The PMIC regulator node is missing regulator supplies. Now that the binding supports them, add all the power rail supplies. Most of them are fed from a system-wide semi-regulated power rail. A couple LDOs are fed from the PMIC's own buck regulator outputs. Signed-off-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx> --- .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 28 +++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index 6ce16a265e05..d48c66cc8c18 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -103,6 +103,14 @@ pp3300_alw: regulator6 { regulator-max-microvolt = <3300000>; }; + /* system wide semi-regulated power rail from charger */ + reg_vsys: regulator-vsys { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-always-on; + regulator-boot-on; + }; + reserved_memory: reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -404,6 +412,26 @@ &mt6358codec { Avdd-supply = <&mt6358_vaud28_reg>; }; +&mt6358regulator { + vsys-ldo1-supply = <®_vsys>; + vsys-ldo2-supply = <®_vsys>; + vsys-ldo3-supply = <®_vsys>; + vsys-vcore-supply = <®_vsys>; + vsys-vdram1-supply = <®_vsys>; + vsys-vgpu-supply = <®_vsys>; + vsys-vmodem-supply = <®_vsys>; + vsys-vpa-supply = <®_vsys>; + vsys-vproc11-supply = <®_vsys>; + vsys-vproc12-supply = <®_vsys>; + vsys-vs1-supply = <®_vsys>; + vsys-vs2-supply = <®_vsys>; + vs1-ldo1-supply = <&mt6358_vs1_reg>; + vs2-ldo1-supply = <&mt6358_vdram1_reg>; + vs2-ldo2-supply = <&mt6358_vs2_reg>; + vs2-ldo3-supply = <&mt6358_vs2_reg>; + vs2-ldo4-supply = <&mt6358_vs2_reg>; +}; + &mt6358_vgpu_reg { regulator-min-microvolt = <625000>; regulator-max-microvolt = <900000>; -- 2.42.0.459.ge4e396fd5e-goog