Add INA233 binding documents for Yosemite V4 config. Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx> --- .../devicetree/bindings/hwmon/ina233.txt | 27 +++++++++++++++++++ MAINTAINERS | 6 +++++ 2 files changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/ina233.txt diff --git a/Documentation/devicetree/bindings/hwmon/ina233.txt b/Documentation/devicetree/bindings/hwmon/ina233.txt new file mode 100644 index 000000000000..a1067788ec0c --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ina233.txt @@ -0,0 +1,27 @@ +Bindings for the Maxim MAX31790 Intelligent Fan Controller +========================================================== + +Reference: + +https://pdf1.alldatasheet.com/datasheet-pdf/view/930928/TI1/INA233.html + +The INA233 device is a current, voltage and power monitor with an I2C-, SMBus-,and PMBus-compatible interface +that is compliant with digital bus voltages from 1.8 V to 5.0 V. +The device monitors and reports values for current, voltage and power. +The integrated power accumulator can be used for energy or average power calculations. +Programmable calibration value, conversion times and averaging when combined with an internal multiplier +enable direct readouts of current in amperes and power in watts. + +Required properties: +- compatible : ti,ina233 +- reg : I2C address +- resistor-calibration : MFR_CALIBRATION which will be set into register 0xd4 +- current-lsb : Current_LSB for calibration +Example: + + ina233@45 { + compatible = "ti,ina233"; + reg = <0x45>; + resistor-calibration = /bits/ 16 <0x0a00>; + current-lsb= /bits/ 16 <0x0001>; + }; diff --git a/MAINTAINERS b/MAINTAINERS index bf0f54c24f81..48b9a73d259f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10243,6 +10243,12 @@ F: Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml F: Documentation/hwmon/ina209.rst F: drivers/hwmon/ina209.c +INA233 HARDWARE MONITOR DRIVER +M: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx> +S: Odd Fixes +F: Documentation/devicetree/bindings/hwmon/ina233.txt +F: drivers/hwmon/ina233.c + INA2XX HARDWARE MONITOR DRIVER M: Guenter Roeck <linux@xxxxxxxxxxxx> L: linux-hwmon@xxxxxxxxxxxxxxx -- 2.25.1
