The axiethernet driver can use the dmaengine framework to communicate with the xilinx DMAengine driver(AXIDMA, MCDMA). The inspiration behind this dmaengine adoption is to reuse the in-kernel xilinx dma engine driver[1] and remove redundant dma programming sequence[2] from the ethernet driver. This simplifies the ethernet driver and also makes it generic to be hooked to any complaint dma IP i.e AXIDMA, MCDMA without any modification. The dmaengine framework was extended for metadata API support during the axidma RFC[3] discussion. However, it still needs further enhancements to make it well suited for ethernet usecases. Comments, suggestions, thoughts to implement remaining functional features are very welcome! [1]: https://github.com/torvalds/linux/blob/master/drivers/dma/xilinx/xilinx_dma.c [2]: https://github.com/torvalds/linux/blob/master/drivers/net/ethernet/xilinx/xilinx_axienet_main.c#L238 [3]: http://lkml.iu.edu/hypermail/linux/kernel/1804.0/00367.html [4]: https://lore.kernel.org/all/20221124102745.2620370-1-sarath.babu.naidu.gaddam@xxxxxxx Changes in v6: - Remove patchset 1-7 as it was applied to dmaengine tree in v5 version. - Added Krzysztof reviewed-by tag for dmaengine binding patch. - Rename struct axi_skbuff to skbuf_dma_descriptor and removed __packed attribute. - Drop kmem_cache implementation and switch to using ring buffers. - Remove __inline from axienet_init_dmaengine(). - Name labels after the target. - Add error check for platform_get_irq_optional(). - Fix double space and no empty lines between call and its error check. Changes in v5: - Fix git am failure on net-next - Addressed DT binding review comments i.e Modified commit description to remove dmaengine framework references and instead describe how axiethernet IP uses DMA channels. - Fix "^[tr]x_chan[0-9]|1[0-5]$" -> "^[tr]x_chan([0-9]|1[0-5])$" - Drop generic dmas description. - Fix kmem_cache resource leak. - Merge Xilinx DMA enhancements and optimization[4] into this series. Changes in V4: - Updated commit description about tx/rx channels name(1/3). - Removed "dt-bindings" and "dmaengine" strings in subject(1/3). - Extended dmas and dma-names to support MCDMA channel names(1/3). - Rename has_dmas to use_dmaegine(2/3). - Remove the AXIENET_USE_DMA(2/3). - Remove the AXIENET_USE_DMA(3/3). - Add dev_err_probe for dma_request_chan error handling(3/3). - Add kmem_cache_destroy for create in axienet_setup_dma_chan(3/3). Changes in V3: - Moved RFC to PATCH. - Removed ethtool get/set coalesce, will be added later. - Added backward comapatible support. - Split the dmaengine support patch of V2 into two patches(2/3 and 3/3). https://lore.kernel.org/all/20220920055703.13246-4-sarath.babu.naidu.gaddam@xxxxxxx/ Changes in V2: - Add ethtool get/set coalesce and DMA reset using DMAengine framework. - Add performance numbers. - Remove .txt and change the name of file to xlnx,axiethernet.yaml. - Fix DT check warning(Fix DT check warning('device_type' does not match any of the regexes:'pinctrl-[0-9]+' From schema: Documentation/ devicetree/bindings/net/xilinx_axienet.yaml). Radhey Shyam Pandey (2): dt-bindings: net: xlnx,axi-ethernet: Introduce DMA support net: axienet: Introduce dmaengine support Sarath Babu Naidu Gaddam (1): net: axienet: Preparatory changes for dmaengine support .../bindings/net/xlnx,axi-ethernet.yaml | 16 + drivers/net/ethernet/xilinx/Kconfig | 1 + drivers/net/ethernet/xilinx/xilinx_axienet.h | 35 + .../net/ethernet/xilinx/xilinx_axienet_main.c | 661 ++++++++++++++---- 4 files changed, 590 insertions(+), 123 deletions(-) -- 2.34.1
