From: Peng Fan <peng.fan@xxxxxxx>
Per binding doc, i.MX93 GPIO supports two interrupts, and not
compatible with i.MX7ULP. So update the node
Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
---
arch/arm64/boot/dts/freescale/imx93.dtsi | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 6f85a05ee7e1..011c34a57c53 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -825,11 +825,12 @@ usdhc3: mmc@428b0000 {
};
gpio2: gpio@43810080 {
- compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
+ compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
reg = <0x43810080 0x1000>, <0x43810040 0x40>;
gpio-controller;
#gpio-cells = <2>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&clk IMX93_CLK_GPIO2_GATE>,
@@ -839,11 +840,12 @@ gpio2: gpio@43810080 {
};
gpio3: gpio@43820080 {
- compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
+ compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
reg = <0x43820080 0x1000>, <0x43820040 0x40>;
gpio-controller;
#gpio-cells = <2>;
- interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&clk IMX93_CLK_GPIO3_GATE>,
@@ -854,11 +856,12 @@ gpio3: gpio@43820080 {
};
gpio4: gpio@43830080 {
- compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
+ compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
reg = <0x43830080 0x1000>, <0x43830040 0x40>;
gpio-controller;
#gpio-cells = <2>;
- interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&clk IMX93_CLK_GPIO4_GATE>,
@@ -868,11 +871,12 @@ gpio4: gpio@43830080 {
};
gpio1: gpio@47400080 {
- compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
+ compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
reg = <0x47400080 0x1000>, <0x47400040 0x40>;
gpio-controller;
#gpio-cells = <2>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&clk IMX93_CLK_GPIO1_GATE>,
--
2.37.1
