> +
> +	mt9m114_power_off(sensor);
> +
> +	return 0;
> +}
> +
> +static const struct dev_pm_ops mt9m114_pm_ops = {
> +	SET_RUNTIME_PM_OPS(mt9m114_runtime_suspend, mt9m114_runtime_resume, NULL)
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Probe & Remove
> + */
> +
> +static int mt9m114_clk_init(struct mt9m114 *sensor)
> +{
> +	unsigned int link_freq;
> +
> +	/* Hardcode the PLL multiplier and dividers to default settings. */
> +	sensor->pll.m = 32;
> +	sensor->pll.n = 1;
> +	sensor->pll.p = 7;
> +
> +	/*
> +	 * Calculate the pixel rate and link frequency. The CSI-2 bus is clocked
> +	 * for 16-bit per pixel, transmitted in DDR over a single lane. For
> +	 * parallel mode, the sensor ouputs one pixel in two PIXCLK cycles.
> +	 */
> +	sensor->pixrate = clk_get_rate(sensor->clk) * sensor->pll.m
> +			/ ((sensor->pll.n + 1) * (sensor->pll.p + 1));
> +
> +	link_freq = sensor->bus_cfg.bus_type == V4L2_MBUS_CSI2_DPHY
> +		  ? sensor->pixrate * 8 : sensor->pixrate * 2;
> +
> +	if (sensor->bus_cfg.nr_of_link_frequencies != 1 ||
> +	    sensor->bus_cfg.link_frequencies[0] != link_freq) {
> +		dev_err(&sensor->client->dev, "Unsupported DT link-frequencies\n");
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int mt9m114_identify(struct mt9m114 *sensor)
> +{
> +	u64 major, minor, release, customer;
> +	u64 value;
> +	int ret;
> +
> +	ret = cci_read(sensor->regmap, MT9M114_CHIP_ID, &value, NULL);
> +	if (ret) {
> +		dev_err(&sensor->client->dev, "Failed to read chip ID\n");
> +		return -ENXIO;
> +	}
> +
> +	if (value != 0x2481) {
> +		dev_err(&sensor->client->dev, "Invalid chip ID 0x%04llx\n",
> +			value);
> +		return -ENXIO;
> +	}
> +
> +	cci_read(sensor->regmap, MT9M114_MON_MAJOR_VERSION, &major, &ret);
> +	cci_read(sensor->regmap, MT9M114_MON_MINOR_VERSION, &minor, &ret);
> +	cci_read(sensor->regmap, MT9M114_MON_RELEASE_VERSION, &release, &ret);
> +	cci_read(sensor->regmap, MT9M114_CUSTOMER_REV, &customer, &ret);
> +	if (ret) {
> +		dev_err(&sensor->client->dev, "Failed to read version\n");
> +		return -ENXIO;
> +	}
> +
> +	dev_dbg(&sensor->client->dev,
> +		"monitor v%llu.%llu.%04llx customer rev 0x%04llx\n",
> +		major, minor, release, customer);
> +
> +	return 0;
> +}
> +
> +static int mt9m114_parse_dt(struct mt9m114 *sensor)
> +{
> +	struct fwnode_handle *fwnode = dev_fwnode(&sensor->client->dev);
> +	struct fwnode_handle *ep;
> +	int ret;
> +
> +	ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
> +	if (!ep) {
> +		dev_err(&sensor->client->dev, "No endpoint found\n");
> +		return -EINVAL;
> +	}
> +
> +	sensor->bus_cfg.bus_type = V4L2_MBUS_UNKNOWN;
> +	ret = v4l2_fwnode_endpoint_alloc_parse(ep, &sensor->bus_cfg);
> +	fwnode_handle_put(ep);
> +	if (ret < 0) {
> +		dev_err(&sensor->client->dev, "Failed to parse endpoint\n");
> +		goto error;
> +	}
> +
> +	switch (sensor->bus_cfg.bus_type) {
> +	case V4L2_MBUS_CSI2_DPHY:
> +	case V4L2_MBUS_PARALLEL:
> +		break;
> +
> +	default:
> +		dev_err(&sensor->client->dev, "unsupported bus type %u\n",
> +			sensor->bus_cfg.bus_type);
> +		ret = -EINVAL;
> +		goto error;
> +	}
> +
> +	return 0;
> +
> +error:
> +	v4l2_fwnode_endpoint_free(&sensor->bus_cfg);
> +	return ret;
> +}
> +
> +static int mt9m114_probe(struct i2c_client *client)
> +{
> +	struct device *dev = &client->dev;
> +	struct mt9m114 *sensor;
> +	int ret;
> +
> +	sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
> +	if (!sensor)
> +		return -ENOMEM;
> +
> +	sensor->client = client;
> +
> +	sensor->regmap = devm_cci_regmap_init_i2c(client, 16);
> +	if (IS_ERR(sensor->regmap)) {
> +		dev_err(dev, "Unable to initialize I2C\n");
> +		return -ENODEV;
> +	}
> +
> +	ret = mt9m114_parse_dt(sensor);
> +	if (ret < 0)
> +		return ret;
> +
> +	/* Acquire clocks, GPIOs and regulators. */
> +	sensor->clk = devm_clk_get(dev, NULL);
> +	if (IS_ERR(sensor->clk)) {
> +		ret = PTR_ERR(sensor->clk);
> +		dev_err_probe(dev, ret, "Failed to get clock\n");
> +		goto error_ep_free;
> +	}
> +
> +	sensor->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> +	if (IS_ERR(sensor->reset)) {
