Convert the document for Marvell ethernet switches to json-schema.
Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
---
.../devicetree/bindings/net/dsa/marvell.txt | 109 ----------
.../devicetree/bindings/net/dsa/marvell.yaml | 204 ++++++++++++++++++
2 files changed, 204 insertions(+), 109 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/dsa/marvell.txt
create mode 100644 Documentation/devicetree/bindings/net/dsa/marvell.yaml
diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt
deleted file mode 100644
index 6ec0c181b6db..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/marvell.txt
+++ /dev/null
@@ -1,109 +0,0 @@
-Marvell DSA Switch Device Tree Bindings
----------------------------------------
-
-WARNING: This binding is currently unstable. Do not program it into a
-FLASH never to be changed again. Once this binding is stable, this
-warning will be removed.
-
-If you need a stable binding, use the old dsa.txt binding.
-
-Marvell Switches are MDIO devices. The following properties should be
-placed as a child node of an mdio device.
-
-The properties described here are those specific to Marvell devices.
-Additional required and optional properties can be found in dsa.txt.
-
-The compatibility string is used only to find an identification register,
-which is at a different MDIO base address in different switch families.
-- "marvell,mv88e6085" : Switch has base address 0x10. Use with models:
- 6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165,
- 6171, 6172, 6175, 6176, 6185, 6240, 6320, 6321,
- 6341, 6350, 6351, 6352
-- "marvell,mv88e6190" : Switch has base address 0x00. Use with models:
- 6190, 6190X, 6191, 6290, 6361, 6390, 6390X
-- "marvell,mv88e6250" : Switch has base address 0x08 or 0x18. Use with model:
- 6220, 6250
-
-Required properties:
-- compatible : Should be one of "marvell,mv88e6085",
- "marvell,mv88e6190" or "marvell,mv88e6250" as
- indicated above
-- reg : Address on the MII bus for the switch.
-
-Optional properties:
-
-- reset-gpios : Should be a gpio specifier for a reset line
-- interrupts : Interrupt from the switch
-- interrupt-controller : Indicates the switch is itself an interrupt
- controller. This is used for the PHY interrupts.
-#interrupt-cells = <2> : Controller uses two cells, number and flag
-- eeprom-length : Set to the length of an EEPROM connected to the
- switch. Must be set if the switch can not detect
- the presence and/or size of a connected EEPROM,
- otherwise optional.
-- mdio : Container of PHY and devices on the switches MDIO
- bus.
-- mdio? : Container of PHYs and devices on the external MDIO
- bus. The node must contains a compatible string of
- "marvell,mv88e6xxx-mdio-external"
-
-Example:
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&gpio0>;
- interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
- #interrupt-cells = <2>;
-
- switch0: switch@0 {
- compatible = "marvell,mv88e6085";
- reg = <0>;
- reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- switch1phy0: switch1phy0@0 {
- reg = <0>;
- interrupt-parent = <&switch0>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&gpio0>;
- interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
- #interrupt-cells = <2>;
-
- switch0: switch@0 {
- compatible = "marvell,mv88e6190";
- reg = <0>;
- reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- switch1phy0: switch1phy0@0 {
- reg = <0>;
- interrupt-parent = <&switch0>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- mdio1 {
- compatible = "marvell,mv88e6xxx-mdio-external";
- #address-cells = <1>;
- #size-cells = <0>;
- switch1phy9: switch1phy0@9 {
- reg = <9>;
- };
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.yaml b/Documentation/devicetree/bindings/net/dsa/marvell.yaml
new file mode 100644
index 000000000000..45756b8d74d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/marvell.yaml
@@ -0,0 +1,204 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/marvell.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Ethernet Switches
+
+$ref: dsa.yaml#/$defs/ethernet-ports
+
+maintainers:
+ - Andrew Lunn <andrew@xxxxxxx>
+ - Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
+
+description:
+ Marvell ethernet switches are MDIO devices.
+
+properties:
+ compatible:
+ oneOf:
+ - description: |
+ Switch has base address 0x10. Use with models:
+ 6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165, 6171, 6172, 6175,
+ 6176, 6185, 6240, 6320, 6321, 6341, 6350, 6351, 6352
+ const: marvell,mv88e6085
+
+ - description: |
+ Switch has base address 0x00. Use with models:
+ 6190, 6190X, 6191, 6290, 6361, 6390, 6390X
+ const: marvell,mv88e6190
+
+ - description: |
+ Switch has base address 0x08 or 0x18. Use with models:
+ 6220, 6250
+ const: marvell,mv88e6250
+
+ reg:
+ maxItems: 1
+
+ reset-gpios:
+ description: GPIO to be used to reset the whole device
+ maxItems: 1
+
+ "#interrupt-cells":
+ const: 2
+
+ interrupt-controller: true
+
+ interrupts:
+ maxItems: 1
+
+ eeprom-length:
+ description:
+ Set to the length of an EEPROM connected to the switch. Must be set if the
+ switch can not detect the presence and/or size of a connected EEPROM,
+ otherwise optional.
+
+ mdio:
+ description:
+ The optional node for the MDIO bus of the switch. The bus will be
+ registered non-OF-based if this is not defined.
+ $ref: /schemas/net/mdio.yaml#
+
+ mdio-external:
+ description: The externally reachable MDIO bus of the 6390 family switches
+ $ref: /schemas/net/mdio.yaml#
+
+ properties:
+ compatible:
+ const: marvell,mv88e6xxx-mdio-external
+
+ required:
+ - compatible
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ enum:
+ - marvell,mv88e6085
+ - marvell,mv88e6250
+ then:
+ properties:
+ mdio-external: false
+
+ - if:
+ required: [ mdio ]
+ then:
+ patternProperties:
+ "^(ethernet-)?ports$":
+ patternProperties:
+ "^(ethernet-)?port@[0-9]+$":
+ $ref: /schemas/net/ethernet-controller.yaml#/$defs/phylink
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch@0 {
+ compatible = "marvell,mv88e6085";
+ reg = <0>;
+ reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ phy-mode = "rmii";
+ ethernet = <&fec1>;
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "swp1";
+ };
+ };
+ };
+ };
+
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch: switch@0 {
+ compatible = "marvell,mv88e6190";
+ reg = <0>;
+ reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ phy-mode = "rmii";
+ ethernet = <&fec1>;
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "swp1";
+ phy-handle = <ðphy1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "swp2";
+ phy-handle = <&ext_ethphy0>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ interrupt-parent = <&switch>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ mdio-external {
+ compatible = "marvell,mv88e6xxx-mdio-external";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ext_ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ };
+ };
+ };
--
2.39.2
