PM8916 (and probably some other similar pmics) have hardware blocks for battery monitoring and charging. Add patterns for respecive nodes so the dt for those blocks can be validated properly. Signed-off-by: Nikita Travkin <nikita@xxxxxxx> --- Schemas for those devices were added in [1]. [1] https://lore.kernel.org/r/20230915-pm8916-bms-lbc-v3-0-f30881e951a0@xxxxxxx --- Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml index 9f03436b1cdc..8bcd76748faa 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml @@ -133,9 +133,15 @@ patternProperties: type: object $ref: /schemas/sound/qcom,pm8916-wcd-analog-codec.yaml# + "^battery@[0-9a-f]+$": + type: object + oneOf: + - $ref: /schemas/power/supply/qcom,pm8916-bms-vm.yaml# + "^charger@[0-9a-f]+$": type: object oneOf: + - $ref: /schemas/power/supply/qcom,pm8916-lbc.yaml# - $ref: /schemas/power/supply/qcom,pm8941-charger.yaml# - $ref: /schemas/power/supply/qcom,pm8941-coincell.yaml# - $ref: /schemas/power/supply/qcom,pmi8998-charger.yaml# -- 2.41.0