> +		ret = PTR_ERR(sensor->reset);
> +		dev_err_probe(dev, ret, "Failed to get reset GPIO\n");
> +		goto error_ep_free;
> +	}
> +
> +	sensor->supplies[0].supply = "vddio";
> +	sensor->supplies[1].supply = "vdd";
> +	sensor->supplies[2].supply = "vaa";
> +
> +	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(sensor->supplies),
> +				      sensor->supplies);
> +	if (ret < 0) {
> +		dev_err_probe(dev, ret, "Failed to get regulators\n");
> +		goto error_ep_free;
> +	}
> +
> +	ret = mt9m114_clk_init(sensor);
> +	if (ret)
> +		return ret;
> +
> +	/*
> +	 * Identify the sensor. The driver supports runtime PM, but needs to
> +	 * work when runtime PM is disabled in the kernel. To that end, power
> +	 * the sensor on manually here, and initialize it after identification
> +	 * to reach the same state as if resumed through runtime PM.
> +	 */
> +	ret = mt9m114_power_on(sensor);
> +	if (ret < 0) {
> +		dev_err_probe(dev, ret, "Could not power on the device\n");
> +		return ret;
> +	}
> +
> +	ret = mt9m114_identify(sensor);
> +	if (ret < 0)
> +		goto error_power_off;
> +
> +	ret = mt9m114_initialize(sensor);
> +	if (ret < 0)
> +		goto error_power_off;
> +
> +	/*
> +	 * Enable runtime PM with autosuspend. As the device has been powered
> +	 * manually, mark it as active, and increase the usage count without
> +	 * resuming the device.
> +	 */
> +	pm_runtime_set_active(dev);
> +	pm_runtime_get_noresume(dev);
> +	pm_runtime_enable(dev);
> +	pm_runtime_set_autosuspend_delay(dev, 1000);
> +	pm_runtime_use_autosuspend(dev);
> +
> +	/* Initialize the subdevices. */
> +	ret = mt9m114_pa_init(sensor);
> +	if (ret < 0)
> +		goto error_pm_cleanup;
> +
> +	ret = mt9m114_ifp_init(sensor);
> +	if (ret < 0)
> +		goto error_pa_cleanup;
> +
> +	ret = v4l2_async_register_subdev(&sensor->ifp.sd);
> +	if (ret < 0)
> +		goto error_ifp_cleanup;
> +
> +	/*
> +	 * Decrease the PM usage count. The device will get suspended after the
> +	 * autosuspend delay, turning the power off.
> +	 */
> +	pm_runtime_mark_last_busy(dev);
> +	pm_runtime_put_autosuspend(dev);
> +
> +	return 0;
> +
> +error_ifp_cleanup:
> +	mt9m114_ifp_cleanup(sensor);
> +error_pa_cleanup:
> +	mt9m114_pa_cleanup(sensor);
> +error_pm_cleanup:
> +	pm_runtime_disable(dev);
> +	pm_runtime_put_noidle(dev);
> +error_power_off:
> +	mt9m114_power_off(sensor);
> +error_ep_free:
> +	v4l2_fwnode_endpoint_free(&sensor->bus_cfg);
> +	return ret;
> +}
> +
> +static void mt9m114_remove(struct i2c_client *client)
> +{
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct mt9m114 *sensor = ifp_to_mt9m114(sd);
> +	struct device *dev = &client->dev;
> +
> +	v4l2_async_unregister_subdev(&sensor->ifp.sd);
> +
> +	mt9m114_ifp_cleanup(sensor);
> +	mt9m114_pa_cleanup(sensor);
> +	v4l2_fwnode_endpoint_free(&sensor->bus_cfg);
> +
> +	/*
> +	 * Disable runtime PM. In case runtime PM is disabled in the kernel,
> +	 * make sure to turn power off manually.
> +	 */
> +	pm_runtime_disable(dev);
> +	if (!pm_runtime_status_suspended(dev))
> +		mt9m114_power_off(sensor);
> +	pm_runtime_set_suspended(dev);
> +}
> +
> +static const struct of_device_id mt9m114_of_ids[] = {
> +	{ .compatible = "onnn,mt9m114" },
> +	{ /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, mt9m114_of_ids);
> +
> +static struct i2c_driver mt9m114_driver = {
> +	.driver = {
> +		.name	= "mt9m114",
> +		.pm	= &mt9m114_pm_ops,
> +		.of_match_table = mt9m114_of_ids,
> +	},
> +	.probe_new	= mt9m114_probe,
> +	.remove		= mt9m114_remove,
> +};
> +
> +module_i2c_driver(mt9m114_driver);
> +
> +MODULE_DESCRIPTION("onsemi MT9M114 Sensor Driver");
> +MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>");
> +MODULE_LICENSE("GPL");

Wow, a rather complex sensor and driver indeed...
I've not re-tested on my parallel setup though.

Most comments are minor, with a few clarification and trivial changes
Reviewed-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>

Thanks
  j

> --
> Regards,
>
> Laurent Pinchart
>




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux