Hello:
This series was applied to netdev/net-next.git (main)
by David S. Miller <davem@xxxxxxxxxxxxx>:
On Wed, 13 Sep 2023 14:40:09 +0530 you wrote:
> This series adds support for half duplex operation for ICSSG driver.
>
> In order to support half-duplex operation at 10M and 100M link speeds, the
> PHY collision detection signal (COL) should be routed to ICSSG GPIO pin
> (PRGx_PRU0/1_GPI10) so that firmware can detect collision signal and apply
> the CSMA/CD algorithm applicable for half duplex operation. A DT property,
> "ti,half-duplex-capable" is introduced for this purpose in the first patch
> of the series. If board has PHY COL pin conencted to PRGx_PRU1_GPIO10,
> this DT property can be added to eth node of ICSSG, MII port to support
> half duplex operation at that port.
>
> [...]
Here is the summary with links:
- [net-next,v3,1/2] dt-bindings: net: Add documentation for Half duplex support.
https://git.kernel.org/netdev/net-next/c/927c568d6212
- [net-next,v3,2/2] net: ti: icssg-prueth: Add support for half duplex operation
https://git.kernel.org/netdev/net-next/c/0a205f0fe8dd
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
