[PATCH v4] media: dt-bindings: Add OV5642

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Fabio Estevam <festevam@xxxxxxx>

As explained in the description text from trivial-devices.yaml:

"This is a list of trivial I2C and SPI devices that have simple device tree
bindings, consisting only of a compatible field, an address and possibly an
interrupt line."

A camera device does not fall into this category as it needs other
properties such as regulators, reset and powerdown GPIOs, clocks,
media endpoint.

Remove the OV5642 entry from trivial-devices.yaml and add its own
ovti,ov5642.yaml.

Signed-off-by: Fabio Estevam <festevam@xxxxxxx>
---
Changes since v3:
- Make propeties conditional on parallel verus MIPI CSI-2. (Sakari)
- Remove clock-names as there is a single clock.
- Pass bus-type.

 .../bindings/media/i2c/ovti,ov5642.yaml       | 141 ++++++++++++++++++
 .../devicetree/bindings/trivial-devices.yaml  |   2 -
 2 files changed, 141 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5642.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5642.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5642.yaml
new file mode 100644
index 000000000000..01f8b2b3fd17
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5642.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5642.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV5642 Image Sensor
+
+maintainers:
+  - Fabio Estevam <festevam@xxxxxxxxx>
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: ovti,ov5642
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: XCLK Input Clock
+
+  AVDD-supply:
+    description: Analog voltage supply, 2.8V.
+
+  DVDD-supply:
+    description: Digital core voltage supply, 1.5V.
+
+  DOVDD-supply:
+    description: Digital I/O voltage supply, 1.8V.
+
+  powerdown-gpios:
+    maxItems: 1
+    description: Reference to the GPIO connected to the powerdown pin, if any.
+
+  reset-gpios:
+    maxItems: 1
+    description: Reference to the GPIO connected to the reset pin, if any.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    description: |
+      Video output port.
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-type:
+            enum: [5, 6]
+
+          bus-width:
+            enum: [8, 10]
+            default: 10
+
+          data-shift:
+            enum: [0, 2]
+            default: 0
+
+          hsync-active:
+            enum: [0, 1]
+            default: 1
+
+          vsync-active:
+            enum: [0, 1]
+            default: 1
+
+          pclk-sample:
+            enum: [0, 1]
+            default: 1
+
+        allOf:
+          - if:
+              properties:
+                bus-type:
+                  const: 6
+            then:
+              properties:
+                hsync-active: false
+                vsync-active: false
+
+          - if:
+              properties:
+                bus-width:
+                  const: 10
+            then:
+              properties:
+                data-shift:
+                  const: 0
+
+        required:
+          - bus-type
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/gpio/gpio.h>
+      #include <dt-bindings/media/video-interfaces.h>
+
+      i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          camera@3c {
+              compatible = "ovti,ov5642";
+              reg = <0x3c>;
+              pinctrl-names = "default";
+              pinctrl-0 = <&pinctrl_ov5642>;
+              clocks = <&clk_ext_camera>;
+              DOVDD-supply = <&vgen4_reg>;
+              AVDD-supply = <&vgen3_reg>;
+              DVDD-supply = <&vgen2_reg>;
+              powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+              reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+
+              port {
+                  ov5642_to_parallel: endpoint {
+                      bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
+                      remote-endpoint = <&parallel_from_ov5642>;
+                      bus-width = <8>;
+                      data-shift = <2>; /* lines 9:2 are used */
+                      hsync-active = <0>;
+                      vsync-active = <0>;
+                      pclk-sample = <1>;
+                  };
+              };
+          };
+      };
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index cd58179ae337..c665018f55b9 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -311,8 +311,6 @@ properties:
           - nuvoton,w83773g
             # OKI ML86V7667 video decoder
           - oki,ml86v7667
-            # OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI and Embedded TrueFocus
-          - ovti,ov5642
             # 48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch
           - plx,pex8648
             # Pulsedlight LIDAR range-finding sensor
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux