From: Rafał Miłecki <rafal@xxxxxxxxxx> Move code added by Vivek to the bcm-ns.dtsi which uses dual licensing. That syncs more Northstar code to be based on the same licensing schema. This code was added in the commit 37f6130ec39f ("ARM: dts: BCM5301X: Make USB 3.0 PHY use MDIO PHY driver"). Cc: Vivek Unune <npcomplete13@xxxxxxxxx> Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx> --- Vivek: can you send your Acked-by for this patch, please? --- arch/arm/boot/dts/broadcom/bcm-ns.dtsi | 27 ++++++++++++++++++++++++ arch/arm/boot/dts/broadcom/bcm5301x.dtsi | 27 ------------------------ 2 files changed, 27 insertions(+), 27 deletions(-) diff --git a/arch/arm/boot/dts/broadcom/bcm-ns.dtsi b/arch/arm/boot/dts/broadcom/bcm-ns.dtsi index f0f3a718c413..d0d5f7e52a91 100644 --- a/arch/arm/boot/dts/broadcom/bcm-ns.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm-ns.dtsi @@ -327,6 +327,29 @@ mdio: mdio@18003000 { #address-cells = <1>; }; + mdio-mux@18003000 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x18003000 0x4>; + mux-mask = <0x200>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + usb3_phy: usb3-phy@10 { + compatible = "brcm,ns-ax-usb3-phy"; + reg = <0x10>; + usb3-dmp-syscon = <&usb3_dmp>; + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + rng: rng@18004000 { compatible = "brcm,bcm5301x-rng"; reg = <0x18004000 0x14>; @@ -467,6 +490,10 @@ nand_controller: nand-controller@18028000 { brcm,nand-has-wp; }; + usb3_dmp: syscon@18105000 { + reg = <0x18105000 0x1000>; + }; + thermal-zones { cpu_thermal: cpu-thermal { polling-delay-passive = <0>; diff --git a/arch/arm/boot/dts/broadcom/bcm5301x.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x.dtsi index de46dbd5b876..f06a178a9240 100644 --- a/arch/arm/boot/dts/broadcom/bcm5301x.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm5301x.dtsi @@ -62,33 +62,6 @@ periph_clk: periph_clk { }; }; - mdio-mux@18003000 { - compatible = "mdio-mux-mmioreg", "mdio-mux"; - mdio-parent-bus = <&mdio>; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x18003000 0x4>; - mux-mask = <0x200>; - - mdio@0 { - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - - usb3_phy: usb3-phy@10 { - compatible = "brcm,ns-ax-usb3-phy"; - reg = <0x10>; - usb3-dmp-syscon = <&usb3_dmp>; - #phy-cells = <0>; - status = "disabled"; - }; - }; - }; - - usb3_dmp: syscon@18105000 { - reg = <0x18105000 0x1000>; - }; - i2c0: i2c@18009000 { compatible = "brcm,iproc-i2c"; reg = <0x18009000 0x50>; -- 2.35.3