From: Weidong Wang <wangweidong.a@xxxxxxxxxx>
Add two properties, the "awinic,audio-channel" property and the
"awinic,sync-flag". The "awinic,audio-channel" is used to make
different PA load different configurations, the "awinic,sync-flag"
is used to synchronize the phases of multiple PA. These two properties
will be read by the corresponding driver, allowing multi-PA to
achieve better playback effect.
Signed-off-by: Weidong Wang <wangweidong.a@xxxxxxxxxx>
---
.../bindings/sound/awinic,aw88395.yaml | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml b/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml
index 4051c2538caf..b977d3de87cb 100644
--- a/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml
+++ b/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml
@@ -32,11 +32,25 @@ properties:
reset-gpios:
maxItems: 1
+ awinic,audio-channel:
+ description:
+ It is used to distinguish multiple PA devices, so that different
+ configurations can be loaded to different PA devices
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 7
+
+ awinic,sync-flag:
+ description:
+ Flag bit used to keep the phase synchronized in the case of multiple PA
+ $ref: /schemas/types.yaml#/definitions/flag
+
required:
- compatible
- reg
- '#sound-dai-cells'
- reset-gpios
+ - awinic,audio-channel
unevaluatedProperties: false
@@ -51,5 +65,7 @@ examples:
reg = <0x34>;
#sound-dai-cells = <0>;
reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+ awinic,audio-channel = <0>;
+ awinic,sync-flag;
};
};
--
2.41.0
